feat(debug): add debug read with CSV export

- Parse F1 debug data via family-independent temp formula
  (bits 4-14 scaled by 2**(i-8), sign at bit 0)
- Save sensor+debug temps side-by-side to debug_info.csv
- Wire READ DEBUG button in StatusActionsPanel
- Rename ReplayChart → RunChart; move into GraphTab
- Extract PanelBox/SectionTitle/PanelSlider in ReadoutPanel
  to cut ~300 lines of duplicated styling
- Add rightRailWidth token to Theme for consistent rail sizing
- Wrap ReadoutPanel in ScrollView so Thresholds card stays
  reachable when E-C delta rows appear

.gitignore

@@ -40,3 +40,21 @@ dist/
 *.spec
 *.icns
 *.ico
+
+# Runtime scratch data
+tmp/
+
+# Superpowers brainstorming visual companion
+.superpowers/
+.llm-wiki/
+.agents/
+.pi/
+
+# Planning / personal docs (root level)
+CLAUDE.md
+LEARNINGS.md
+MIGRATION.md
+AGENTS.md
+CONVENTIONS.md
+specs/
+graphify-out/

Makefile

@@ -3,14 +3,14 @@
 install:
 	uv sync
 
-test:
+test: lint
 	uv run pytest tests/
 
 lint:
-	uv run ruff check src/
+	uv run ruff check src/ tests/
 
 fix:
-	uv run ruff check src/ --fix
+	uv run ruff check src/ tests/ --fix
 
 typecheck:
 	uv run mypy src/

README.md

@@ -2,6 +2,38 @@
 
 Small PySide6 + Qt Quick application scaffold for the `ISenseCloud` desktop UI shell.
 
+## Key App Features
+
+The `ISenseCloud` application provides a real-time monitor and analysis dashboard for silicon wafer temperature profiles:
+
+- **Real-Time Data Streaming & Coalescing**: Decodes binary frame streams from thermal sensors over serial/COM connections at ~20 Hz with low CPU overhead.
+- **RBF Heatmap Interpolation**: A Radial Basis Function (RBF) interpolation engine paints a smooth 2D temperature gradient across the wafer surface based on physical sensor locations.
+- **Interactive Review & Playback**: A `FramePlayer` component supports variable-speed playback (play, pause, step, seek) of recorded runs.
+- **Interactive Trend Charts**: Renders multi-series temperature trends using a custom QtQuick painted item (`GraphQuickItem`) with automatic scaling, custom legends, and grid layouts.
+- **Tabular Data Inspection**: Direct inspection of tabular dataset grids for frame-by-frame diagnostic checkups.
+- **Custom Safety Limits & Thresholds**: Configurable alarm thresholds and set-points with automatic alerts when temperatures diverge from normal boundaries.
+
+### App Showcase
+
+![ISenseCloud UI displaying successful connection on COM6](image-1.png)
+*Figure 1: Main Status Dashboard displaying successful connection, active serial communications, and automated logging terminal.*
+
+> [!NOTE]
+> **Take Screenshots for Visual Placeholders:**
+>
+> - **Wafer Heatmap Tab**: Take a screenshot of the Wafer Map tab showing the radial heatmap interpolation, save it to `docs/design/wafer_heatmap_tab.png` and add it here.
+> - **Temperature Trend Graph**: Take a screenshot of the Graph tab plotting multi-sensor trend lines, save it to `docs/design/temp_trend_tab.png` and add it here.
+
+## Key Architectural & Design Decisions
+
+During the refactoring from the flat-layout prototype (`SettingTab` branch) to the unified package application (`main`), the following structural changes were made:
+
+1. **Package Layout Restructuring**: Reorganized flat imports into a clean `src/` layout under `pygui.*` sub-packages (`controllers/`, `models/`, `data/`, `visualization/`, `wafer/`) for better module isolation.
+2. **QML Component Decoupling**: Monolithic pages were refactored into reusable component blocks (e.g., `ReadoutPanel.qml`, `WaferMapView.qml`, `TransportBar.qml` under `src/pygui/ISC/Tabs/components/`), easing tab maintenance.
+3. **Decoupled Controller Architecture**: Introduced QML-bound controllers (`DeviceController`, `SessionController`) acting as bridges between UI triggers and backend model states (`FramePlayer`, `SessionModel`), keeping UI files strictly visual.
+4. **Robust Slot Error Boundaries**: Decorated QML-callable slots with a custom `@slot_error_boundary` wrapper to intercept runtime errors gracefully without terminating the Qt environment.
+5. **Modernized Rendering Engine**: Replaced outdated contour algorithms with Radial Basis Function (RBF) interpolation (`rbf_heatmap.py`) to render high-fidelity, real-time thermal profiles.
+
 ## Requirements
 
 - Python 3.11+ (tested with Python 3.14 in this workspace)
@@ -12,12 +44,15 @@ Small PySide6 + Qt Quick application scaffold for the `ISenseCloud` desktop UI s
 From the project root:
 
 ### Option A: Using `uv` (Recommended)
+
 If you have [uv](https://docs.astral.sh/uv/) installed:
+
 ```bash
 uv sync
 ```
 
 ### Option B: Using `pip`
+
 ```bash
 python3 -m venv .venv
 source .venv/bin/activate   # or .venv\Scripts\activate on Windows
@@ -28,6 +63,8 @@ pip install -e .            # install the `pygui` package (src/ layout) in edita
 
 ## Run
 
+### Launch PySide6 QML App
+
 ```bash
 make run
 ```
@@ -53,6 +90,7 @@ A `Makefile` is provided to simplify common development and verification tasks:
 ### Ruff Configuration
 
 Ruff is configured in `pyproject.toml` to enforce:
+
 - **E/W**: Pycodestyle errors and warnings
 - **F**: Pyflakes linter rules
 - **I**: Import sorting (isort parity)
@@ -78,6 +116,41 @@ The application lives under a `src/` layout as the `pygui` package:
 - `tests/`: pytest suite.
 - `packaging/`: PyInstaller spec (`isc.spec`) and app icons.
 
+## Architecture
+
+```
+┌────────────────────────────────────────────────────────────┐
+│                      QML Layer (src/pygui/ISC/)            │
+│  HomePage.qml  ─  WaferMapTab.qml  ─  DataTab.qml         │
+│  StatusTab.qml  ─  SettingsTab.qml  ─  components/*        │
+└─────────────────────────┬──────────────────────────────────┘
+                          │  Q_PROPERTY / @Slot / Signal
+┌─────────────────────────▼──────────────────────────────────┐
+│                Controller Layer (backend/controllers/)      │
+│  DeviceController  ─  SessionController                    │
+│  (serial ops, status)  (streaming, playback)                │
+└─────────────────────────┬──────────────────────────────────┘
+                          │
+┌─────────────────────────▼──────────────────────────────────┐
+│                  Model Layer (backend/models/)              │
+│  FramePlayer  ─  SessionModel  ─  ReplayStatsTracker       │
+│  ThresholdClassifier  ─  SensorEditor  ─  ClusterAverage   │
+│  TemperatureTableModel                                     │
+└─────────────────────────┬──────────────────────────────────┘
+                          │
+┌─────────────────────────▼──────────────────────────────────┐
+│              Serial / Data Layer (serialcomm/ + data/)      │
+│  SerialPort ─ DeviceService ─ StreamReader ─ data_parser   │
+│  LocalSettings ─ FileBrowser ─ CsvRecorder                 │
+└─────────────────────────┬──────────────────────────────────┘
+                          │
+┌─────────────────────────▼──────────────────────────────────┐
+│              Visualization (backend/visualization/)         │
+│  WaferMapItem  ─  GraphView  ─  TrendChartItem             │
+│  RBFHeatmap  ─  WaferMapView (QML wrapper)                 │
+└────────────────────────────────────────────────────────────┘
+```
+
 ## Window Configuration
 
 Window dimensions and constraints are defined in `src/pygui/ISC/Main.qml`:
@@ -109,11 +182,13 @@ Window {
 - If the app does not start, verify the virtual environment is active and dependencies are installed:
 
   *Using `uv`:*
+
   ```bash
   uv sync
   ```
 
   *Using `pip`:*
+
   ```bash
   source .venv/bin/activate   # or .venv\Scripts\activate on Windows
   pip install -r requirements.txt
@@ -122,17 +197,20 @@ Window {
 - If no window appears, ensure you are running in a desktop session with GUI access.
 
 - **Windows COM Port Connection Issues:**
-  * Standard Windows serial drivers don't support custom baud rates (e.g. `888888`), throwing an expected `OSError(22)` warning before falling back to `115200` baud.
+  - Standard Windows serial drivers don't support custom baud rates (e.g. `888888`), throwing an expected `OSError(22)` warning before falling back to `115200` baud.
 
 ### Step-by-Step Windows Simulator Connection Guide
 
 #### Step 1: Create the Virtual Serial Port Bridge
+
 Open **HHD Virtual Serial Port Tools**. Under the **Local Bridges** panel on the left, click the green **`+`** (Add) button to create a new port pair. Configure it to bridge **`COM5 ↔ COM6`**.
 
 ![HHD Virtual Serial Port Tools showing COM5 ↔ COM6 Local Bridge](image.png)
 
 #### Step 2: Configure and Start the Wafer Simulator
+
 Launch the **Wafer Simulator Control Panel** (`wafer_sim_gui.py`):
+
 1. Set the **Serial Port** to **`COM5`**.
 2. **Uncheck** the `Auto-create Virtual Port (com0com)` checkbox.
 3. Choose your desired **Wafer Type** (e.g., `aepwafer`) and **Family Code** (e.g., `A`).
@@ -141,6 +219,7 @@ Launch the **Wafer Simulator Control Panel** (`wafer_sim_gui.py`):
 ![Wafer Simulator Control Panel configured on COM5 and streaming](image-2.png)
 
 #### Step 3: Run the UI and Connect
+
 Launch the `pygui` client application. On the left navigation rail, click **DETECT WAFER**. The application will scan all active COM ports, automatically detect the virtual wafer simulator on **`COM6`**, and update the status indicator to **Connected** (green).
 
 ![ISenseCloud UI displaying successful connection on COM6](image-1.png)

pyproject.toml

@@ -18,6 +18,7 @@ dependencies = [
     "scipy>=1.17.1",
     "pyyaml>=6.0.3",
     "dtw-python",
+    "cryptography>=41.0",
 ]
 
 [project.optional-dependencies]

src/pygui/ISC/AboutDialog.qml

@@ -0,0 +1,203 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Dialogs
+import QtQuick.Layouts
+import ISC
+
+Popup {
+    id: root
+    modal: true
+    dim: true
+    closePolicy: Popup.CloseOnEscape | Popup.CloseOnPressOutside
+    width: 600
+    height: 500
+    anchors.centerIn: Overlay.overlay
+
+    onOpened: licenseModel.refresh()
+
+    background: Rectangle {
+        radius: Theme.radiusMd
+        color: Theme.cardBackground
+        border.color: Theme.cardBorder
+        border.width: 1
+    }
+
+    FileDialog {
+        id: licenseFileDialog
+        title: "Load License"
+        nameFilters: ["License files (*.bin)"]
+        onAccepted: loadFailedLabel.visible = !licenseModel.loadLicenseFile(selectedFile.toString())
+    }
+
+    ColumnLayout {
+        anchors.fill: parent
+        anchors.margins: 28
+        spacing: 20
+
+        // ── Title ──
+        Label {
+            text: "About"
+            font.pixelSize: Theme.font2xl
+            font.bold: true
+            color: Theme.headingColor
+        }
+
+        // ── App info ──
+        ColumnLayout {
+            spacing: 6
+
+            Label {
+                text: "ISenseCloud"
+                font.pixelSize: Theme.fontXl
+                font.bold: true
+                color: Theme.headingColor
+            }
+
+            Label {
+                text: "Version " + appVersion
+                font.pixelSize: Theme.fontMd
+                color: Theme.bodyColor
+            }
+        }
+
+        // ── Separator ──
+        Rectangle {
+            Layout.fillWidth: true
+            height: 1
+            color: Theme.cardBorder
+        }
+
+        // ── License grid ──
+        Rectangle {
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            Layout.minimumHeight: 150
+            radius: Theme.radiusSm
+            color: Theme.panelBackground
+            border.color: Theme.cardBorder
+            border.width: 1
+
+            ColumnLayout {
+                anchors.fill: parent
+                anchors.margins: 14
+                spacing: 6
+
+                RowLayout {
+                    Layout.fillWidth: true
+
+                    Label {
+                        text: "LICENSE"
+                        color: Theme.panelTitleText
+                        font.pixelSize: Theme.fontSm
+                        font.bold: true
+                        font.letterSpacing: 0.5
+                        Layout.fillWidth: true
+                    }
+
+                    Label {
+                        id: loadFailedLabel
+                        visible: false
+                        text: "Invalid license file"
+                        color: Theme.statusWarningColor
+                        font.pixelSize: Theme.fontSm
+                    }
+                }
+
+                // Grid header
+                RowLayout {
+                    Layout.fillWidth: true
+                    spacing: 8
+                    Label { text: "Wafer SN"; font.pixelSize: Theme.fontSm; font.bold: true; color: Theme.subheadingColor; Layout.preferredWidth: 150 }
+                    Label { text: "Mfg Date"; font.pixelSize: Theme.fontSm; font.bold: true; color: Theme.subheadingColor; Layout.preferredWidth: 120 }
+                    Label { text: "Level"; font.pixelSize: Theme.fontSm; font.bold: true; color: Theme.subheadingColor; Layout.preferredWidth: 80 }
+                    Label { text: "License Date"; font.pixelSize: Theme.fontSm; font.bold: true; color: Theme.subheadingColor; Layout.fillWidth: true }
+                }
+
+                Rectangle {
+                    Layout.fillWidth: true
+                    height: 1
+                    color: Theme.softBorder
+                }
+
+                ListView {
+                    Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    clip: true
+                    visible: licenseModel.licenses.length > 0
+                    model: licenseModel.licenses
+                    delegate: RowLayout {
+                        width: ListView.view.width
+                        spacing: 8
+                        Label { text: modelData.serial; font.pixelSize: Theme.fontMd; color: Theme.bodyColor; Layout.preferredWidth: 150 }
+                        Label { text: modelData.mfgDate; font.pixelSize: Theme.fontMd; color: Theme.bodyColor; Layout.preferredWidth: 120 }
+                        Label { text: modelData.level; font.pixelSize: Theme.fontMd; color: Theme.bodyColor; Layout.preferredWidth: 80 }
+                        Label { text: modelData.licDate; font.pixelSize: Theme.fontMd; color: Theme.bodyColor; Layout.fillWidth: true }
+                    }
+                }
+
+                Label {
+                    visible: licenseModel.licenses.length === 0
+                    text: "No license loaded"
+                    color: Theme.bodyColor
+                    font.pixelSize: Theme.fontMd
+                    Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    verticalAlignment: Text.AlignVCenter
+                    horizontalAlignment: Text.AlignHCenter
+                }
+            }
+        }
+
+        // ── Buttons ──
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 12
+
+            Button {
+                text: "Load License"
+                Layout.preferredWidth: 140
+                Layout.preferredHeight: 36
+                onClicked: licenseFileDialog.open()
+
+                background: Rectangle {
+                    radius: Theme.radiusSm
+                    color: parent.hovered ? Theme.buttonNeutralHover : Theme.buttonNeutralBackground
+                    border.color: Theme.fieldBorder
+                    border.width: 1
+                }
+                contentItem: Label {
+                    text: parent.text
+                    color: Theme.buttonNeutralText
+                    font.pixelSize: Theme.fontMd
+                    font.bold: true
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
+                }
+            }
+
+            Item { Layout.fillWidth: true }
+
+            Button {
+                text: "Close"
+                Layout.preferredWidth: 100
+                Layout.preferredHeight: 36
+                onClicked: root.close()
+
+                background: Rectangle {
+                    radius: Theme.radiusSm
+                    color: parent.hovered ? Theme.buttonNeutralHover : Theme.buttonNeutralBackground
+                    border.color: Theme.fieldBorder
+                    border.width: 1
+                }
+                contentItem: Label {
+                    text: parent.text
+                    color: Theme.buttonNeutralText
+                    font.pixelSize: Theme.fontMd
+                    font.bold: true
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
+                }
+            }
+        }
+    }
+}

src/pygui/ISC/HomePage.qml

@@ -1,10 +1,14 @@
 import QtQuick
 import QtQuick.Controls
+import QtQuick.Controls.impl
 import QtQuick.Layouts
 import ISC
+import ISC.Tabs.components
 import QtQuick.Dialogs
 
 // ===== Home Workspace Shell =====
+// Unified left rail: pill tab bar → context panel → status footer → utility buttons.
+// Workspace fills the remaining area with the active tab's content.
 Rectangle {
     id: root
     anchors.fill: parent
@@ -13,59 +17,60 @@ Rectangle {
     border.color: Theme.outerFrameBorder
     border.width: Theme.borderStrong
 
-    // ===== Navigation Model =====
-    // ---------------------------------------------------------------------------
-    // TODO P1.1: Delete these 3 property blocks — superseded by mockup rail
-    //
-    // THINKING:
-    //   The new rail uses a pill-tab-bar for navigation (Status/Data/Map) instead
-    //   of sideActions[] + bottomTabs[]. The Repeaters below that consume these
-    //   arrays are also deleted with the old layout (P1.1).
-    //   selectedSideActionIndex is dead — the new rail has no concept of a
-    //   globally-selected side action. selectedTabIndex stays, redefined below.
-    //
-    //   Cross-ref: P1.2 (pill tabs), P1.3 (context panels), P1.4 (workspace)
-    // ---------------------------------------------------------------------------
-    property var sideActions: ["DETECT WAFER", "READ MEMORY", "ERASE MEMORY"]
-
-    // ===== Footer Tab Model =====
-    property var bottomTabs: ["Status", "Data", "Wafer Map", "Settings"]
-
     // ===== View State =====
     property int selectedTabIndex: 0
-    property int selectedSideActionIndex: -1
+    onSelectedTabIndexChanged: {
+        if (selectedTabIndex === 2) {
+            file_browser.refreshFiles();
+            streamController.unloadFile()
+        } else if (streamController.mode === "live") {
+            // Leaving the map tab mid-stream: stop and blank the live map.
+            streamController.setMode("review")
+        }
+    }
+
+
 
     property bool memoryRead: false
     property bool waferDetected: false
+    // TODO P2.2: add `property bool waferLicensed: false`; set it in
+    //   onDetectResult below via deviceController.waferLicensed() (slot from
+    //   P1.2 — the detectResult payload is opaque in QML, can't read serial
+    //   from it). Then READ/ERASE buttons get
+    //   `enabled: root.waferDetected && root.waferLicensed`.
+    //   See docs/pending/license-gating-plan.md §2.2.
 
     Connections {
         target: deviceController
         function onDetectResult(result){
-            //result is a waferInfo dict on success, None on failure
+            // detectResult payload is Signal(object): a dict may cross into QML
-            root.waferDetected = (result != null && result!= undefined)
+            // as an opaque wrapper whose fields read as undefined, so only
+            // test truthiness (None on failure, dict on success).
+            root.waferDetected = !!result
         }
         function onParsedDataReady(result) {
             if (result.success && result.csv_path) {
-                // Load the freshly read CSV into the player
                 streamController.loadFile(result.csv_path)
-
+                // TODO P3.1: only auto-jump to Map when unlocked:
-                // Automatically switch to the "Wafer Map Tab"  (index 3)
+                //   `&& licenseModel.licenses.length > 0` — otherwise a
-                root.selectedTabIndex = 3
+                //   successful read walks straight into the locked tab.
+                //   See plan §3.1.
+                if (root.selectedTabIndex === 0) {
+                root.selectedTabIndex = 2
+                }
             }
         }
     }
     Connections {
         target: deviceController
         function onReadResult(result) {
-           // result has "success" key on success, "error" key on failure
             root.memoryRead = (result !== null &&
                                result !== undefined &&
                                result.success === true)
-
             if (root.memoryRead) {
-               console.log(`[P1.1] Memory read complete: ${result.bytes} bytes`)
+                console.log("[P1.1] Memory read complete:", result.bytes, "bytes")
             } else {
-               console.log(`[P1.1] Read failed: ${result.error || "unknown"}`)
+                console.log("[P1.1] Read failed:", result.error || "unknown")
             }
         }
     }
@@ -76,6 +81,7 @@ Rectangle {
 
     function _doDetect() {
         root.memoryRead = false
+        root.waferDetected = false
         streamController.setMode("review")
         streamController.stopStream()
         deviceController.detectWafer()
@@ -85,303 +91,572 @@ Rectangle {
         id: saveDirDialog
         title: "Choose a folder to save Data"
         onAccepted: {
-            deviceController.setSaveDataDir(root.cleanFolderUrl(selectedFolder))
+            var dir = root.cleanFolderUrl(selectedFolder)
+            deviceController.setSaveDataDir(dir)
+            file_browser.setCurrentDirectory(dir)
             root._doDetect()
         }
     }
 
-    // ---------------------------------------------------------------------------
+    // ===== Split Dialog (Threshold Segmentation) =====
-    // TODO P1.1: Delete importFileDialog + storedDataDialog (and the
+    SplitDialog {
-    //            `selectedTabIndex = 3` lines inside them)
+        id: splitDialog
-    //
+    }
-    // THINKING:
+
-    //   These dialogs were only opened from the old side-rail buttons
+    // ===== Settings Popup =====
-    //   "IMPORT DATA" (index 4) and "STORED DATA" (index 5). With the
+    Popup {
-    //   mockup rail, the Map tab's file list (P1.3) replaces both — it
+        id: settingsPopup
-    //   drives `streamController.loadFile()` directly from a file_browser
+        modal: true
-    //   Repeater. Keeping these dead dialogs would bloat the QML and
+        dim: true
-    //   confuse future contributors.
+        closePolicy: Popup.CloseOnEscape | Popup.CloseOnPressOutside
-    //
+        width: Math.min(root.width - 80, 800)
-    //   `selectedTabIndex = 3` is also stale (Map tab is index 2 now).
+        height: Math.min(root.height - 80, 600)
-    //   The replacement flow: file_row.onClicked → loadFile() →
+        anchors.centerIn: Overlay.overlay
-    //   selectedTabIndex = 2.
+
-    // ---------------------------------------------------------------------------
+        background: Rectangle {
-    FileDialog {
+            radius: Theme.radiusMd
-        id: importFileDialog
+            color: Theme.cardBackground
-        title: "Import CSV / ZWafer file"
+            border.color: Theme.cardBorder
-        nameFilters: ["CSV files (*.csv)", "ZWafer files (*.zwafer)", "All files (*)"]
+            border.width: 1
-        onAccepted: {
+        }
-            var path = root.cleanFolderUrl(selectedFile)
+
-            streamController.setMode("review")
+        contentItem: Rectangle {
-            streamController.stopStream()
+            color: Theme.pageBackground
-            streamController.loadFile(path)
+            radius: Theme.radiusMd
-            root.selectedTabIndex = 3  // Switch to Wafer Map tab
+            clip: true
-            root.selectedSideActionIndex = -1
+
+            ColumnLayout {
+                anchors.fill: parent
+                spacing: 0
+
+                Rectangle {
+                    Layout.fillWidth: true
+                    Layout.preferredHeight: 40
+                    color: Theme.panelBackground
+                    border.color: Theme.cardBorder
+                    border.width: 1
+                    radius: Theme.radiusMd
+
+                    RowLayout {
+                        anchors.fill: parent
+                        anchors.leftMargin: 14
+                        anchors.rightMargin: 4
+
+                        Label {
+                            text: "Settings"
+                            font.pixelSize: Theme.fontLg
+                            font.bold: true
+                            color: Theme.headingColor
+                            Layout.fillWidth: true
+                        }
+
+                        Button {
+                            text: "\u2715"
+                            flat: true
+                            Layout.preferredWidth: 32
+                            Layout.preferredHeight: 32
+                            onClicked: settingsPopup.close()
+
+                            background: Rectangle {
+                                radius: Theme.radiusXs
+                                color: parent.hovered ? Theme.buttonNeutralHover : "transparent"
+                            }
+                            contentItem: Label {
+                                text: parent.text
+                                color: Theme.bodyColor
+                                horizontalAlignment: Text.AlignHCenter
+                                verticalAlignment: Text.AlignVCenter
+                            }
+                        }
                     }
                 }
 
-    FileDialog {
+                Item {
-        id: storedDataDialog
+                    Layout.fillWidth: true
-        title: "Open Stored CSV File"
+                    Layout.fillHeight: true
-        nameFilters: ["CSV files (*.csv)", "All files (*)"]
+                    Layout.rightMargin: 6
-        onAccepted: {
+                    clip: true
-            var path = root.cleanFolderUrl(selectedFile)
+
-            streamController.setMode("review")
+                    Loader {
-            streamController.stopStream()
+                        anchors.fill: parent
-            streamController.loadFile(path)
+                        source: "Tabs/SettingsTab.qml"
-            root.selectedTabIndex = 3  // Switch to Wafer Map tab
+                    }
-            root.selectedSideActionIndex = -1
+                }
+            }
         }
     }
 
-    // ===== Main Two-Column Layout ======
+    // ===== About Dialog =====
-    // ---------------------------------------------------------------------------
+    AboutDialog {
-    // TODO P1.1: Delete the ENTIRE RowLayout below (lines ~112-341) — old
+        id: aboutDialog
-    //            side-rail + workspace + footer-tab-strip.
+    }
-    //
+
-    // THINKING:
+    // ===== Main Layout: Rail + Workspace =====
-    //   This ~230-line RowLayout is being replaced by:
-    //     P1.2 — Pill tab bar (BOX 1, top of rail)
-    //     P1.3 — Context-sensitive panel (BOX 2, mid rail)
-    //     P1.5 — Hardware status footer (BOX 3, below BOX 2)
-    //     P1.6 — Settings/About utility buttons (BOX 4, rail bottom)
-    //     P1.4 — Workspace StackLayout (fills right side)
-    //
-    //   None of the old structure (Repeater for sideActions[], Repeater for
-    //   bottomTabs[], footer tab strip) survives. Keeping it would cause
-    //   double-rendering or visual conflicts.
-    //
-    //   Keep: saveDirDialog (FolderDialog), cleanFolderUrl(), _doDetect(),
-    //         and all Connections blocks (lines 31-61).
-    //
-    //   Cross-ref: P1.2, P1.3, P1.4, P1.5, P1.6
-    // ---------------------------------------------------------------------------
     RowLayout {
         anchors.fill: parent
         spacing: 0
 
-        // ===== Left Action Rail =====
+        // ── LEFT RAIL ──────────────────────────────────────────────────────
-        // Left control rail.
         Rectangle {
-            id: sideRail
+            id: rail
             Layout.preferredWidth: Theme.sideRailWidth
             Layout.fillHeight: true
             color: Theme.sideRailBackground
-            border.color: Theme.workspaceBorder
-            border.width: Theme.borderThin
-
-            readonly property int actionCount: root.sideActions.length
-            readonly property real computedButtonHeight: Math.min(Theme.sideButtonHeight, (height - (Theme.panelPadding * 2) - (Theme.sideRailSpacing * Math.max(0, actionCount - 1))) / Math.max(1, actionCount))
 
             ColumnLayout {
                 anchors.fill: parent
-                anchors.margins: Theme.panelPadding
+                anchors.margins: Theme.sideRailMargin
                 spacing: Theme.sideRailSpacing
 
-                Repeater {
+                // ── BOX 1: Pill Tab Bar ─────────────────────────────────────
-                    model: root.sideActions
+                Rectangle {
-
+                    id: pillBar
-                    Button {
-                        id: control
-                        text: modelData
-                        enabled: {
-                            switch (index) {
-                                case 0: return true              // DETECT WAFER
-                                case 1: return root.waferDetected // READ MEMORY
-                                case 2: return root.waferDetected // ERASE MEMORY
-                                default: return true
-                            }
-                        }
-                        property bool isActive: index === root.selectedSideActionIndex
                     Layout.fillWidth: true
-                        Layout.preferredHeight: Math.max(Theme.sideButtonMinHeight, sideRail.computedButtonHeight)
+                    Layout.preferredHeight: Theme.sidePillHeight
-                        hoverEnabled: true
+                    radius: 999
-                        onClicked: {
+                    border.color: Theme.sideBorder
-                            root.selectedSideActionIndex = index
+                    border.width: 1
-                            root.selectedTabIndex = 0          // always jump to Status tab
+                    color: "transparent"
-                            if (index === 0) {
+
-                                if (!deviceController.saveDataDir) {
+                    ListModel {
-                                    saveDirDialog.open()
+                        id: pillModel
-                                    return
+                        ListElement {
+                            label: "STATUS"
+                            icon: "Tabs/icons/status.svg"
+                            expandW: 86
+                            desc: "Monitor real-time device connection, serial communication, and execute wafer actions."
                         }
-                                root._doDetect()
+                        ListElement {
+                            label: "DATA"
+                            icon: "Tabs/icons/data.svg"
+                            expandW: 66
+                            desc: "Manage, review, compare (DTW), and split historical sensor data records."
                         }
-                            else if (index === 1) {
+                        ListElement {
-                                streamController.setMode("review")
+                            label: "MAP"
-                                streamController.stopStream()
+                            icon: "Tabs/icons/map.svg"
-                                deviceController.readMemoryAsync()
+                            expandW: 58
+                            desc: "Visualize spatial sensor readings on a 2D thin-plate spline RBF interpolated heatmap."
                         }
-                            else if (index === 2) {
+                        ListElement {
-                                // ERASE MEMORY
+                            label: "GRAPH"
-                                streamController.setMode("review")
+                            icon: "Tabs/icons/bar-chart.svg"
-                                streamController.stopStream()
+                            expandW: 70
-                                deviceController.eraseMemory(deviceController.selectedPort || "")
+                            desc: "Whole-run multi-sensor temperature chart for the currently loaded file."
                         }
                     }
 
+                    RowLayout {
+                        anchors.fill: parent
+                        anchors.margins: 3
+                        spacing: 0
+
+                        Repeater {
+                            model: pillModel
+                            delegate: Button {
+                                id: pillBtn
+                                checked: root.selectedTabIndex === index
+                                flat: true
+                                Layout.fillWidth: true
+                                Layout.fillHeight: true
+                                Layout.preferredWidth: pillBtn.checked ? model.expandW : 44
+                                Behavior on Layout.preferredWidth {
+                                    NumberAnimation { duration: 200; easing.type: Easing.OutCubic }
+                                }
+
                                 background: Rectangle {
-                            color: {
+                                    radius: 50
-                                if (control.down) {
+                                    color: pillBtn.checked ? Theme.sidePanelBackground : "transparent"
-                                    return Theme.buttonPressed;
+                                    Behavior on color {
+                                        ColorAnimation { duration: Theme.durationFast }
                                     }
-                                if (control.isActive) {
-                                    return Theme.sideActiveBackground;
                                 }
-                                return "transparent";
+
+                                contentItem: Row {
+                                    id: pillContent
+                                    spacing: pillBtn.checked ? 6 : 0
+                                    width: pillIcon.width + (pillBtn.checked ? pillContent.spacing + pillLabel.width : 0)
+                                    anchors.verticalCenter: parent.verticalCenter
+                                    x: (parent.width - width) / 2
+                                    Behavior on x {
+                                        NumberAnimation { duration: 200; easing.type: Easing.OutCubic }
                                     }
-                            border.color: control.isActive ? Theme.cardBorder : "transparent"
+
+                                    IconImage {
+                                        id: pillIcon
+                                        anchors.verticalCenter: parent.verticalCenter
+                                        width: 16; height: 16
+                                        source: model.icon
+                                        sourceSize.width: 16; sourceSize.height: 16
+                                        color: pillBtn.checked ? Theme.headingColor
+                                             : pillBtn.hovered ? Qt.lighter(Theme.sideMutedText, 1.7)
+                                             : Theme.sideMutedText
+                                        opacity: pillBtn.checked ? 0.9 : pillBtn.hovered ? 0.7 : 0.4
+                                        Behavior on color {
+                                            ColorAnimation { duration: Theme.durationFast }
+                                        }
+                                        Behavior on opacity {
+                                            NumberAnimation { duration: Theme.durationFast }
+                                        }
+                                    }
+
+                                    Label {
+                                        id: pillLabel
+                                        anchors.verticalCenter: parent.verticalCenter
+                                        width: pillBtn.checked ? implicitWidth : 0
+                                        text: model.label
+                                        color: pillBtn.checked ? Theme.headingColor : Theme.sideMutedText
+                                        font.family: Theme.uiFontFamily
+                                        font.pixelSize: Theme.fontSm
+                                        font.bold: true
+                                        font.letterSpacing: 1.0
+                                        opacity: pillBtn.checked ? 1.0 : 0.0
+                                        clip: true
+                                        Behavior on width {
+                                            NumberAnimation { duration: 200; easing.type: Easing.OutCubic }
+                                        }
+                                        Behavior on color {
+                                            ColorAnimation { duration: Theme.durationBase; easing.type: Theme.easeStandard }
+                                        }
+                                        Behavior on opacity {
+                                            NumberAnimation { duration: 200; easing.type: Easing.OutCubic }
+                                        }
+                                    }
+                                }
+
+                                AppToolTip {
+                                    visible: pillBtn.hovered
+                                    text: "<b>" + model.label + "</b>: " + model.desc
+                                }
+
+                                onClicked: root.selectedTabIndex = index
+                            }
+                        }
+                    }
+                }
+
+                // ── BOX 1.5: Run Comparison (Data tab only) ────────────────
+                Rectangle {
+                    id: runComparisonBox
+                    Layout.fillWidth: true
+                    Layout.preferredHeight: runCompCol.implicitHeight + 28
+                    visible: root.selectedTabIndex === 1
+                    radius: Theme.sidePanelRadius
+                    border.color: Theme.sideBorder
                     border.width: 1
+                    color: Theme.sidePanelBackground
+
+                    readonly property var dataTab: dataTabLoader.item
+
+                    component RunSlot: Rectangle {
+                        id: slotBox
+                        property string title
+                        property string filePath: ""
+                        property color accent: Theme.primaryAccent
+                        property bool active: false
+                        property bool locked: false
+                        property string placeholderText: "Click to select"
+                        signal cleared()
+                        signal armed()
+
+                        Layout.fillWidth: true
+                        implicitHeight: 58
                         radius: Theme.radiusSm
+                        color: Theme.fieldBackground
+                        opacity: slotBox.locked ? 0.65 : 1.0
+                        border.width: slotBox.active ? 2 : 1
+                        border.color: slotBox.active ? accent : Theme.sideBorder
+
+                        Behavior on border.color { ColorAnimation { duration: Theme.durationFast } }
+
+                        MouseArea {
+                            anchors.fill: parent
+                            enabled: !slotBox.locked
+                            cursorShape: slotBox.locked ? Qt.ArrowCursor : Qt.PointingHandCursor
+                            onClicked: slotBox.armed()
+                        }
+
+                        RowLayout {
+                            anchors.fill: parent
+                            anchors.margins: 10
+                            spacing: 8
 
                             Rectangle {
-                                anchors.left: parent.left
+                                width: 8; height: 8; radius: 4
-                                anchors.top: parent.top
+                                color: slotBox.accent
-                                anchors.bottom: parent.bottom
+                                Layout.alignment: Qt.AlignVCenter
-                                width: 3
+                            }
-                                visible: control.isActive
+
-                                color: Theme.primaryAccent
+                            ColumnLayout {
-                                radius: Theme.radiusXs
+                                Layout.fillWidth: true
+                                spacing: 2
+                                Label {
+                                    text: slotBox.title
+                                    font.pixelSize: Theme.fontXs
+                                    font.bold: true
+                                    font.letterSpacing: 1.0
+                                    color: slotBox.active ? slotBox.accent : Theme.sideMutedText
+                                }
+                                Label {
+                                    text: slotBox.filePath !== ""
+                                        ? slotBox.filePath.split("/").pop()
+                                        : (slotBox.locked ? slotBox.placeholderText : (slotBox.active ? "<- Select file below..." : "Click to select"))
+                                    font.pixelSize: Theme.fontSm
+                                    color: slotBox.filePath !== "" ? Theme.headingColor : Theme.bodyColor
+                                    opacity: slotBox.filePath !== "" ? 1.0 : 0.6
+                                    elide: Text.ElideMiddle
+                                    Layout.fillWidth: true
                                 }
                             }
 
-                        contentItem: Text {
+                            Button {
-                            text: control.text
+                                visible: slotBox.filePath !== "" && !slotBox.locked
-                            color: control.isActive ? Theme.headingColor : Theme.bodyColor
+                                flat: true
-                            font.bold: control.isActive
+                                implicitWidth: 24; implicitHeight: 24
-                            font.pixelSize: 18
+                                onClicked: slotBox.cleared()
-                            wrapMode: Text.WordWrap
+                                background: Rectangle {
-                            horizontalAlignment: Text.AlignHCenter
+                                    radius: Theme.radiusSm
-                            verticalAlignment: Text.AlignVCenter
+                                    color: parent.hovered ? Theme.flatButtonHover : "transparent"
+                                }
+                                contentItem: IconImage {
+                                    source: "Tabs/icons/x.svg"
+                                    width: 14; height: 14
+                                    sourceSize.width: 14
+                                    sourceSize.height: 14
+                                    color: Theme.bodyColor
+                                    anchors.centerIn: parent
+                                }
+                            }
+                        }
+                    }
+
+                    ColumnLayout {
+                        id: runCompCol
+                        anchors.fill: parent
+                        anchors.margins: 14
+                        spacing: 10
+
+                        RowLayout {
+                            Layout.fillWidth: true
+                            spacing: 8
+
+                            Label {
+                                text: "RUN COMPARISON (DTW)"
+                                color: Theme.sideMutedText
+                                font.family: Theme.uiFontFamily
+                                font.pixelSize: Theme.fontSm
+                                font.letterSpacing: 1.5
+                                font.bold: true
+                                Layout.fillWidth: true
+                                elide: Text.ElideRight
+                            }
+
+                            Button {
+                                id: resetRunBtn
+                                flat: true
+                                implicitWidth: 32
+                                implicitHeight: 32
+                                visible: true
+                                onClicked: if (runComparisonBox.dataTab) runComparisonBox.dataTab.resetComparison()
+
+                                background: Rectangle {
+                                    radius: Theme.radiusSm
+                                    color: resetRunBtn.hovered ? Theme.flatButtonHover : "transparent"
+                                }
+                                contentItem: IconImage {
+                                    source: "Tabs/icons/rotate-ccw.svg"
+                                    width: 18; height: 18
+                                    sourceSize.width: 18
+                                    sourceSize.height: 18
+                                    color: Theme.bodyColor
+                                    anchors.centerIn: parent
+                                }
+                                AppToolTip {
+                                    visible: resetRunBtn.hovered
+                                    text: "Reset comparison"
+                                }
+                            }
+                        }
+
+                        PanelCheckBox {
+                            id: useMasterCheck
+                            Layout.fillWidth: true
+                            text: "Compare vs Master File"
+                            checked: runComparisonBox.dataTab ? runComparisonBox.dataTab.useMasterFile : false
+                            onToggled: {
+                                if (!runComparisonBox.dataTab) return
+                                runComparisonBox.dataTab.useMasterFile = checked
+                                if (checked) runComparisonBox.dataTab.activeBox = 2
+                            }
+                        }
+
+                        RunSlot {
+                            readonly property bool useMaster: runComparisonBox.dataTab ? runComparisonBox.dataTab.useMasterFile : false
+                            title: useMaster ? "MASTER FILE" : "REFERENCE (RUN A)"
+                            accent: Theme.primaryAccent
+                            locked: useMaster
+                            placeholderText: useMaster
+                                ? (runComparisonBox.dataTab.runBWaferType !== ""
+                                    ? "No master file for type " + runComparisonBox.dataTab.runBWaferType
+                                    : "Select Run B to resolve master")
+                                : "Click to select"
+                            active: runComparisonBox.dataTab ? (!useMaster && runComparisonBox.dataTab.activeBox === 1) : false
+                            filePath: runComparisonBox.dataTab
+                                ? (useMaster ? runComparisonBox.dataTab.masterFileForRunB : runComparisonBox.dataTab.compareFileA)
+                                : ""
+                            onArmed: if (runComparisonBox.dataTab && !useMaster) runComparisonBox.dataTab.activeBox = 1
+                            onCleared: {
+                                if (!runComparisonBox.dataTab) return
+                                runComparisonBox.dataTab.compareFileA = ""
+                                runComparisonBox.dataTab.activeBox = 1
+                                runComparisonBox.dataTab.clearResults()
+                            }
+                        }
+
+                        RunSlot {
+                            title: "SESSION (RUN B)"
+                            accent: Theme.themeSkill
+                            active: runComparisonBox.dataTab ? runComparisonBox.dataTab.activeBox === 2 : false
+                            filePath: runComparisonBox.dataTab ? runComparisonBox.dataTab.compareFileB : ""
+                            onArmed: if (runComparisonBox.dataTab) runComparisonBox.dataTab.activeBox = 2
+                            onCleared: {
+                                if (!runComparisonBox.dataTab) return
+                                runComparisonBox.dataTab.compareFileB = ""
+                                runComparisonBox.dataTab.activeBox = 2
+                                runComparisonBox.dataTab.clearResults()
+                            }
+                        }
+
+                        Button {
+                            id: compareRunBtn
+                            Layout.fillWidth: true
+                            Layout.preferredHeight: 32
+                            readonly property var dt: runComparisonBox.dataTab
+                            readonly property string fileA: !!dt ? (dt.useMasterFile ? dt.masterFileForRunB : dt.compareFileA) : ""
+                            readonly property bool masterMissing: !!dt && dt.useMasterFile && dt.masterFileForRunB === ""
+                            readonly property bool sameFile: !!dt && fileA !== "" && fileA === dt.compareFileB
+                            readonly property string gateError: !!dt ? dt.familyGateError : ""
+                            enabled: !!dt && fileA !== "" && dt.compareFileB !== "" && !sameFile && !dt.comparing && !masterMissing && gateError === ""
+                            AppToolTip {
+                                visible: (compareRunBtn.sameFile || compareRunBtn.masterMissing || compareRunBtn.gateError !== "") && compareRunBtn.hovered
+                                text: compareRunBtn.masterMissing
+                                    ? "No master file registered for this wafer type (Settings → Master Files)"
+                                    : compareRunBtn.gateError !== "" ? compareRunBtn.gateError
+                                    : "Choose two different runs to compare"
+                            }
+                            onClicked: {
+                                dt.comparing = true
+                                dt.clearResults()
+                                streamController.compareFiles(fileA, dt.compareFileB)
+                            }
+
+                            background: Rectangle {
+                                radius: Theme.radiusSm
+                                color: compareRunBtn.enabled
+                                    ? (compareRunBtn.hovered ? Qt.lighter(Theme.primaryAccent, 1.1) : Theme.primaryAccent)
+                                    : Theme.buttonNeutralBackground
+                                Behavior on color { ColorAnimation { duration: Theme.durationFast } }
+                            }
+                            contentItem: Row {
+                                spacing: 8
+                                anchors.centerIn: parent
+                                Label {
+                                    anchors.verticalCenter: parent.verticalCenter
+                                    text: !compareRunBtn.dt ? "Select both runs"
+                                        : compareRunBtn.dt.comparing
+                                            ? "Comparing…"
+                                            : compareRunBtn.enabled
+                                                ? "Run DTW Comparison"
+                                                : (compareRunBtn.masterMissing ? "No master for this type"
+                                                    : compareRunBtn.sameFile ? "Choose different runs"
+                                                    : compareRunBtn.gateError !== "" ? "Wafer family mismatch"
+                                                    : "Select both runs")
+                                    color: compareRunBtn.enabled ? Theme.tone100 : Theme.sideMutedText
+                                    font.pixelSize: Theme.fontSm
+                                    font.bold: true
+                                }
+                                BusyIndicator {
+                                    running: !!compareRunBtn.dt && compareRunBtn.dt.comparing
+                                    visible: !!compareRunBtn.dt && compareRunBtn.dt.comparing
+                                    width: 14; height: 14
+                                    anchors.verticalCenter: parent.verticalCenter
                                 }
                             }
                         }
                     }
                 }
 
-        // Main workspace and footer navigation.
+                // ── BOX 2: Context-Sensitive Rail Panel ────────────────────
+                StackLayout {
+                    Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    Layout.minimumHeight: 120
+                    currentIndex: root.selectedTabIndex === 0 ? 0 : 1
+
+                    // ── Status tab: Hardware Actions + Log Actions ──────────
+                    StatusActionsPanel {
+                        Layout.fillWidth: true
+                        Layout.fillHeight: true
+                    }
+
+                    // ── Map tab: Source file browser ──────────────
+                    Rectangle {
+                        radius: Theme.sidePanelRadius
+                        border.color: Theme.sideBorder
+                        border.width: 1
+                        color: Theme.sidePanelBackground
+
+                        SourcePanel {
+                            anchors.fill: parent
+                            anchors.margins: 14
+                        }
+                    }
+                }
+
+                // ── BOX 3: Hardware Status Footer ──────────────────────────
+                ConnectionFooter {
+                    Layout.fillWidth: true
+                }
+
+                // ── BOX 4: Utility Buttons ─────────────────────────────────
+                UtilityFooter {
+                    id: utilFooter
+                    Layout.fillWidth: true
+                    settingsPopup: settingsPopup
+                    aboutDialog: aboutDialog
+                }
+            }
+        }
+
+        // ── WORKSPACE ─────────────────────────────────────────────────────
         Rectangle {
             Layout.fillWidth: true
             Layout.fillHeight: true
             color: Theme.workspaceBackground
-            border.color: Theme.workspaceBorder
-            border.width: Theme.borderThin
-
-            ColumnLayout {
-                anchors.fill: parent
-                anchors.margins: Theme.mainAreaPadding
-                spacing: Theme.rightPaneGap
-
-                // ===== Active Tab Content Area =====
-                Rectangle {
-                    Layout.fillWidth: true
-                    Layout.fillHeight: true
-                    Layout.minimumHeight: 220
-                    color: Theme.responseBackground
-                    border.color: Theme.responseBorder
-                    border.width: 1
-                    radius: Theme.radiusMd
 
             StackLayout {
                 anchors.fill: parent
+                anchors.margins: Theme.mainAreaPadding
                 currentIndex: root.selectedTabIndex
 
-                        // ===== Tab Content Routing =====
-                        Repeater {
-                            model: root.bottomTabs
-
-                            Item {
-                                property string tabName: modelData
-
                 Loader {
-                                    anchors.fill: parent
+                    source: "Tabs/StatusTab.qml"
-                                    active: parent.tabName === "Settings"
+                    active: StackLayout.index === root.selectedTabIndex
-                                    source: parent.tabName === "Settings" ? "Tabs/SettingsTab.qml" : ""
                 }
-
                 Loader {
-                                    anchors.fill: parent
+                    id: dataTabLoader
-                                    active: parent.tabName === "Status"
+                    source: "Tabs/DataTab.qml"
-                                    source: parent.tabName === "Status" ? "Tabs/StatusTab.qml" : ""
+                    active: StackLayout.index === root.selectedTabIndex
                 }
-
                 Loader {
-                                    anchors.fill: parent
+                    source: "Tabs/WaferMapTab.qml"
-                                    active: parent.tabName === "Data"
+                    // TODO P3.1: append `&& licenseModel.licenses.length > 0`
-                                    source: parent.tabName === "Data" ? "Tabs/DataTab.qml" : ""
+                    //   so the tab never instantiates while locked. See plan §3.1.
+                    active: StackLayout.index === root.selectedTabIndex
                 }
-
-                                Label {
-                                    anchors.centerIn: parent
-                                    visible: parent.tabName !== "Settings" && parent.tabName !== "Status" && parent.tabName !== "Data" && parent.tabName !== "Wafer Map" && parent.tabName !== "Graph"
-                                    text: parent.tabName + " content"
-                                    color: Theme.bodyColor
-                                    font.pixelSize: 20
-                                }
-
                 Loader {
-                                    anchors.fill: parent
+                    source: "Tabs/GraphTab.qml"
-                                    active: parent.tabName === "Wafer Map"
+                    active: StackLayout.index === root.selectedTabIndex
-                                    source: parent.tabName === "Wafer Map" ? "Tabs/WaferMapTab.qml" : ""
-                                }
-
-                                Loader {
-                                    anchors.fill: parent
-                                    active: parent.tabName === "Graph"
-                                    source: parent.tabName === "Graph" ? "Tabs/GraphTab.qml" : ""
-                                }
-                            }
-                        }
-                    }
-                }
-
-                // Keep the tab strip evenly distributed across the footer.
-                // ===== Footer Tab Strip =====
-                Rectangle {
-                    Layout.fillWidth: true
-                    Layout.preferredHeight: Theme.tabBarHeight + (Theme.tabBarPadding * 2)
-                    color: Theme.tabBarBackground
-                    border.color: Theme.workspaceBorder
-                    border.width: Theme.borderThin
-                    radius: Theme.radiusMd
-
-                    RowLayout {
-                        anchors.fill: parent
-                        anchors.margins: Theme.tabBarPadding
-                        spacing: Theme.tabSpacing
-
-                        Repeater {
-                            model: root.bottomTabs
-
-                            Button {
-                                id: botTabBtn
-                                property bool isActive: index === root.selectedTabIndex
-
-                                text: modelData
-                                Layout.fillWidth: true
-                                Layout.preferredHeight: Theme.tabBarHeight
-                                Layout.minimumWidth: Theme.tabButtonMinWidth
-                                onClicked: root.selectedTabIndex = index
-                                hoverEnabled: true
-
-                                background: Rectangle {
-                                    color: botTabBtn.isActive ? Theme.tabActiveBackground : (botTabBtn.hovered ? Theme.tabHoverBackground : Theme.tabBackground)
-                                    border.color: Theme.tabBorder
-                                    border.width: 1
-                                    radius: Theme.tabRadius
-                                }
-
-                                contentItem: Text {
-                                    text: botTabBtn.text
-                                    color: botTabBtn.isActive ? Theme.tabActiveText : Theme.tabText
-                                    font.pixelSize: Theme.tabFontSize
-                                    font.bold: botTabBtn.isActive
-                                    horizontalAlignment: Text.AlignHCenter
-                                    verticalAlignment: Text.AlignVCenter
-                                    elide: Text.ElideRight
-                                }
-                            }
-                        }
-                    }
                 }
             }
         }

src/pygui/ISC/Tabs/DataTab.qml

@@ -1,175 +1,373 @@
 import QtQuick
 import QtQuick.Controls
+import QtQuick.Controls.impl
 import QtQuick.Layouts
-import QtQuick.TableView
 import ISC
+import ISC.Tabs.components
+import ISC.Wafer
 
-// ===== Data Tab =====
+// ===== Data Tab (Compare Content Only) =====
-// Displays parsed temperature data in a scrollable table.
+// Per docs/design/navigation-mock.html: the Data tab shows only the Compare
-// Column 0 = Row index, remaining columns = Sensor1, Sensor2, ...
+// Runs content — the raw CSV table ("Inspect Table" mode in earlier drafts)
+// is intentionally not displayed in the application.
+// Layout: left column = aligned-curves chart with alignment scrubber + wafer
+// overlap map; right side panel = run selection dropdowns, overlap settings,
+// and DTW readout cards.
 Item {
     id: root
     anchors.fill: parent
 
-    readonly property int rowCount: deviceController.dataRowCount
+    // Properties for DTW Comparison
+    property int activeBox: 1 // 1 for Reference (Run A), 2 for Session (Run B), 0 for inactive
+    property string compareFileA: ""
+    property string compareFileB: ""
+    property bool useMasterFile: false // Run A comes from settingsModel.masters[runBWaferType] instead of manual selection
 
-    // Re-layout columns whenever the model is reset
+    function waferTypeForFile(path) {
+        if (!path) return ""
+        // A file registered as a master carries that slot's family — this is
+        // the only way a live recording gets a family (its filename/metadata
+        // don't encode one reliably).
+        for (var fam in settingsModel.masters)
+            if (settingsModel.masters[fam] === path) return fam.toUpperCase()
+        var rows = file_browser.files
+        for (var i = 0; i < rows.length; i++) {
+            if (rows[i].fileName === path) {
+                if (rows[i].isRecording) return (rows[i].masterType || "").toUpperCase()
+                return (rows[i].waferType || "").toUpperCase()
+            }
+        }
+        var base = path.split("/").pop()
+        if (base.toLowerCase().indexOf("live_") === 0) return ""
+        return base ? base.charAt(0).toUpperCase() : ""
+    }
+
+    // Master file must match Run B's wafer family — looking it up by that
+    // family is itself the comparability gate (a mismatched-family master
+    // simply won't exist under this key).
+    readonly property string runBWaferType: root.waferTypeForFile(root.compareFileB)
+    readonly property string masterFileForRunB: root.runBWaferType !== "" ? (settingsModel.masters[root.runBWaferType] || "") : ""
+    readonly property string runAWaferType: root.useMasterFile ? root.runBWaferType : root.waferTypeForFile(root.compareFileA)
+    // Family gate: both runs must resolve to the same wafer family. An empty
+    // family means an unassigned live recording — comparable only after it is
+    // registered as a master file (Settings → Master Files).
+    readonly property string familyGateError: {
+        var fileA = root.useMasterFile ? root.masterFileForRunB : root.compareFileA
+        if (fileA === "" || root.compareFileB === "") return ""
+        if (root.runAWaferType === "" || root.runBWaferType === "")
+            return "Recording has no wafer family — register it as a master file (Settings → Master Files)"
+        if (root.runAWaferType !== root.runBWaferType)
+            return "Wafer Family Mismatch: " + root.runAWaferType + " vs " + root.runBWaferType
+        return ""
+    }
+    property real warpingDistance: -1
+    property int frameOffset: 0
+    property real frameOffsetSeconds: 0
+    property real maxSensorDeviation: -1
+    property bool comparing: false
+    property var trendDataA: []
+    property var trendDataB: []
+    property var timeDataA: []
+    property var timeDataB: []
+    property int frameCountA: 0
+    property int frameCountB: 0
+    property string errorMessage: ""
+    property string mismatchMessage: ""
+
+    // Wafer overlap properties
+    property var compareSensorLayout: []
+    property var compareSensorDiff: []
+    property string compareWaferShape: "round"
+    property real compareWaferSize: 300.0
+
+    readonly property bool hasSeries: trendDataA.length > 1 && trendDataB.length > 1
+    readonly property int seriesLen: Math.max(trendDataA.length, trendDataB.length)
+
+    function diffBands(diffs) {
+        return diffs.map(d => d > 1.0 ? "high" : d < -1.0 ? "low" : "in_range")
+    }
+
+    function shortName(path) {
+        return path ? path.split("/").pop() : ""
+    }
+
+    function scrubTimeLabel(idx) {
+        var t = idx < root.timeDataA.length ? root.timeDataA[idx]
+            : (idx < root.timeDataB.length ? root.timeDataB[idx] : null)
+        return t !== null ? " (" + t.toFixed(1) + "s)" : ""
+    }
+
+    function formatMinutes(secondsValue) {
+        var mins = Math.floor(secondsValue / 60)
+        var secs = secondsValue % 60
+        return mins + ":" + (secs < 10 ? "0" : "") + secs.toFixed(1)
+    }
+
+    function frameForTime(t) {
+        var times = root.timeDataA.length > 0 ? root.timeDataA : root.timeDataB
+        if (times.length === 0) return 0
+        var closestIdx = 0
+        var minDiff = Math.abs(times[0] - t)
+        for (var i = 1; i < times.length; i++) {
+            var diff = Math.abs(times[i] - t)
+            if (diff < minDiff) {
+                minDiff = diff
+                closestIdx = i
+            }
+        }
+        return closestIdx
+    }
+
+    function clearResults() {
+        root.warpingDistance = -1
+        root.frameOffset = 0
+        root.frameOffsetSeconds = 0
+        root.maxSensorDeviation = -1
+        root.trendDataA = []
+        root.trendDataB = []
+        root.timeDataA = []
+        root.timeDataB = []
+        root.frameCountA = 0
+        root.frameCountB = 0
+        root.compareSensorLayout = []
+        root.compareSensorDiff = []
+        root.errorMessage = ""
+        root.mismatchMessage = ""
+        mismatchHideTimer.stop()
+    }
+
+    function resetComparison() {
+        root.compareFileA = ""
+        root.compareFileB = ""
+        root.useMasterFile = false
+        root.comparing = false
+        root.activeBox = 1
+        clearResults()
+    }
+
+    Component.onCompleted: file_browser.refreshFiles()
+
+    Timer {
+        id: mismatchHideTimer
+        interval: 6000
+        onTriggered: root.mismatchMessage = ""
+    }
+
+    // Clicking a file in the left rail's browser populates the armed run slot
     Connections {
-        target: deviceController
+        target: streamController
-        function onParsedDataReady(result) {
+        function onLoadedFileChanged() {
+            if (streamController.loadedFile && root.activeBox > 0) {
+                if (root.activeBox === 1) {
+                    root.compareFileA = streamController.loadedFile
+                    root.activeBox = 2 // Auto-advance to box 2
+                } else if (root.activeBox === 2) {
+                    root.compareFileB = streamController.loadedFile
+                    root.activeBox = 0 // Finished selecting
+                }
+            }
+        }
+        function onComparisonResult(result) {
+            root.comparing = false
             if (result && result.success) {
-                dataTable.forceLayout()
+                root.warpingDistance = result.distance
+                root.frameOffset = result.frame_offset !== undefined ? result.frame_offset : 0
+                root.frameOffsetSeconds = result.frame_offset_seconds !== undefined ? result.frame_offset_seconds : 0
+                root.maxSensorDeviation = result.max_sensor_deviation !== undefined ? result.max_sensor_deviation : -1
+                root.trendDataA = result.series_a || []
+                root.trendDataB = result.series_b || []
+                root.timeDataA = result.time_a || []
+                root.timeDataB = result.time_b || []
+                root.frameCountA = result.frame_count_a || 0
+                root.frameCountB = result.frame_count_b || 0
+                root.compareSensorLayout = result.sensor_layout || []
+                root.compareSensorDiff = result.sensor_diff || []
+                root.compareWaferShape = result.wafer_shape || "round"
+                root.compareWaferSize = result.wafer_size || 300.0
+                root.errorMessage = ""
+                chartCard.frameIndex = Math.floor(root.seriesLen / 2)
+                chartCard.focusScrubber()
+                if (root.frameCountA !== root.frameCountB) {
+                    var timeA = root.timeDataA.length > 0 ? root.timeDataA[root.timeDataA.length - 1] : 0
+                    var timeB = root.timeDataB.length > 0 ? root.timeDataB[root.timeDataB.length - 1] : 0
+                    root.mismatchMessage = "Run A: " + root.frameCountA + " frames (" + timeA.toFixed(1) + "s) · "
+                        + "Run B: " + root.frameCountB + " frames (" + timeB.toFixed(1) + "s). "
+                        + "Deviation beyond the shorter run shows as \"none\"."
+                    mismatchHideTimer.restart()
+                } else {
+                    root.mismatchMessage = ""
+                    mismatchHideTimer.stop()
+                }
+            } else {
+                root.clearResults()
+                root.errorMessage = (result && result.error) ? result.error : "Comparison failed"
             }
         }
     }
 
-    // ===== Empty State =====
+    // ── Main Layout ───────────────────────────────────────────────
-    Column {
-        anchors.centerIn: parent
-        spacing: 16
-        visible: root.rowCount === 0
-
-        Label {
-            text: "No Data"
-            font.pixelSize: 24
-            font.bold: true
-            color: Theme.headingColor
-            anchors.horizontalCenter: parent.horizontalCenter
-        }
-
-        Label {
-            text: "Read and parse wafer data to see temperature readings here."
-            font.pixelSize: 14
-            color: Theme.bodyColor
-            anchors.horizontalCenter: parent.horizontalCenter
-            wrapMode: Text.WordWrap
-        }
-    }
-
-    // ===== Data Table =====
     ColumnLayout {
         anchors.fill: parent
         anchors.margins: Theme.panelPadding
         spacing: Theme.rightPaneGap
-        visible: root.rowCount > 0
 
-        // --- Header row ---
-        RowLayout {
-            Layout.fillWidth: true
-            spacing: Theme.rightPaneGap
 
-            Label {
-                text: "Temperature Data"
-                font.pixelSize: 18
-                font.bold: true
-                color: Theme.headingColor
-            }
 
-            Item { Layout.fillWidth: true }
+        // ── Error Banner ───────────────────────────────────────────
-
-            Label {
-                text: deviceController.dataRowCount + " rows × " +
-                      deviceController.dataColCount + " sensors"
-                font.pixelSize: 13
-                color: Theme.bodyColor
-            }
-        }
-
-        // --- Toolbar ---
-        RowLayout {
-            Layout.fillWidth: true
-            spacing: 8
-
-            Button {
-                text: "Open in Excel"
-                icon.source: "icon/excel.svg"
-                onClicked: deviceController.openCsvFile()
-            }
-
-            Button {
-                text: "Compare"
-                onClicked: compareDialog.open()
-            }
-
-            Button {
-                text: "Split"
-                onClicked: splitDialog.open()
-            }
-
-            Item { Layout.fillWidth: true}
-        }
-        // --- Table container ---
         Rectangle {
             Layout.fillWidth: true
-            Layout.fillHeight: true
+            Layout.preferredHeight: errorRow.implicitHeight + 16
-            color: Theme.panelBackground
+            visible: root.errorMessage !== ""
-            border.color: Theme.cardBorder
+            color: Theme.errorSurface
-            border.width: Theme.borderThin
+            border.color: Theme.statusErrorColor
-            radius: Theme.radiusSm
-            clip: true
-
-            ColumnLayout {
-                anchors.fill: parent
-                anchors.margins: 1
-                spacing: 0
-
-                // Column header strip
-                HorizontalHeaderView {
-                    id: headerView
-                    Layout.fillWidth: true
-                    syncView: dataTable
-                    clip: true
-
-                    delegate: Rectangle {
-                        implicitHeight: 28
-                        color: Theme.cardBackground
-                        border.color: Theme.cardBorder
             border.width: 1
+            radius: Theme.radiusSm
 
-                        Text {
+            RowLayout {
-                            anchors.centerIn: parent
+                id: errorRow
-                            // 'display' is the Qt.DisplayRole value from headerData()
+                anchors.fill: parent
-                            text: display !== undefined ? display : ""
+                anchors.margins: 8
-                            color: Theme.headingColor
+                spacing: 8
-                            font.pixelSize: 11
+
-                            font.bold: true
+                IconImage {
-                            elide: Text.ElideRight
+                    source: "icons/triangle-alert.svg"
+                    width: 16; height: 16
+                    sourceSize.width: 16
+                    sourceSize.height: 16
+                    color: Theme.errorTextSoft
+                    Layout.alignment: Qt.AlignTop
+                }
+
+                Label {
+                    id: errorLabel
+                    text: root.errorMessage
+                    color: Theme.errorTextSoft
+                    font.pixelSize: Theme.fontSm
+                    wrapMode: Text.WordWrap
+                    Layout.fillWidth: true
                 }
             }
         }
 
-                // Data rows
+        // ── Body: main column | side panel ─────────────────────────
-                TableView {
+        RowLayout {
-                    id: dataTable
             Layout.fillWidth: true
             Layout.fillHeight: true
-                    model: deviceController.dataModel
+            spacing: 16
-                    clip: true
-                    reuseItems: true
 
-                    columnWidthProvider: function(col) {
+            // --- Left Column: chart + scrubber, wafer overlap map ---
-                        if (col === 0) return 52   // row index column
+            ColumnLayout {
-                        const sensorCols = Math.max(1, dataTable.columns - 1)
+                Layout.fillWidth: true
-                        const available  = dataTable.width - 52
+                Layout.fillHeight: true
-                        return Math.max(52, Math.min(90, available / sensorCols))
+                Layout.minimumWidth: 350
+                spacing: 12
+
+                // Wafer Map Overlap View card
+                OverlapMapCard {
+                    Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    Layout.minimumHeight: 220
+                    sensorLayout: root.compareSensorLayout
+                    diffValues: streamController.getSensorDiffAt(Math.round(chartCard.frameIndex))
+                    diffBands: root.diffBands
+                    waferShape: root.compareWaferShape
+                    waferSize: root.compareWaferSize
+                    overlapEnabled: sidePanel.overlapEnabled
+                    blendAmount: sidePanel.blendAmount
                 }
 
-                    rowHeightProvider: function() { return 24 }
+                // Chart card with alignment scrubber
-
+                ComparisonChartCard {
-                    delegate: Rectangle {
+                    id: chartCard
-                        color: row % 2 === 0 ? Theme.panelBackground : Theme.cardBackground
+                    Layout.fillWidth: true
-
+                    trendDataA: root.trendDataA
-                        Text {
+                    trendDataB: root.trendDataB
-                            anchors.centerIn: parent
+                    seriesLen: root.seriesLen
-                            text: display !== undefined ? display : ""
+                    hasSeries: root.hasSeries
-                            color: Theme.bodyColor
+                    comparing: root.comparing
-                            font.pixelSize: 11
-                            elide: Text.ElideRight
                 }
 }
 
-                    ScrollBar.horizontal: ScrollBar { policy: ScrollBar.AsNeeded }
+            // --- Right Column: run selection, overlap settings, readout ---
-                    ScrollBar.vertical:   ScrollBar { policy: ScrollBar.AsNeeded }
+            ComparisonSidePanel {
+                id: sidePanel
+                Layout.fillWidth: false                
+                Layout.preferredWidth: Theme.rightRailWidth
+                Layout.minimumWidth: Theme.rightRailWidth
+                Layout.maximumWidth: Theme.rightRailWidth
+                Layout.fillHeight: true
+                warpingDistance: root.warpingDistance
+                frameOffset: root.frameOffset
+                frameOffsetSeconds: root.frameOffsetSeconds
+                maxSensorDeviation: root.maxSensorDeviation
+                seriesLen: root.seriesLen
+                hasSeries: root.hasSeries
+                trendDataA: root.trendDataA
+                trendDataB: root.trendDataB
+                timeDataA: root.timeDataA
+                timeDataB: root.timeDataB
+                frameForTime: root.frameForTime
+                frameIndex: chartCard.frameIndex
+                onFrameIndexRequested: (idx) => chartCard.frameIndex = idx
+                onScrubberFocusRequested: chartCard.focusScrubber()
+            }
+        }
+    }
+
+    // ── Frame Mismatch Banner (amber, floats over content, auto-hides) ──
+    Rectangle {
+        id: mismatchBanner
+        visible: root.mismatchMessage !== ""
+        z: 100
+        anchors.top: parent.top
+        anchors.horizontalCenter: parent.horizontalCenter
+        anchors.topMargin: 12
+        width: Math.min(parent.width - 48, 640)
+        height: mismatchRow.implicitHeight + 16
+        color: Theme.cardBackground
+        border.color: Theme.statusWarningColor
+        border.width: 1
+        radius: Theme.radiusSm
+
+        RowLayout {
+            id: mismatchRow
+            anchors.fill: parent
+            anchors.margins: 8
+            spacing: 8
+
+            IconImage {
+                source: "icons/triangle-alert.svg"
+                width: 16; height: 16
+                sourceSize.width: 16
+                sourceSize.height: 16
+                color: Theme.statusWarningColor
+                Layout.alignment: Qt.AlignTop
+            }
+
+            Label {
+                text: root.mismatchMessage
+                color: Theme.statusWarningColor
+                font.pixelSize: Theme.fontSm
+                wrapMode: Text.WordWrap
+                Layout.fillWidth: true
+            }
+
+            Button {
+                flat: true
+                implicitWidth: 24
+                implicitHeight: 24
+                Layout.alignment: Qt.AlignTop
+                onClicked: {
+                    root.mismatchMessage = ""
+                    mismatchHideTimer.stop()
+                }
+                background: Rectangle { color: "transparent" }
+                contentItem: Label {
+                    text: "✕"
+                    color: Theme.statusWarningColor
+                    font.pixelSize: Theme.fontXs
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
                 }
             }
         }

src/pygui/ISC/Tabs/GraphTab.qml

@@ -1,219 +1,49 @@
 import QtQuick
-import QtQuick.Controls
 import QtQuick.Layouts
 import ISC
-import ISC.Wafer
+import ISC.Tabs.components
 
 // ===== Graph Tab =====
-// Displays sensor temperature line charts using GraphQuickItem.
+// Whole-run multi-sensor line chart (C# parity: tabGraph/chartData). Static
-// Gets data from deviceController.getChartData() (parsed CSV, batch read)
+// snapshot recomputed whenever a file is loaded — not live-updating during
-// or from streamController.trendData (live streaming trend).
+// a stream. RunChart adds wheel zoom, drag pan, and a visible-range
+// min/max/avg strip. See specs/plans/2026-07-10-graph-tab.md and
+// docs/adr/0003-pyqtgraph-for-multi-sensor-charts.md.
 Item {
     id: root
     anchors.fill: parent
 
-    property var _chartData: null   // cached result from getChartData()
+    function refresh() {
-
+        if (!streamController.loadedFile) {
-    ColumnLayout {
+            chart.seriesData = []
-        anchors.fill: parent
+            chart.sensorNames = []
-        anchors.margins: Theme.panelPadding
-        spacing: Theme.rightPaneGap
-
-        // ── Toolbar ───────────────────────────────────────────────────────────
-        RowLayout {
-            Layout.fillWidth: true
-            spacing: 10
-
-            Label {
-                text: "Line Chart"
-                color: Theme.headingColor
-                font.pixelSize: 13
-                font.bold: true
-                Layout.alignment: Qt.AlignVCenter
-            }
-
-            Item { Layout.fillWidth: true }
-
-            // Refresh button — pulls data from deviceController
-            Button {
-                id: refreshBtn
-                text: "REFRESH"
-                font.pixelSize: 10
-                font.weight: Font.Medium
-                implicitHeight: 26
-                implicitWidth: 72
-                hoverEnabled: true
-                background: Rectangle {
-                    color: parent.hovered ? Theme.buttonNeutralHover : Theme.buttonNeutralBackground
-                    border.color: Theme.cardBorder
-                    border.width: 1
-                    radius: Theme.radiusSm
-                }
-                contentItem: Text {
-                    text: parent.text
-                    color: Theme.headingColor
-                    font: parent.font
-                    horizontalAlignment: Text.AlignHCenter
-                    verticalAlignment: Text.AlignVCenter
-                }
-                onClicked: reloadData()
-            }
-        }
-
-        // ── Mode selector (Trend / Full chart) ─────────────────────────────
-        RowLayout {
-            Layout.fillWidth: true
-            spacing: 8
-
-            Label {
-                text: "Source:"
-                color: Theme.bodyColor
-                font.pixelSize: 10
-                Layout.alignment: Qt.AlignVCenter
-            }
-
-            ComboBox {
-                id: sourceSelector
-                model: ["Parsed Data", "Live Trend"]
-                currentIndex: 0
-                implicitHeight: 26
-                font.pixelSize: 11
-                background: Rectangle {
-                    color: Theme.fieldBackground
-                    border.color: Theme.fieldBorder
-                    border.width: 1
-                    radius: Theme.radiusSm
-                }
-                contentItem: Text {
-                    text: sourceSelector.displayText
-                    color: Theme.fieldText
-                    font: sourceSelector.font
-                    horizontalAlignment: Text.AlignLeft
-                    verticalAlignment: Text.AlignVCenter
-                    leftPadding: 8
-                }
-                onCurrentIndexChanged: reloadData()
-            }
-
-            Item { Layout.fillWidth: true }
-
-            Label {
-                id: statusLabel
-                text: "Ready"
-                color: Theme.bodyColor
-                font.pixelSize: 10
-                font.italic: true
-                Layout.alignment: Qt.AlignVCenter
-            }
-        }
-
-        // ── Chart Area ─────────────────────────────────────────────────────────
-        Rectangle {
-            Layout.fillWidth: true
-            Layout.fillHeight: true
-            color: Theme.cardBackground
-            border.color: Theme.cardBorder
-            border.width: 1
-            radius: Theme.radiusMd
-            clip: true
-
-            GraphQuickItem {
-                id: graph
-                anchors.fill: parent
-                anchors.margins: 2
-                backgroundColor: Theme.cardBackground
-                gridColor: Theme.softBorder
-                axisColor: Theme.bodyColor
-                textColor: Theme.headingColor
-                seriesColors: [Theme.sensorLow, Theme.sensorHigh, Theme.sensorInRange,
-                               "#FFA726", "#AB47BC", "#00BCD4"]
-                showLegend: true
-            }
-        }
-    }
-
-    // ── Data Loading ────────────────────────────────────────────────────────────
-
-    function reloadData() {
-        if (sourceSelector.currentIndex === 0) {
-            // Parsed data from DeviceController
-            loadParsedData()
-        } else {
-            // Live trend from SessionController
-            loadLiveTrend()
-        }
-    }
-
-    function loadParsedData() {
-        statusLabel.text = "Loading..."
-        var result = deviceController.getChartData()
-        if (!result || !result.success) {
-            graph.seriesData = []
-            graph.sensorNames = []
-            graph.title = "Sensor Temperature Over Time"
-            statusLabel.text = "No data — read a wafer first"
             return
         }
-
+        chart.sensorNames = streamController.graphSensorNames
-        graph.seriesData = result.series || []
+            ? streamController.graphSensorNames.split(",") : []
-        graph.sensorNames = result.sensor_names || []
+        chart.seriesData = JSON.parse(streamController.graphSeriesJson || "[]")
-        graph.title = "Sensor Temperature Over Time"
-        statusLabel.text = (result.series ? result.series.length : 0) + " sensors loaded"
-    }
-
-    function loadLiveTrend() {
-        // Live trend: connects to streamController.trendData
-        // The trend data comes as a JSON array of per-frame averages
-        statusLabel.text = "Connecting to live trend..."
-        // We need at least one data point
-        if (streamController.stats && streamController.stats.avg !== undefined) {
-            // Build a single-series graph from the trend buffer
-            // For now show a placeholder — the trendData signal handles updates
-            graph.title = "Live Average Temperature"
-            graph.yLabel = "Avg Temperature (°C)"
-            graph.xLabel = "Time (s)"
-            statusLabel.text = "Live trend — waiting for data..."
-        } else {
-            statusLabel.text = "No live data — start a stream on the Wafer Map tab"
-        }
-    }
-
-    // ── Connections ─────────────────────────────────────────────────────────────
-
-    Connections {
-        target: deviceController
-        function onParsedDataReady(result) {
-            if (sourceSelector.currentIndex === 0) {
-                root.reloadData()
-            }
-        }
     }
 
     Connections {
         target: streamController
-        function onTrendData(avgsJson) {
+        function onLoadedFileChanged() { root.refresh() }
-            if (sourceSelector.currentIndex === 1) {
-                try {
-                    var avgs = JSON.parse(avgsJson)
-                    if (avgs && avgs.length > 0) {
-                        graph.seriesData = [avgs]
-                        graph.sensorNames = ["Average"]
-                        graph.title = "Live Average Temperature"
-                        graph.yLabel = "Avg Temperature (°C)"
-                        graph.xLabel = "Frame"
-                        statusLabel.text = "Live: " + avgs.length + " data points"
-                    }
-                } catch (e) {
-                    // ignore parse errors
-                }
-            }
-        }
     }
 
-    // On startup, try to load parsed data if available
+    Component.onCompleted: root.refresh()
-    Component.onCompleted: {
+
-        if (deviceController.dataRowCount > 0) {
+    Rectangle {
-            reloadData()
+        anchors.fill: parent
+        anchors.margins: Theme.panelPadding
+        color: Theme.cardBackground
+        border.color: Theme.cardBorder
+        border.width: 1
+        radius: Theme.radiusMd
+
+        RunChart {
+            id: chart
+            anchors.fill: parent
+            anchors.margins: 8
+            title: "Sensor Temperature Over Time"
         }
     }
 }

src/pygui/ISC/Tabs/SettingsTab.qml

@@ -1,8 +1,10 @@
 import QtQuick
 import QtQuick.Controls
+import QtQuick.Controls.impl
 import QtQuick.Layouts
 import QtQuick.Dialogs
 import ISC
+import ISC.Tabs.components
 
 Item {
     id: root
@@ -27,8 +29,7 @@ Item {
     }
 
     // ===== Settings Data Helpers =====
-    readonly property var masterFamilies: ["A", "B", "C", "D", "E", "F", "P", "X", "Z"]
+    // ListModel for master families defined inline in the ColumnLayout below
-
     function masterPath(family) {
         const table = settingsModel.masters;
         return table && table[family] ? table[family] : "";
@@ -58,7 +59,7 @@ Item {
         label: Label {
             text: settingsGroup.title
             color: Theme.panelTitleText
-            font.pixelSize: 16
+            font.pixelSize: Theme.fontLg
             font.bold: true
         }
     }
@@ -75,6 +76,12 @@ Item {
             color: Theme.fieldBackground
             border.width: textInput.activeFocus ? Theme.borderStrong : Theme.borderThin
             border.color: textInput.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+            Behavior on color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
+            Behavior on border.color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
         }
     }
 
@@ -111,16 +118,24 @@ Item {
             border.width: Theme.borderThin
             border.color: toggle.checked ? Theme.primaryAccent : Theme.fieldBorder
 
-            Text {
+            Behavior on color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
+            Behavior on border.color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
+
+            IconImage {
                 anchors.centerIn: parent
-                text: "✓"
+                source: "icons/check.svg"
-                font.pixelSize: 14
+                width: 12; height: 12
-                font.bold: true
+                sourceSize.width: 12
+                sourceSize.height: 12
                 color: Theme.panelBackground
-                visible: toggle.checked
+                opacity: toggle.checked ? 1.0 : 0.0
-                // Small nudge to center the checkmark perfectly
+                Behavior on opacity {
-                verticalAlignment: Text.AlignVCenter
+                    NumberAnimation { duration: Theme.durationFast }
-                horizontalAlignment: Text.AlignHCenter
+                }
             }
         }
 
@@ -129,7 +144,7 @@ Item {
             color: Theme.headingColor
             verticalAlignment: Text.AlignVCenter
             leftPadding: toggle.indicator.width + toggle.spacing
-            font.pixelSize: 13
+            font.pixelSize: Theme.fontSm
         }
     }
 
@@ -159,6 +174,7 @@ Item {
                 anchors.top: settingsScroll.top
                 anchors.right: settingsScroll.right
                 anchors.bottom: settingsScroll.bottom
+                anchors.leftMargin: 6
                 policy: ScrollBar.AsNeeded
 
                 contentItem: Rectangle {
@@ -174,16 +190,19 @@ Item {
                 }
             }
 
+            // Gap reserved between the centered content and the right-edge scrollbar.
+            readonly property int scrollGap: 100
+
             ColumnLayout {
                 id: container
-                width: Math.min(settingsScroll.availableWidth, Theme.settingsPanelMaxWidth)
+                width: Math.min(settingsScroll.availableWidth - settingsScroll.scrollGap, Theme.settingsPanelMaxWidth)
                 x: (settingsScroll.availableWidth - width) / 2
                 spacing: Theme.settingsSectionSpacing
 
                 // ===== Page Title =====
                 Label {
                     text: "Settings"
-                    font.pixelSize: 30
+                    font.pixelSize: Theme.font3xl
                     font.bold: true
                     color: Theme.headingColor
                 }
@@ -241,11 +260,24 @@ Item {
                         anchors.fill: parent
                         spacing: Theme.settingsGridSpacing
 
+                        ListModel {
+                            id: masterModel
+                            ListElement { letter: "A" }
+                            ListElement { letter: "B" }
+                            ListElement { letter: "C" }
+                            ListElement { letter: "D" }
+                            ListElement { letter: "E" }
+                            ListElement { letter: "F" }
+                            ListElement { letter: "P" }
+                            ListElement { letter: "X" }
+                            ListElement { letter: "Z" }
+                        }
+
                         Repeater {
-                            model: root.masterFamilies
+                            model: masterModel
 
                             RowLayout {
-                                property string family: modelData
+                                property string family: model.letter
 
                                 Layout.fillWidth: true
                                 spacing: Theme.settingsRowSpacing
@@ -334,7 +366,7 @@ Item {
                                 width: 22
                                 height: 22
                                 radius: height / 2
-                                color: "white"
+                                color: Theme.toggleThumb
                                 anchors.verticalCenter: parent.verticalCenter
                                 x: Theme.isDarkMode ? parent.width - width - 3 : 3
 
@@ -361,7 +393,7 @@ Item {
                         Label {
                             text: Theme.isDarkMode ? "Dark" : "Light"
                             color: Theme.bodyColor
-                            font.pixelSize: 13
+                            font.pixelSize: Theme.fontSm
                             Layout.alignment: Qt.AlignVCenter
 
                             Behavior on color {
@@ -420,12 +452,9 @@ Item {
                 }
             }
 
-            Label {
+            Row {
                 anchors.centerIn: parent
-                text: "↓ Scroll for more"
+                spacing: 4
-                font.pixelSize: 13
-                font.bold: true
-                color: Theme.bodyColor
                 opacity: (settingsScroll.ScrollBar.vertical.position <= 0 && settingsScroll.contentHeight > settingsScroll.height) ? (scrollHintTimer.running ? 1 : 0) : 0
 
                 Behavior on opacity {
@@ -433,6 +462,22 @@ Item {
                         duration: 400
                     }
                 }
+
+                IconImage {
+                    anchors.verticalCenter: parent.verticalCenter
+                    source: "icons/chevron-down.svg"
+                    width: 14; height: 14
+                    sourceSize.width: 14
+                    sourceSize.height: 14
+                    color: Theme.bodyColor
+                }
+                Label {
+                    anchors.verticalCenter: parent.verticalCenter
+                    text: "Scroll for more"
+                    font.pixelSize: Theme.fontSm
+                    font.bold: true
+                    color: Theme.bodyColor
+                }
             }
         }
     }

src/pygui/ISC/Tabs/StatusTab.qml

@@ -1,68 +1,306 @@
 import QtQuick
 import QtQuick.Layouts
 import QtQuick.Controls
+import QtQuick.Controls.impl
 import QtQuick.Dialogs
 import ISC
 
-// ===== Status Tab =====
+// ===== Status Tab — Bento Grid Dashboard =====
-// Shows connection status, wafer info, and activity log.
+// ROW 1: Connection Status (65%) | Cycles Completed (35%)
-// Initially visible — displays connection status and activity log from start.
+// ROW 2: Wafer & Sensor + Directory (65%) | Total Runtime (35%)
+// ROW 3: Activity Log (100%, fills remaining)
 ColumnLayout {
     id: root
     anchors.fill: parent
     anchors.margins: Theme.panelPadding
-    spacing: Theme.rightPaneGap
+    spacing: 8
 
-    property alias waferFamilyCode: waferInfoFamily.text
+    // ── Reusable Inline Components ──
-    property alias waferSerialNumber: waferSerial.text
+    component StatCard : Rectangle {
-    property alias waferSensorCount: waferSensors.text
+        property alias value: valueText.text
-    property alias waferRuntime: waferRuntime.text
+        property alias label: labelText.text
-    property alias waferCycles: waferCycles.text
+        property bool active: root.waferDetected
-    property bool waferDetected: false
+        property int valSize: active ? Theme.font3xl : Theme.font2xl
+
+        Layout.fillWidth: true
+        Layout.fillHeight: true
+        color: Theme.cardBackground
+        border.color: Theme.cardBorder
+        border.width: 1
+        radius: Theme.radiusSm
+
+        ColumnLayout {
+            anchors.fill: parent
+            anchors.margins: Theme.panelPadding
+            spacing: 4
+            Text {
+                id: labelText
+                color: Theme.sideMutedText
+                font.pixelSize: Theme.fontSm
+                font.bold: true
+                font.letterSpacing: 1.5
+                font.family: Theme.uiFontFamily
+            }
+            Text {
+                id: valueText
+                color: active ? Theme.headingColor : Theme.sideMutedText
+                font.pixelSize: valSize
+                font.weight: Font.Bold
+                font.family: Theme.uiFontFamily
+                Layout.fillHeight: true
+                Layout.fillWidth: true
+                horizontalAlignment: Text.AlignHCenter
+                verticalAlignment: Text.AlignVCenter
+                fontSizeMode: Text.HorizontalFit
+                minimumPixelSize: Theme.fontMd
+            }
+        }
+    }
+
+    // Stacked stat block: small label over big value, centered in its grid
+    // quadrant so the card's height is used instead of leaving dead space.
+    component GridCell : ColumnLayout {
+        property alias label: labelText.text
+        property alias value: valueText.text
+        property bool active: root.waferDetected
+
+        spacing: 2
+        Layout.fillWidth: true
+        Layout.fillHeight: true
+
+        Item { Layout.fillHeight: true }
+        Text {
+            id: labelText
+            color: Theme.sideMutedText
+            font.pixelSize: Theme.fontXs
+            font.family: Theme.uiFontFamily
+            Layout.fillWidth: true
+            elide: Text.ElideRight
+        }
+        Text {
+            id: valueText
+            color: active ? Theme.headingColor : Theme.sideMutedText
+            font.pixelSize: Theme.fontXl
+            font.weight: Font.Bold
+            font.family: Theme.uiFontFamily
+        }
+        Item { Layout.fillHeight: true }
+    }
+
+    // ── Aliases for external wiring ──
+    property alias waferFamilyCode: waferInfoFamilyCell.value
+    property alias waferSerialNumber: waferSerialCell.value
+    property alias waferSensorCount: waferSensorsCell.value
+    property alias waferRuntime: runtimeCard.value
+    property alias waferCycles: waferCyclesCell.value
+    property bool waferDetected: {
+        var info = deviceController.lastWaferInfo;
+        return info && info.length > 0 && info[0] !== "";
+    }
 
-    // Data summary after parse
     property int dataRows: 0
     property int dataCols: 0
     property string csvPath: ""
     property bool dataParsed: false
 
+    readonly property bool isConnected: deviceController.connectionStatus === "Connected"
+    readonly property bool isBusy: deviceController.connectionStatus.endsWith("...")
+    readonly property string portName: deviceController.selectedPort || "—"
+
     function cleanFolderUrl(url) {
-        return decodeURIComponent(String(url).replace(/^file:\/\//, ""))
+        return decodeURIComponent(String(url).replace(/^file:\/\//, ""));
     }
-
     function currentFamilyCode() {
-        var info = deviceController.lastWaferInfo
+        var info = deviceController.lastWaferInfo;
-        return info && info.length > 0 ? (info[0] || "") : ""
+        return info && info.length > 0 ? (info[0] || "") : "";
     }
-
     function parseAndSavePendingRead() {
-        deviceController.parseAndSaveData(root.currentFamilyCode(), deviceController.selectedPort || "")
+        deviceController.parseAndSaveData(root.currentFamilyCode(), deviceController.selectedPort || "");
     }
 
     FolderDialog {
         id: saveDirDialog
         title: "Choose a folder to save."
         onAccepted: {
-            deviceController.setSaveDataDir(root.cleanFolderUrl(selectedFolder))
+            var dir = root.cleanFolderUrl(selectedFolder);
-            root.parseAndSavePendingRead()
+            deviceController.setSaveDataDir(dir);
+            file_browser.setCurrentDirectory(dir);
+            root.parseAndSavePendingRead();
         }
     }
 
+    // Directory-only picker for the DIRECTORY card button — sets the save dir
+    // without kicking off a parse/save of pending read data.
+    FolderDialog {
+        id: dirOnlyDialog
+        title: "Choose a folder to save Data"
+        onAccepted: {
+            var dir = root.cleanFolderUrl(selectedFolder);
+            deviceController.setSaveDataDir(dir);
+            file_browser.setCurrentDirectory(dir);
+        }
+    }
+
+    // Post-read metadata editor (C# parity: EditCSVMetadataDialog after read).
+    // Cancel keeps the CSV, skips the sidecar — matching C# behavior loosely.
+    Dialog {
+        id: editCsvDialog
+        parent: Overlay.overlay
+        modal: true
+        title: "Edit CSV Metadata"
+        width: 460
+        anchors.centerIn: parent
+        standardButtons: Dialog.Save | Dialog.Cancel
+        onAccepted: file_browser.saveMetadata(root.csvPath, metaWafer.text, metaDate.text, metaChamber.text, metaNotes.text, false, "")
+
         ColumnLayout {
+            anchors.fill: parent
+            spacing: 6
+
+            Text {
+                text: root.csvPath.split("/").pop()
+                color: Theme.sideMutedText
+                font.pixelSize: Theme.fontXs
+                elide: Text.ElideMiddle
+                Layout.fillWidth: true
+            }
+            Label { text: "Wafer" }
+            TextField { id: metaWafer; Layout.fillWidth: true }
+            Label { text: "Date" }
+            TextField { id: metaDate; Layout.fillWidth: true }
+            Label { text: "Chamber" }
+            TextField { id: metaChamber; Layout.fillWidth: true }
+            Label { text: "Notes" }
+            TextField { id: metaNotes; Layout.fillWidth: true }
+        }
+    }
+
+    // ═══════════════════════════════════════════════════════════════════════
+    //  ROWS 1-2 (3-column bento):
+    //    [Connection Status] [Total Runtime  ] [Wafer & Sensor]
+    //    [Directory (span 2)                 ] [   (rowspan)  ]
+    // ═══════════════════════════════════════════════════════════════════════
+    GridLayout {
+        Layout.fillWidth: true
+        Layout.preferredHeight: 188
+        Layout.maximumHeight: 188
+        columns: 3
+        rowSpacing: 8
+        columnSpacing: 8
+
+        // ── Connection Status: two cells wide, top-left ──
+        Rectangle {
+            Layout.columnSpan: 2
             Layout.fillWidth: true
             Layout.fillHeight: true
-        spacing: Theme.rightPaneGap
-
-        // --- Connection Status ---
-        Rectangle {
-            Layout.fillWidth: true
-            Layout.preferredHeight: 92
             color: Theme.cardBackground
-            border.color: {
+            border.color: root.isConnected ? Theme.statusSuccessColor : (root.isBusy ? Theme.statusWarningColor : Theme.statusErrorColor)
-                if (deviceController.connectionStatus === "Connected") return Theme.statusSuccessColor
+            border.width: 1
-                if (deviceController.connectionStatus === "Disconnected") return Theme.statusErrorColor
+            radius: Theme.radiusSm
-                return Theme.cardBorder
+
+            ColumnLayout {
+                anchors.fill: parent
+                anchors.margins: Theme.panelPadding
+                spacing: 6
+
+                Text {
+                    text: "CONNECTION STATUS"
+                    color: Theme.sideMutedText
+                    font.pixelSize: Theme.fontSm
+                    font.bold: true
+                    font.letterSpacing: 1.5
+                    font.family: Theme.uiFontFamily
                 }
+
+                Item { Layout.fillHeight: true }
+
+                RowLayout {
+                    Layout.fillWidth: true
+                    spacing: 8
+
+                    Item {
+                        Layout.fillWidth: true
+                        implicitHeight: 22
+
+                        Row {
+                            anchors.centerIn: parent
+                            spacing: 5
+
+                            Repeater {
+                                model: 4
+                                Rectangle {
+                                    width: 4; height: 4; radius: 2
+                                    anchors.verticalCenter: parent.verticalCenter
+                                    color: root.isConnected ? Theme.statusSuccessColor : (root.isBusy ? Theme.statusWarningColor : Theme.sideMutedText)
+                                    opacity: (root.isConnected || root.isBusy) ? 1.0 : 0.3
+
+                                    SequentialAnimation on opacity {
+                                        running: root.isConnected || root.isBusy
+                                        loops: Animation.Infinite
+                                        NumberAnimation { to: 0.3; duration: 1400 }
+                                        NumberAnimation { to: 1.0; duration: 1400 }
+                                    }
+                                }
+                            }
+
+                            Rectangle {
+                                anchors.verticalCenter: parent.verticalCenter
+                                width: statusPillText.implicitWidth + 16
+                                height: 20
+                                radius: 10
+                                color: root.isConnected ? Theme.statusSuccessColor : (root.isBusy ? Theme.statusWarningColor : Theme.statusErrorColor)
+
+                                Text {
+                                    id: statusPillText
+                                    anchors.centerIn: parent
+                                    text: root.isConnected ? "ACTIVE" : (root.isBusy ? deviceController.connectionStatus.replace("...", "").toUpperCase() : "INACTIVE")
+                                    color: Theme.statusBadgeText
+                                    font.pixelSize: Theme.fontXs
+                                    font.weight: Font.Bold
+                                    font.family: Theme.uiFontFamily
+                                    font.letterSpacing: 0.6
+                                }
+                            }
+
+                            Repeater {
+                                model: 4
+                                Rectangle {
+                                    width: 4; height: 4; radius: 2
+                                    anchors.verticalCenter: parent.verticalCenter
+                                    color: root.isConnected ? Theme.statusSuccessColor : (root.isBusy ? Theme.statusWarningColor : Theme.sideMutedText)
+                                    opacity: (root.isConnected || root.isBusy) ? 1.0 : 0.3
+
+                                    SequentialAnimation on opacity {
+                                        running: root.isConnected || root.isBusy
+                                        loops: Animation.Infinite
+                                        NumberAnimation { to: 0.3; duration: 1400 }
+                                        NumberAnimation { to: 1.0; duration: 1400 }
+                                    }
+                                }
+                            }
+                        }
+                    }
+
+                    Text {
+                        text: root.portName
+                        color: root.isConnected ? Theme.statusSuccessColor : Theme.headingColor
+                        font.pixelSize: Theme.fontMd
+                        font.weight: Font.Bold
+                        font.family: Theme.uiFontFamily
+                        elide: Text.ElideMiddle
+                    }
+                }
+            }
+        }
+
+        // ── Wafer & Sensor Data: far right, spans both rows ──
+        Rectangle {
+            Layout.rowSpan: 2
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            color: Theme.cardBackground
+            border.color: Theme.cardBorder
+            border.width: 1
             radius: Theme.radiusSm
 
             ColumnLayout {
@@ -71,164 +309,188 @@ ColumnLayout {
                 spacing: 4
 
                 Text {
-                    text: deviceController.connectionStatus
+                    text: "WAFER & SENSOR DATA"
-                    color: {
+                    color: Theme.sideMutedText
-                        if (deviceController.connectionStatus === "Connected") return Theme.statusSuccessColor
+                    font.pixelSize: Theme.fontSm
-                        if (deviceController.connectionStatus === "Disconnected") return Theme.statusErrorColor
+                    font.weight: Font.Bold
-                        return Theme.bodyColor
+                    font.family: Theme.uiFontFamily
-                    }
+                    font.letterSpacing: 0.6
-                    font.bold: true
+                    Layout.bottomMargin: 2
-                    font.pixelSize: 16
-                    Layout.fillWidth: true
                 }
 
-                Text {
+                GridLayout {
-                    text: "Port: " + (deviceController.selectedPort || "None selected")
-                    color: Theme.bodyColor
-                    font.pixelSize: 14
                     Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    columns: 2
+                    rowSpacing: 6
+                    columnSpacing: 16
+
+                    GridCell {
+                        id: waferInfoFamilyCell
+                        label: "Family Code"
+                        value: {
+                            var info = deviceController.lastWaferInfo;
+                            return (info && info.length > 0 && info[0]) ? info[0] : "—";
                         }
+                    }
+                    GridCell {
+                        id: waferSerialCell
+                        label: "Serial"
+                        value: {
+                            var info = deviceController.lastWaferInfo;
+                            return (info && info.length > 1 && info[1]) ? info[1] : "—";
+                        }
+                    }
+
+                    Rectangle {
+                        Layout.columnSpan: 2
+                        Layout.fillWidth: true
+                        Layout.preferredHeight: 1
+                        color: Theme.cardBorder
+                        opacity: 0.5
+                    }
+
+                    GridCell {
+                        id: waferCyclesCell
+                        label: "Cycles Completed"
+                        value: {
+                            var info = deviceController.lastWaferInfo;
+                            return (info && info.length > 5 && info[5] !== undefined) ? String(info[5]) : "—";
+                        }
+                        active: root.waferDetected
+                    }
+                    GridCell {
+                        id: waferSensorsCell
+                        label: "Sensors"
+                        value: {
+                            var info = deviceController.lastWaferInfo;
+                            return (info && info.length > 2 && info[2]) ? String(info[2]) : "—";
+                        }
+                    }
+                }
+            }
+        }
+
+        // ── Directory: bottom-left cell ──
+        Rectangle {
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            color: Theme.cardBackground
+            border.color: Theme.cardBorder
+            border.width: 1
+            radius: Theme.radiusSm
+
+            ColumnLayout {
+                anchors.fill: parent
+                anchors.margins: Theme.panelPadding
+                spacing: 6
 
                 RowLayout {
                     Layout.fillWidth: true
                     spacing: 8
-                    Layout.alignment: Qt.AlignVCenter
 
                     Text {
-                        text: "Save dir: " + (deviceController.saveDataDir || "None selected")
+                        text: "DIRECTORY"
+                        color: Theme.sideMutedText
+                        font.pixelSize: Theme.fontSm
+                        font.bold: true
+                        font.letterSpacing: 1.5
+                        font.family: Theme.uiFontFamily
+                        Layout.fillWidth: true
+                    }
+
+                    Rectangle {
+                        visible: root.csvPath !== ""
+                        implicitWidth: sessionSavedLabel.implicitWidth + 12
+                        implicitHeight: 18
+                        radius: 4
+                        color: Theme.fieldBackground
+                        border.color: Theme.sideBorder
+                        border.width: 1
+
+                        Text {
+                            id: sessionSavedLabel
+                            anchors.centerIn: parent
+                            text: "SESSION SAVED"
+                            color: Theme.sideMutedText
+                            font.pixelSize: Theme.fontXs
+                            font.weight: Font.Bold
+                            font.family: Theme.uiFontFamily
+                            font.letterSpacing: 0.6
+                        }
+                    }
+                }
+
+                Item { Layout.fillHeight: true }
+
+                RowLayout {
+                    Layout.fillWidth: true
+                    spacing: 12
+
+                    // Path pinned bottom-left
+                    Text {
+                        text: deviceController.saveDataDir || "Not configured"
                         color: Theme.bodyColor
-                        font.pixelSize: 12
+                        font.pixelSize: Theme.fontMd
+                        font.family: Theme.uiFontFamily
+                        font.italic: true
                         opacity: 0.7
                         elide: Text.ElideMiddle
                         Layout.fillWidth: true
-                        Layout.alignment: Qt.AlignVCenter
                     }
 
                     Button {
                         id: browseBtn
-                        text: "BROWSE..."
+                        text: "Select Folder"
-                        font.pixelSize: 9
+                        font.pixelSize: Theme.fontSm
                         font.weight: Font.Medium
-                        implicitHeight: 20
+                        font.family: Theme.uiFontFamily
-                        implicitWidth: 65
+                        implicitHeight: 24
                         hoverEnabled: true
                         background: Rectangle {
-                            color: parent.hovered ? Theme.buttonNeutralHover : Theme.buttonNeutralBackground
+                            color: browseBtn.hovered ? Theme.buttonNeutralHover : Theme.buttonNeutralBackground
                             border.color: Theme.cardBorder
                             border.width: 1
                             radius: Theme.radiusSm
                         }
                         contentItem: Text {
-                            text: parent.text
+                            text: browseBtn.text
                             color: Theme.bodyColor
-                            font: parent.font
+                            font: browseBtn.font
                             horizontalAlignment: Text.AlignHCenter
                             verticalAlignment: Text.AlignVCenter
                         }
-                        onClicked: saveDirDialog.open()
+                        onClicked: dirOnlyDialog.open()
                     }
                 }
             }
         }
 
-        // --- Wafer Info ---
+        // ── Total Runtime: bottom center ──
-        GroupBox {
+        StatCard {
-            title: "Wafer Information"
+            id: runtimeCard
-            visible: root.waferDetected
+            label: "TOTAL RUNTIME"
-            Layout.fillWidth: true
+            value: {
-
+                var info = deviceController.lastWaferInfo;
-            ColumnLayout {
+                if (!(info && info.length > 4 && info[4] !== undefined)) return "—";
-                anchors.fill: parent
+                var secs = parseFloat(info[4]);
-                anchors.margins: Theme.panelPadding
+                if (isNaN(secs)) return info[4] + "s";
-                spacing: 8
+                var m = Math.floor(secs / 60);
-
+                var s = Math.round(secs % 60);
-                RowLayout {
+                return secs + "s / " + m + ":" + (s < 10 ? "0" : "") + s + " min";
-                    Layout.fillWidth: true
-                    spacing: Theme.rightPaneGap
-
-                    ColumnLayout {
-                        Layout.fillWidth: true
-                        spacing: 4
-                        Text { text: "Family Code"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                        Text { id: waferInfoFamily; text: "—"; color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                    }
-
-                    ColumnLayout {
-                        Layout.fillWidth: true
-                        spacing: 4
-                        Text { text: "Serial Number"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                        Text { id: waferSerial; text: "—"; color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                    }
-
-                    ColumnLayout {
-                        Layout.fillWidth: true
-                        spacing: 4
-                        Text { text: "Sensor Count"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                        Text { id: waferSensors; text: "—"; color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                    }
-                }
-
-                RowLayout {
-                    Layout.fillWidth: true
-                    spacing: Theme.rightPaneGap
-
-                    ColumnLayout {
-                        Layout.fillWidth: true
-                        spacing: 4
-                        Text { text: "Runtime"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                        Text { id: waferRuntime; text: "—"; color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                    }
-
-                    ColumnLayout {
-                        Layout.fillWidth: true
-                        spacing: 4
-                        Text { text: "Cycles"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                        Text { id: waferCycles; text: "—"; color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                    }
-                }
-            }
-        }
-
-        // --- Data Summary (shown after parse) ---
-        GroupBox {
-            title: "Data Summary"
-            visible: root.dataParsed
-            Layout.fillWidth: true
-
-            RowLayout {
-                anchors.fill: parent
-                anchors.margins: Theme.panelPadding
-                spacing: Theme.rightPaneGap
-
-                ColumnLayout {
-                    Layout.fillWidth: true
-                    spacing: 4
-                    Text { text: "Rows"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                    Text { text: String(root.dataRows); color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                }
-
-                ColumnLayout {
-                    Layout.fillWidth: true
-                    spacing: 4
-                    Text { text: "Sensors"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                    Text { text: String(root.dataCols); color: Theme.bodyColor; font.pixelSize: 16; font.bold: true }
-                }
-
-                ColumnLayout {
-                    Layout.fillWidth: true
-                    spacing: 4
-                    Text { text: "CSV"; color: Theme.subheadingColor; font.pixelSize: 12 }
-                    Text { text: root.csvPath; color: Theme.bodyColor; font.pixelSize: 12; elide: Text.ElideMiddle }
             }
         }
     }
 
-        // --- Activity Log ---
+    // ═══════════════════════════════════════════════════════════════════════
+    //  ROW 3: Activity Log — ALWAYS visible (fills remaining height)
+    // ═══════════════════════════════════════════════════════════════════════
     Rectangle {
         Layout.fillWidth: true
         Layout.fillHeight: true
         color: Theme.cardBackground
         border.color: Theme.cardBorder
+        border.width: 1
         radius: Theme.radiusMd
         clip: true
 
@@ -236,63 +498,47 @@ ColumnLayout {
             anchors.fill: parent
             spacing: 0
 
-                // Header
              Rectangle {
                  Layout.fillWidth: true
-                    Layout.preferredHeight: 40
+                 Layout.preferredHeight: 36
                  color: Theme.subtleSectionBackground
+                 radius: Theme.radiusMd
+
+                 // Cover bottom corners so only top-left and top-right are rounded
+                 Rectangle {
+                     anchors.bottom: parent.bottom
+                     anchors.left: parent.left
+                     anchors.right: parent.right
+                     height: parent.radius
+                     color: parent.color
+                 }
 
                 RowLayout {
                     anchors.fill: parent
                     anchors.leftMargin: Theme.panelPadding
                     anchors.rightMargin: Theme.panelPadding
+                    spacing: 8
 
-                        Label {
+                    IconImage {
-                            text: "ACTIVITY LOG"
+                        source: "icons/file-text.svg"
-                            color: Theme.bodyColor
+                        width: 14; height: 14
-                            font.pixelSize: 10
+                        sourceSize.width: 14
-                            font.letterSpacing: 1.8
+                        sourceSize.height: 14
-                            font.weight: Font.Medium
+                        color: Theme.sideMutedText
-                            Layout.fillWidth: true
+                        visible: root.csvPath !== ""
                         Layout.alignment: Qt.AlignVCenter
                     }
 
-                        Button {
+                    Label {
-                            text: "REFRESH SESSION"
+                        text: (root.csvPath !== "" ? root.csvPath.split("/").pop() : "ACTIVITY LOG").toUpperCase()
-                            font.pixelSize: 10
+                        color: Theme.sideMutedText
-                            implicitHeight: 24
+                        font.pixelSize: Theme.fontMd
-                            hoverEnabled: true
+                        font.letterSpacing: 1.5
-                            background: Rectangle {
+                        font.bold: true
-                                color: parent.hovered ? Theme.buttonNeutralHover : "transparent"
+                        font.family: Theme.uiFontFamily
-                                radius: Theme.radiusSm
+                        elide: Text.ElideMiddle
-                            }
+                        Layout.fillWidth: true
-                            contentItem: Text {
+                        Layout.alignment: Qt.AlignVCenter
-                                text: parent.text
-                                color: Theme.bodyColor
-                                font: parent.font
-                                horizontalAlignment: Text.AlignHCenter
-                                verticalAlignment: Text.AlignVCenter
-                            }
-                            onClicked: deviceController.clearSession()
-                        }
-                        
-                        Button {
-                            text: "CLEAR LOG"
-                            font.pixelSize: 10
-                            implicitHeight: 24
-                            hoverEnabled: true
-                            background: Rectangle {
-                                color: parent.hovered ? Theme.buttonNeutralHover : "transparent"
-                                radius: Theme.radiusSm
-                            }
-                            contentItem: Text {
-                                text: parent.text
-                                color: Theme.bodyColor
-                                font: parent.font
-                                horizontalAlignment: Text.AlignHCenter
-                                verticalAlignment: Text.AlignVCenter
-                            }
-                            onClicked: deviceController.clearActivityLog()
                     }
                 }
 
@@ -314,10 +560,12 @@ ColumnLayout {
                 TextArea {
                     id: activityLog
                     width: parent.width
-                         text: qsTr("Welcome — use the side rail to detect a wafer, or import data to review.")
+                    // Bound to backend so log survives tab switches (Loader
+                    // destroys this tab); clears only via Clear Log / restart.
+                    text: deviceController.activityLog || qsTr("Welcome — use the side rail to detect a wafer, or import data to review.")
                     readOnly: true
                     font.family: "monospace"
-                         font.pixelSize: 12
+                    font.pixelSize: Theme.fontSm
                     wrapMode: TextArea.WordWrap
                     color: Theme.bodyColor
                     background: null
@@ -325,60 +573,33 @@ ColumnLayout {
             }
         }
 
-            Connections {
-                target: deviceController
-                function onActivityLogUpdated(newLog) {
-                    activityLog.text = newLog
-                }
-            }
-        }
     }
 
-    // --- Signal Handlers ---
+    // ═══════════════════════════════════════════════════════════════════════
+    //  SIGNAL HANDLERS
+    // ═══════════════════════════════════════════════════════════════════════
     Connections {
         target: deviceController
-
         function onLogMessage(message) {
             if (message == "CHOOSE_SAVE_DIR") {
-                saveDirDialog.open()
+                saveDirDialog.open();
             }
         }
-        
+        function onPortsUpdated() {}
-           // Any operation start (detect/read/erase/debug) latches the panel on.
-           function onPortsUpdated() {
-               // Status tab always visible now
-           }
-
-
         function onDetectResult(result) {
-             if (result && result.familyCode) {
+            if (!result) {
-                 root.waferDetected = true
+                root.dataParsed = false;
-                 waferInfoFamily.text = result.familyCode
+                root.dataRows = 0;
-                 waferSerial.text     = result.serialNumber
+                root.dataCols = 0;
-                 waferSensors.text    = String(result.sensorCount)
+                root.csvPath = "";
-                 waferRuntime.text    = result.runtime + "s"
-                 waferCycles.text     = String(result.cycleCount)
             }
-             // On failure, keep the last displayed wafer info and do not change waferDetected.
         }
-
         function onStatusRestored() {
-             // Show restored wafer info if available
-             var info = deviceController.lastWaferInfo
-             if (info && info.length > 0) {
-                 root.waferDetected = true
-                 waferInfoFamily.text = info[0] || "—"
-                 waferSerial.text     = info[1] || "—"
-                 waferSensors.text    = String(info[2] || 0)
-                 waferRuntime.text    = (info[3] || 0) + "s"
-                 waferCycles.text     = String(info[4] || 0)
-             }
-             // Show data summary if data was previously parsed
             if (deviceController.dataRowCount > 0) {
-                 root.dataParsed = true
+                root.dataParsed = true;
-                 root.dataRows = deviceController.dataRowCount
+                root.dataRows = deviceController.dataRowCount;
-                 root.dataCols = deviceController.dataColCount
+                root.dataCols = deviceController.dataColCount;
-                 root.csvPath = ""  // CSV path not persisted as full path, just show it was parsed
+                root.csvPath = "";
             }
         }
     }
@@ -386,13 +607,12 @@ ColumnLayout {
     Connections {
         target: deviceController
         function onReadResult(result) {
-            root.dataParsed = false
+            root.dataParsed = false;
-            root.dataRows   = 0
+            root.dataRows = 0;
-            root.dataCols   = 0
+            root.dataCols = 0;
-            root.csvPath    = ""
+            root.csvPath = "";
-
             if (result && result.success === true)
-                saveDirDialog.open()
+                saveDirDialog.open();
         }
     }
 
@@ -400,12 +620,19 @@ ColumnLayout {
         target: deviceController
         function onParsedDataReady(result) {
             if (result && result.success) {
-                root.dataParsed = true
+                root.dataParsed = true;
-                root.dataRows   = result.rows
+                root.dataRows = result.rows;
-                root.dataCols   = result.cols
+                root.dataCols = result.cols;
-                root.csvPath    = result.csv_path || ""
+                root.csvPath = result.csv_path || "";
+                if (root.csvPath) {
+                    metaWafer.text = result.serialNumber || "";
+                    metaDate.text = Qt.formatDateTime(new Date(), "yyyy-MM-dd hh:mm:ss");
+                    metaChamber.text = settingsModel.chamberId || "";
+                    metaNotes.text = "";
+                    editCsvDialog.open();
+                }
             } else {
-                root.dataParsed = false
+                root.dataParsed = false;
             }
         }
     }

src/pygui/ISC/Tabs/WaferMapTab.qml

@@ -1,6 +1,6 @@
 import QtQuick
 import QtQuick.Controls
-import QtQuick.Dialogs
+import QtQuick.Controls.impl
 import QtQuick.Layouts
 import ISC
 import ISC.Tabs.components
@@ -10,29 +10,26 @@ Item {
     id: root
     anchors.fill: parent
 
-    // Live elapsed-time counter
+    // Wire streamController.trendDelta (Signal(str) carrying one new
-    property int _liveSecs: 0
+    // [elapsed_s, value] pair per live frame) into the trend chart, which
-    Timer {
+    // accumulates its own bounded 60s window. trendReset clears it when a
-        id: liveTimer
+    // new stream starts. Parsing happens on the Python TrendChartItem side
-        interval: 1000
+    // so malformed payloads are logged there instead of crashing the QML
-        repeat: true
+    // binding.
-        running: streamController.mode === "live" && streamController.state !== "idle"
+    property string loadErrorMessage: ""
-        onTriggered: root._liveSecs++
-        onRunningChanged: if (!running) root._liveSecs = 0
-    }
-    function fmtTime(s) {
-        var m = Math.floor(s / 60)
-        var ss = s % 60
-        return (m < 10 ? "0" : "") + m + ":" + (ss < 10 ? "0" : "") + ss
-    }
-    // Wire streamController.trendData (Signal(str) carrying JSON list of floats)
-    // into the trend chart's data property. The slot parseJsonToData() is defined
-    // on the Python TrendChartItem; we use it so malformed payloads are logged
-    // there instead of crashing the QML binding.
     Connections {
         target: streamController
-        function onTrendData(avgsJson) {
+        function onTrendDelta(deltaJson) {
-            trendChart.setDataFromJson(avgsJson)
+            trendChart.appendDelta(deltaJson);
+        }
+        function onTrendReset() {
+            trendChart.clearTrend();
+        }
+        function onLoadedFileChanged() {
+            root.loadErrorMessage = "";
+        }
+        function onLoadFileError(message) {
+            root.loadErrorMessage = message;
         }
     }
 
@@ -46,107 +43,15 @@ Item {
             Layout.fillWidth: true
             spacing: 10
 
-            // Mode toggle
+            Item {
-            TabBar {
+                Layout.fillWidth: true
-                id: modeBar
-                currentIndex: 0  // Default to "Review"
-                spacing: 2
-                padding: 2
-                background: Rectangle {
-                    color: Theme.subtleSectionBackground
-                    radius: Theme.radiusSm
-                    border.color: Theme.cardBorder
-                    border.width: Theme.borderThin
             }
-                TabButton {
-                    text: "Review"
-                    implicitWidth: 64; implicitHeight: 28
-                    background: Rectangle {
-                        color: parent.checked ? Theme.tabActiveBackground : "transparent"
-                        radius: Theme.radiusSm - 1
-                    }
-                    contentItem: Text {
-                        text: parent.text
-                        color: parent.checked ? Theme.headingColor : Theme.bodyColor
-                        font.pixelSize: 11
-                        font.weight: parent.checked ? Font.Medium : Font.Normal
-                        horizontalAlignment: Text.AlignHCenter
-                        verticalAlignment: Text.AlignVCenter
-                    }
-                }
-                TabButton {
-                    text: "Live"
-                    enabled: deviceController.connectionStatus === "Connected"
-                    opacity: enabled ? 1.0 : 0.4
-                    implicitWidth: 58; implicitHeight: 28
-                    background: Rectangle {
-                        color: parent.checked ? Theme.tabActiveBackground : "transparent"
-                        radius: Theme.radiusSm - 1
-                    }
-                    contentItem: Text {
-                        text: parent.text
-                        color: parent.checked ? Theme.headingColor : Theme.bodyColor
-                        font.pixelSize: 11
-                        font.weight: parent.checked ? Font.Medium : Font.Normal
-                        horizontalAlignment: Text.AlignHCenter
-                        verticalAlignment: Text.AlignVCenter
-                    }
-                }
-                onCurrentIndexChanged:
-                    if (currentIndex === 1){
-                        // Guard: revert to Review if not connected
-                        if (deviceController.connectionStatus !== "Connected") {
-                            currentIndex = 0
-                            return
-                        }
-                        // Entering Live mode
-                        streamController.setMode("live")
-                        var fc = ""
-                        if (deviceController.lastWaferInfo && deviceController.lastWaferInfo.length > 0) {
-                            fc = deviceController.lastWaferInfo[0]
-                        }
-                        streamController.startStream(deviceController.selectedPort, fc)
-                    } else {
-                        // Entering Review Mode (automatically calls stopStream in backend)
-                        streamController.setMode("review")
-                    }
-            }
-
-            // Live source info: WiFi icon + port · serial
-            RowLayout {
-                visible: streamController.mode === "live"
-                spacing: 5
-                // WiFi icon (Unicode approximation; swap for SVG if available)
-                Label {
-                    id: liveIndicator
-                    text: "◉"
-                    color: (deviceController.connectionStatus === "Connected" && streamController.state !== "idle") 
-                           ? Theme.liveColor : Theme.bodyColor
-                    font.pixelSize: 13
-                    
-                    SequentialAnimation on opacity {
-                        running: deviceController.connectionStatus === "Connected" && streamController.state !== "idle"
-                        loops: Animation.Infinite
-                        NumberAnimation { to: 0.2; duration: 600; easing.type: Easing.InOutQuad }
-                        NumberAnimation { to: 1.0; duration: 600; easing.type: Easing.InOutQuad }
-                        onRunningChanged: {
-                            if (!running) liveIndicator.opacity = 1.0
-                        }
-                    }
-                }
-                Label {
-                    text: "Live stream"
-                    color: Theme.bodyColor
-                    font.pixelSize: 11
-                }
-            }
-
-            Item { Layout.fillWidth: true }
 
             // SET badge + avg temp
             Rectangle {
                 visible: streamController.state === "set"
-                height: 22; radius: Theme.radiusSm
+                height: 22
+                radius: Theme.radiusSm
                 color: "transparent"
                 border.color: Theme.liveColor
                 border.width: 1
@@ -154,10 +59,9 @@ Item {
                 Label {
                     id: setLabel
                     anchors.centerIn: parent
-                    text: "SET  " + (streamController.stats.avg !== undefined
+                    text: "SET  " + (streamController.stats.avg !== undefined ? streamController.stats.avg + " avg" : "")
-                                    ? streamController.stats.avg + " avg" : "")
                     color: Theme.liveColor
-                    font.pixelSize: 10
+                    font.pixelSize: Theme.fontXs
                     font.weight: Font.Medium
                     font.letterSpacing: 0.8
                 }
@@ -168,153 +72,150 @@ Item {
                 spacing: 5
                 visible: streamController.recording
                 Rectangle {
-                    width: 7; height: 7; radius: 4
+                    width: 7
+                    height: 7
+                    radius: 4
                     color: Theme.recordColor
                     SequentialAnimation on opacity {
                         running: streamController.recording
                         loops: Animation.Infinite
-                        NumberAnimation { to: 0.2; duration: 600 }
+                        NumberAnimation {
-                        NumberAnimation { to: 1.0; duration: 600 }
+                            to: 0.2
+                            duration: 600
+                        }
+                        NumberAnimation {
+                            to: 1.0
+                            duration: 600
+                        }
                     }
                 }
                 Label {
                     text: "REC"
                     color: Theme.recordColor
-                    font.pixelSize: 10
+                    font.pixelSize: Theme.fontXs
                     font.weight: Font.Medium
                     font.letterSpacing: 1.2
                 }
             }
-
-            // LIVE timer
-            // RowLayout {
-            //     spacing: 5
-            //     visible: streamController.mode === "live" && streamController.state !== "idle"
-            //     Rectangle {
-            //         width: 7; height: 7; radius: 4
-            //         color: Theme.liveColor
-            //     }
-            //     Label {
-            //         text: "LIVE  " + root.fmtTime(root._liveSecs)
-            //         color: Theme.liveColor
-            //         font.pixelSize: 10
-            //         font.weight: Font.Medium
-            //         font.letterSpacing: 0.8
-            //     }
-            // }
-
-            // IDLE label (review / not connected)
-            // Label {
-            //     visible: streamController.mode === "review" || streamController.state === "idle"
-            //     text: streamController.state.toUpperCas`e`()
-            //     color: Theme.bodyColor
-            //     font.pixelSize: 11
-            //     font.weight: Font.Medium
-            //     font.letterSpacing: 1.2
-            // }
-            Button{
-                text: "Export PNG"
-                onClicked: exportDialog.open()
         }
 
-            FileDialog {
+        // ── Load error banner ───────────────────────────────────────────
-                id: exportDialog
+        Rectangle {
-                title: "Export Wafer Map"
+            Layout.fillWidth: true
-                fileMode: FileDialog.SaveFile
+            Layout.preferredHeight: errorRow.implicitHeight + 16
-                nameFilters: ["PNG files (*.png)"]
+            visible: root.loadErrorMessage !== ""
-                onAccepted: waferView.exportImage(String(selectedFile).replace(/^file:\/\//, ""))
+            color: Theme.errorSurface
+            border.color: Theme.statusErrorColor
+            border.width: 1
+            radius: Theme.radiusSm
+
+            RowLayout {
+                id: errorRow
+                anchors.fill: parent
+                anchors.margins: 8
+                spacing: 8
+
+                IconImage {
+                    source: "icons/triangle-alert.svg"
+                    width: 16; height: 16
+                    sourceSize.width: 16
+                    sourceSize.height: 16
+                    color: Theme.errorTextSoft
+                    Layout.alignment: Qt.AlignTop
+                }
+
+                Label {
+                    text: root.loadErrorMessage
+                    color: Theme.errorTextSoft
+                    font.pixelSize: Theme.fontSm
+                    wrapMode: Text.WordWrap
+                    Layout.fillWidth: true
+                }
             }
         }
 
-        // ── Body: 3 zones (TODO P2.1: becomes 2 zones) ──────────────────────
+        // ── Body: 2 columns (wafer + trend + transport | readout) ──────────
-        // -------------------------------------------------------------------
-        // TODO P2.1: Delete the SourcePanel Rectangle (lines ~219-233) —
-        //            the file list moved to the rail (P1.3 Map context panel).
-        //
-        // THINKING:
-        //   SourcePanel shows a file list driven by file_browser — now that
-        //   the Map tab's context panel in the rail (P1.3) provides the same
-        //   file list with search/filter, SourcePanel in the wafer body is
-        //   redundant. The wafer map gets more horizontal space.
-        //
-        //   After deletion: RowLayout has 2 children instead of 3.
-        //   Add Layout.fillWidth: true to the center ColumnLayout so it
-        //   fills the vacated width.
-        //
-        //   Cross-ref: P1.3 (Map context panel), P2.1 (this task)
-        // -------------------------------------------------------------------
         RowLayout {
             Layout.fillWidth: true
             Layout.fillHeight: true
             spacing: 16
 
-            // Source panel — bordered card
-            Rectangle {
-                Layout.preferredWidth: 220
-                Layout.fillHeight: true
-                color: Theme.cardBackground
-                border.color: Theme.cardBorder
-                border.width: 1
-                radius: Theme.radiusMd
-                clip: true
-
-                SourcePanel {
-                    anchors.fill: parent
-                    anchors.margins: 10
-                }
-            }
 
             ColumnLayout {
                 Layout.fillWidth: true
                 Layout.fillHeight: true
-                spacing: 8
+                spacing: 16
 
                 WaferMapView {
                     id: waferView
                     Layout.fillWidth: true
                     Layout.fillHeight: true
+                    Layout.preferredHeight: 400
+                    Layout.minimumHeight: 280
                     blend: readoutPanel.heatmapBlend
                     showLabels: readoutPanel.showLabels
+                    showExtremes: readoutPanel.showExtremes
+                    showThickness: readoutPanel.showThickness
                 }
                 Rectangle {
                     id: trendPane
                     Layout.fillWidth: true
-                    implicitHeight: 160
+                    Layout.fillHeight: false
-                    visible: trendChart.hasData
+                    Layout.preferredHeight: 220
+                    Layout.minimumHeight: 120
+                    visible: trendChart.hasData && streamController.mode === "live"
                     color: Theme.cardBackground
                     border.color: Theme.cardBorder
                     border.width: 1
                     radius: Theme.radiusMd
 
+                    ColumnLayout {
+                        anchors.fill: parent
+                        anchors.margins: 8
+                        spacing: 10
+
                         TrendChartItem {
                             id: trendChart
-                        anchors.fill: parent
-                        anchors.margins: 8
-                    }
-                }
-
-                Item { Layout.fillWidth: true; implicitHeight: 16 }
-                TransportBar { 
                             Layout.fillWidth: true
-                    visible: streamController.mode !== "live" || trendChart.hasData
+                            Layout.fillHeight: true
-                    height: visible ? implicitHeight : 0 
+                        }
                     }
                 }
 
-            // Readout panel — bordered card
+                Item {
-            Rectangle {
+                    Layout.fillWidth: true
-                Layout.preferredWidth: 220
+                    visible: transportBar.hasContent
+                    implicitHeight: trendPane.visible ? 52 : 16
+                }
+                TransportBar {
+                    id: transportBar
+                    Layout.fillWidth: true
+                }
+            }
+
+            // Readout panel — scrolls instead of clipping so the last card
+            // (Thresholds) is always reachable even if content outgrows
+            // the available height (e.g. once E-C delta rows appear).
+            ScrollView {
+                Layout.preferredWidth: Theme.rightRailWidth
                 Layout.fillHeight: true
-                color: Theme.cardBackground
-                border.color: Theme.cardBorder
-                border.width: 1
-                radius: Theme.radiusMd
                 clip: true
+                ScrollBar.horizontal.policy: ScrollBar.AlwaysOff
 
                 ReadoutPanel {
                     id: readoutPanel
-                    anchors.fill: parent
+                    width: parent.width
-                    anchors.margins: 10
+                    hasThicknessData: waferView.hasThickness
+                    onExportRequested: function(filePath, extra) {
+                        waferView.exportImage(filePath, extra);
+                    }
+                    onThicknessFileChosen: function(filePath) {
+                        var err = waferView.loadThickness(filePath);
+                        if (err !== "") {
+                            root.loadErrorMessage = err;
+                            readoutPanel.showThickness = false;
+                        }
+                    }
                 }
             }
         }

src/pygui/ISC/Tabs/components/AppToolTip.qml

@@ -0,0 +1,25 @@
+import QtQuick
+import QtQuick.Controls
+import ISC
+
+// Single seam for tooltip chrome — every hover tip in the app instantiates
+// this instead of styling QtQuick.Controls ToolTip.background/contentItem
+// inline at each call site.
+ToolTip {
+    id: root
+    delay: 400
+    font.pixelSize: Theme.fontXs
+    font.family: Theme.uiFontFamily
+
+    contentItem: Text {
+        text: root.text
+        color: Theme.headingColor
+        font: root.font
+    }
+    background: Rectangle {
+        color: Theme.cardBackground
+        border.color: Theme.sideBorder
+        border.width: 1
+        radius: Theme.radiusXs
+    }
+}

src/pygui/ISC/Tabs/components/ComparisonChartCard.qml

@@ -0,0 +1,260 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import QtQuick.Layouts
+import ISC
+
+// Curve overlay chart card with the alignment timeline scrubber.
+PanelBox {
+    id: card
+
+    required property var trendDataA
+    required property var trendDataB
+    required property int seriesLen
+    required property bool hasSeries
+    required property bool comparing
+
+    // Scrubber position — the internal Slider is private; consumers
+    // read/write frameIndex and call focusScrubber().
+    property alias frameIndex: scrubber.value
+
+    function focusScrubber() { scrubber.forceActiveFocus() }
+
+    implicitHeight: chartCol.implicitHeight + 24
+
+    ColumnLayout {
+        id: chartCol
+        anchors.fill: parent
+        anchors.margins: 12
+        spacing: 8
+
+        RowLayout {
+            Layout.fillWidth: true
+            SectionTitle {
+                text: "CURVE OVERLAY"
+                Layout.fillWidth: true
+            }
+            Row {
+                spacing: 16
+                visible: card.hasSeries
+                Row {
+                    spacing: 4
+                    Rectangle { width: 12; height: 3; radius: 1.5; color: Theme.primaryAccent; anchors.verticalCenter: parent.verticalCenter }
+                    Label { text: "Run A"; font.pixelSize: Theme.fontXs; color: Theme.bodyColor }
+
+                }
+                Row {
+                    spacing: 4
+                    Rectangle { width: 12; height: 3; radius: 1.5; color: Theme.themeSkill; anchors.verticalCenter: parent.verticalCenter }
+                    Label { text: "Run B"; font.pixelSize: Theme.fontXs; color: Theme.bodyColor }
+                }
+            }
+        }
+
+        Rectangle {
+            Layout.fillWidth: true
+            Layout.preferredHeight: 200
+            color: Theme.fieldBackground
+            border.color: Theme.cardBorder
+            border.width: 1
+            radius: Theme.radiusSm
+            clip: true
+
+            Canvas {
+                id: overlayCanvas
+                anchors.fill: parent
+                visible: card.hasSeries
+
+                readonly property real padLeft: 50
+                readonly property real padRight: 16
+                readonly property real padTop: 24
+                readonly property real padBottom: 36
+
+                // Nice tick step (1/2/5 × 10^k) — same scheme as TrendChartItem,
+                // so labels land on round numbers instead of raw data min/max.
+                function niceStep(rawStep) {
+                    var mag = Math.pow(10, Math.floor(Math.log10(rawStep)))
+                    return [1, 2, 5, 10].map(function (s) { return s * mag })
+                                        .find(function (s) { return s >= rawStep })
+                }
+
+                function drawGrid(ctx, minV, maxV, yStep, dataLen) {
+                    var plotW = width - padLeft - padRight
+                    var plotH = height - padTop - padBottom
+                    var range = (maxV - minV) || 1
+
+                    ctx.strokeStyle = Theme.chartGridLine
+                    ctx.lineWidth = 1
+                    ctx.fillStyle = Theme.chartAxisText
+                    ctx.font = "10px " + Theme.uiFontFamily
+                    ctx.textAlign = "right"
+
+                    var ySteps = Math.max(1, Math.round(range / yStep))
+                    var yDec = Math.max(0, -Math.floor(Math.log10(yStep)))
+                    for (var yi = 0; yi <= ySteps; yi++) {
+                        var yFrac = yi / ySteps
+                        var yPx = padTop + plotH * yFrac
+                        var yVal = maxV - yFrac * range
+
+                        ctx.beginPath()
+                        ctx.moveTo(padLeft, yPx)
+                        ctx.lineTo(padLeft + plotW, yPx)
+                        ctx.stroke()
+
+                        ctx.fillText(yVal.toFixed(yDec), padLeft - 6, yPx + 3)
+                    }
+
+                    ctx.textAlign = "center"
+                    var xMax = dataLen - 1
+                    if (xMax > 0) {
+                        var xStep = niceStep(xMax / 5 || 1)
+                        for (var xIdx = 0; xIdx <= xMax; xIdx += xStep) {
+                            var xPx = padLeft + (xIdx / xMax) * plotW
+                            ctx.fillText(xIdx.toString(), xPx, height - 20)
+                        }
+                    }
+
+                    ctx.save()
+                    ctx.translate(14, padTop + plotH / 2)
+                    ctx.rotate(-Math.PI / 2)
+                    ctx.textAlign = "center"
+                    ctx.font = "12px " + Theme.uiFontFamily
+                    ctx.fillText("Celcius (°C)", 0, 0)
+                    ctx.restore()
+
+                    ctx.textAlign = "center"
+                    ctx.font = "12px " + Theme.uiFontFamily
+                    ctx.fillText("Frame", padLeft + plotW / 2, height - 4)
+                }
+
+                function drawSeries(ctx, series, minV, range, color, dataLen) {
+                    // x is mapped against the shared frame domain (dataLen), not the
+                    // series' own length — otherwise a shorter run's line stretches to
+                    // fill the whole plot instead of stopping where its data ends.
+                    if (series.length < 2) return
+                    var plotW = width - padLeft - padRight
+                    var plotH = height - padTop - padBottom
+
+                    ctx.strokeStyle = color
+                    ctx.lineWidth = 2
+                    ctx.beginPath()
+                    for (var i = 0; i < series.length; i++) {
+                        var x = padLeft + (i / (dataLen - 1)) * plotW
+                        var y = padTop + plotH - ((series[i] - minV) / range) * plotH
+                        if (i === 0) ctx.moveTo(x, y)
+                        else ctx.lineTo(x, y)
+                    }
+                    ctx.stroke()
+                }
+
+                function drawScrubMarker(ctx) {
+                    if (card.seriesLen < 2) return
+                    var plotW = width - padLeft - padRight
+                    var x = padLeft + (scrubber.value / (card.seriesLen - 1)) * plotW
+                    ctx.strokeStyle = Theme.primaryAccent
+                    ctx.lineWidth = 1.5
+                    ctx.setLineDash([3, 3])
+                    ctx.beginPath()
+                    ctx.moveTo(x, padTop)
+                    ctx.lineTo(x, height - padBottom)
+                    ctx.stroke()
+                    ctx.setLineDash([])
+                }
+
+                onPaint: {
+                    var ctx = getContext("2d")
+                    ctx.reset()
+                    if (!card.hasSeries) return
+                    var all = card.trendDataA.concat(card.trendDataB)
+                    var minV = Math.min.apply(null, all)
+                    var maxV = Math.max.apply(null, all)
+                    var padding = (maxV - minV) * 0.05
+                    minV -= padding
+                    maxV += padding
+                    // Snap bounds to nice-step multiples -> stable round-number axis
+                    var yStep = niceStep((maxV - minV) / 5 || 1)
+                    minV = Math.floor(minV / yStep) * yStep
+                    maxV = Math.ceil(maxV / yStep) * yStep
+                    var range = (maxV - minV) || 1
+
+                    drawGrid(ctx, minV, maxV, yStep, card.seriesLen)
+                    drawSeries(ctx, card.trendDataA, minV, range, Theme.primaryAccent, card.seriesLen)
+                    drawSeries(ctx, card.trendDataB, minV, range, Theme.themeSkill, card.seriesLen)
+                    drawScrubMarker(ctx)
+                }
+
+                Connections {
+                    target: card
+                    function onTrendDataAChanged() { overlayCanvas.requestPaint() }
+                    function onTrendDataBChanged() { overlayCanvas.requestPaint() }
+                }
+                Connections {
+                    target: scrubber
+                    function onValueChanged() { overlayCanvas.requestPaint() }
+                }
+            }
+
+            // Empty state
+            ColumnLayout {
+                anchors.centerIn: parent
+                visible: !card.hasSeries
+                spacing: 8
+
+                IconImage {
+                    Layout.alignment: Qt.AlignHCenter
+                    visible: !card.comparing
+                    source: "../icons/bar-chart.svg"
+                    width: 32; height: 32
+                    sourceSize.width: 32
+                    sourceSize.height: 32
+                    color: Theme.sideMutedText
+                }
+                Label {
+                    Layout.alignment: Qt.AlignHCenter
+                    text: card.comparing ? "Running DTW comparison…" : "Select two runs and run comparison"
+                    color: Theme.bodyColor
+                    font.pixelSize: Theme.fontSm
+                }
+                Label {
+                    Layout.alignment: Qt.AlignHCenter
+                    visible: !card.comparing
+                    text: "Click a run box on the right, then select a file from the left panel."
+                    color: Theme.sideMutedText
+                    font.pixelSize: Theme.fontXs
+                }
+            }
+        }
+
+        // ── Alignment Timeline Scrubber ────────────
+        ColumnLayout {
+            Layout.fillWidth: true
+            spacing: 4
+            visible: card.hasSeries
+
+            Rectangle {
+                Layout.fillWidth: true
+                height: 1
+                color: Theme.cardBorder
+            }
+
+            SectionTitle {
+                text: "TIMELINE SCRUBBER"
+                Layout.fillWidth: true
+                Layout.topMargin: 8
+            }
+
+            Slider {
+                id: scrubber
+                Layout.fillWidth: true
+                leftPadding: overlayCanvas.padLeft
+                rightPadding: overlayCanvas.padRight
+                from: 0
+                to: Math.max(1, card.seriesLen - 1)
+                stepSize: 1
+                value: 0
+            }
+
+
+        }
+    }
+}

src/pygui/ISC/Tabs/components/ComparisonSidePanel.qml

@@ -0,0 +1,239 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Layouts
+import ISC
+
+// Right-column bento stack: DTW readout, overlap settings, frame/time
+// controls, and scrubber readout. Pure view — all comparison state lives
+// on DataTab; scrubber writes go up via frameIndexRequested.
+ColumnLayout {
+    id: panel
+
+    required property real warpingDistance
+    required property int frameOffset
+    required property real frameOffsetSeconds
+    required property real maxSensorDeviation
+    required property int seriesLen
+    required property bool hasSeries
+    required property var trendDataA
+    required property var trendDataB
+    required property var timeDataA
+    required property var timeDataB
+    required property var frameForTime   // function(seconds) -> frame index
+    required property real frameIndex    // bound from ComparisonChartCard.frameIndex
+
+    // Overlap settings outputs (consumed by OverlapMapCard via DataTab)
+    property alias overlapEnabled: enableOverlapCheck.checked
+    property alias blendAmount: blendSlider.value
+
+    signal frameIndexRequested(real idx)
+    signal scrubberFocusRequested()
+
+    spacing: 12
+
+    // Bento 3: DTW Comparison Readout
+    PanelBox {
+        Layout.fillWidth: true
+        Layout.preferredHeight: readoutCol.implicitHeight + 24
+
+        ColumnLayout {
+            id: readoutCol
+            anchors.fill: parent
+            anchors.margins: 12
+            spacing: 8
+
+            SectionTitle { text: "DTW READOUT" }
+
+            ReadoutStat {
+                label: "DTW ALIGNMENT DISTANCE"
+                value: panel.warpingDistance >= 0 ? panel.warpingDistance.toFixed(2) : "--"
+                valueColor: panel.warpingDistance >= 0
+                    ? (panel.warpingDistance < 50 ? Theme.metricGood : panel.warpingDistance < 100 ? Theme.metricWarn : Theme.metricBad)
+                    : Theme.sideMutedText
+            }
+            ReadoutStat {
+                label: "TEMPORAL FRAME OFFSET"
+                value: panel.warpingDistance >= 0
+                    ? ((panel.frameOffset >= 0 ? "+" : "") + panel.frameOffset + " frames / "
+                       + (panel.frameOffsetSeconds >= 0 ? "+" : "") + panel.frameOffsetSeconds.toFixed(1) + "s")
+                    : "--"
+                valueColor: panel.warpingDistance >= 0 ? Theme.headingColor : Theme.sideMutedText
+            }
+            ReadoutStat {
+                label: "MAX SENSOR DEVIATION"
+                value: panel.maxSensorDeviation >= 0 ? panel.maxSensorDeviation.toFixed(2) + "°C" : "--"
+                valueColor: panel.maxSensorDeviation >= 0
+                    ? (panel.maxSensorDeviation < 1.0 ? Theme.metricGood : panel.maxSensorDeviation < 3.0 ? Theme.metricWarn : Theme.metricBad)
+                    : Theme.sideMutedText
+            }
+        }
+    }
+
+    // Bento 2: Overlap Map Settings
+    PanelBox {
+        Layout.fillWidth: true
+        Layout.preferredHeight: overlapCol.implicitHeight + 24
+
+        ColumnLayout {
+            id: overlapCol
+            anchors.fill: parent
+            anchors.margins: 12
+            spacing: 8
+
+            SectionTitle { text: "OVERLAP SETTINGS" }
+
+            PanelCheckBox {
+                id: enableOverlapCheck
+                Layout.fillWidth: true
+                checked: true
+                text: "Enable Overlap Map"
+                font.pixelSize: Theme.fontSm
+            }
+
+            ColumnLayout {
+                Layout.fillWidth: true
+                spacing: 6
+                visible: enableOverlapCheck.checked
+
+                Rectangle {
+                    Layout.fillWidth: true
+                    height: 1
+                    color: Theme.cardBorder
+                }
+
+                RowLayout {
+                    Layout.fillWidth: true
+                    spacing: 6
+                    Label {
+                        text: "Blend"
+                        font.pixelSize: Theme.fontSm
+                        color: Theme.bodyColor
+                        Layout.preferredWidth: 40
+                    }
+                    PanelSlider {
+                        id: blendSlider
+                        Layout.fillWidth: true
+                        from: 0; to: 100; value: 50
+                        stepSize: 1
+                    }
+                    Label {
+                        text: Math.round(blendSlider.value) + "%"
+                        font.pixelSize: Theme.fontSm
+                        color: Theme.sideMutedText
+                        Layout.preferredWidth: 30
+                    }
+                }
+
+                // Diff color legend
+                Row {
+                    Layout.fillWidth: true
+                    spacing: 10
+                    Row {
+                        spacing: 3
+                        Rectangle { width: 8; height: 8; radius: 4; color: Theme.sensorLow; anchors.verticalCenter: parent.verticalCenter }
+                        Label { text: "B cooler"; font.pixelSize: Theme.fontSm; color: Theme.sideMutedText }
+                    }
+                    Row {
+                        spacing: 3
+                        Rectangle { width: 8; height: 8; radius: 4; color: Theme.sensorInRange; anchors.verticalCenter: parent.verticalCenter }
+                        Label { text: "Match"; font.pixelSize: Theme.fontSm; color: Theme.sideMutedText }
+                    }
+                    Row {
+                        spacing: 3
+                        Rectangle { width: 8; height: 8; radius: 4; color: Theme.sensorHigh; anchors.verticalCenter: parent.verticalCenter }
+                        Label { text: "B hotter"; font.pixelSize: Theme.fontSm; color: Theme.sideMutedText }
+                    }
+                }
+            }
+        }
+    }
+
+    // Bento: Frame / Time Controls
+    PanelBox {
+        Layout.fillWidth: true
+        Layout.preferredHeight: frameTimeCol.implicitHeight + 32
+
+        ColumnLayout {
+            id: frameTimeCol
+            anchors.fill: parent
+            anchors.margins: 16
+            spacing: 20
+
+            SectionTitle { text: "FRAME / TIME" }
+
+            EditableScrubStat {
+                label: "Frame"
+                value: scrubReadout.scrubIdx
+                unit: "/ " + Math.max(0, panel.seriesLen - 1) + (Math.max(0, panel.seriesLen - 1) <= 1 ? " frame" : " frames")
+                editable: panel.hasSeries
+                onValueEdited: (newValue) => {
+                    var maxVal = Math.max(0, panel.seriesLen - 1)
+                    var val = Math.max(0, Math.min(newValue, maxVal))
+                    panel.frameIndexRequested(val)
+                }
+                onEditingDone: panel.scrubberFocusRequested()
+            }
+
+            EditableScrubStat {
+                label: "Time"
+                value: scrubReadout.scrubTime
+                unit: "/ " + scrubReadout.maxTime.toFixed(1) + "s"
+                editable: panel.hasSeries
+                onValueEdited: (newValue) => {
+                    var closestIdx = panel.frameForTime(newValue)
+                    panel.frameIndexRequested(closestIdx)
+                }
+                onEditingDone: panel.scrubberFocusRequested()
+            }
+        }
+    }
+
+    // Bento: Scrub Readout
+    PanelBox {
+        Layout.fillWidth: true
+        Layout.preferredHeight: scrubReadout.implicitHeight + 24
+
+        ColumnLayout {
+            id: scrubReadout
+            anchors.fill: parent
+            anchors.margins: 12
+            spacing: 8
+
+            readonly property int scrubIdx: Math.round(panel.frameIndex)
+            readonly property bool hasA: scrubIdx < panel.trendDataA.length
+            readonly property bool hasB: scrubIdx < panel.trendDataB.length
+            readonly property real tempA: hasA ? panel.trendDataA[scrubIdx] : 0
+            readonly property real tempB: hasB ? panel.trendDataB[scrubIdx] : 0
+            readonly property real scrubTime: {
+                var t = scrubIdx < panel.timeDataA.length ? panel.timeDataA[scrubIdx]
+                      : (scrubIdx < panel.timeDataB.length ? panel.timeDataB[scrubIdx] : 0)
+                return t
+            }
+            readonly property real maxTime: {
+                var ta = panel.timeDataA.length > 0 ? panel.timeDataA[panel.timeDataA.length - 1] : 0
+                var tb = panel.timeDataB.length > 0 ? panel.timeDataB[panel.timeDataB.length - 1] : 0
+                return Math.max(ta, tb)
+            }
+
+            SectionTitle { text: "SCRUBBER READOUT" }
+
+            ReadoutStat {
+                label: "Temp (Run A)"
+                value: scrubReadout.hasA ? scrubReadout.tempA.toFixed(1) + "°C" : "none"
+                valueColor: Theme.primaryAccent
+            }
+            ReadoutStat {
+                label: "Temp (Run B)"
+                value: scrubReadout.hasB ? scrubReadout.tempB.toFixed(1) + "°C" : "none"
+                valueColor: Theme.themeSkill
+            }
+            ReadoutStat {
+                label: "Difference"
+                value: (scrubReadout.hasA && scrubReadout.hasB)
+                    ? Math.abs(scrubReadout.tempA - scrubReadout.tempB).toFixed(1) + "°C" : "none"
+            }
+        }
+    }
+
+    Item { Layout.fillHeight: true }
+}

src/pygui/ISC/Tabs/components/ConnectionFooter.qml

@@ -0,0 +1,102 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Layouts
+import ISC
+
+// ── BOX 3: Hardware Status Footer ──────────────────────────
+Rectangle {
+    Layout.fillWidth: true
+    Layout.preferredHeight: Theme.sideFooterConnection
+    visible: root.selectedTabIndex !== 1
+    radius: Theme.sidePanelRadius
+    border.color: Theme.sideBorder
+    border.width: 1
+    color: Theme.sidePanelBackground
+    clip: true
+
+    ColumnLayout {
+        anchors.fill: parent
+        anchors.margins: 14
+        spacing: 6
+
+        // Row 1: Title
+        Label {
+            text: "CONNECTION FLOW"
+            color: Theme.sideMutedText
+            font.family: Theme.uiFontFamily
+            font.pixelSize: Theme.fontSm
+            font.letterSpacing: 1.5
+            font.bold: true
+            Layout.fillWidth: true
+            elide: Text.ElideRight
+        }
+
+        // Row 2: Port / descriptive text
+        Label {
+            Layout.fillWidth: true
+            text: {
+                if (deviceController.connectionStatus === "Connected")
+                    return deviceController.selectedPort || "Connected"
+                if (deviceController.selectedPort)
+                    return deviceController.selectedPort
+                return "No port selected"
+            }
+            color: Theme.bodyColor
+            font.family: Theme.uiFontFamily
+            font.pixelSize: Theme.fontSm
+            elide: Text.ElideRight
+        }
+
+        Item { Layout.fillHeight: true }
+
+        // Row 3: Mode chip left, status badge bottom-right
+        RowLayout {
+            spacing: 6
+            Layout.fillWidth: true
+
+            Rectangle {
+                width: modeChipLabel.implicitWidth + 12
+                height: 18
+                radius: 4
+                color: Theme.fieldBackground
+                border.color: Theme.sideBorder
+                border.width: 1
+
+                Label {
+                    id: modeChipLabel
+                    anchors.centerIn: parent
+                    text: streamController.mode
+                        ? streamController.mode.toUpperCase() : "REVIEW"
+                    color: Theme.sideMutedText
+                    font.family: Theme.uiFontFamily
+                    font.pixelSize: Theme.fontXs
+                    font.bold: true
+                    font.letterSpacing: 0.8
+                }
+            }
+
+            Item { Layout.fillWidth: true }
+
+            Rectangle {
+                height: 18
+                width: badgeLabel.implicitWidth + 14
+                radius: 9
+                color: {
+                    var s = deviceController.connectionStatus
+                    if (s === "Connected") return Theme.statusSuccessColor
+                    if (s === "Disconnected") return Theme.statusErrorColor
+                    return Theme.statusWarningColor
+                }
+
+                Label {
+                    id: badgeLabel
+                    anchors.centerIn: parent
+                    text: deviceController.connectionStatus || "Disconnected"
+                    color: Theme.statusBadgeText
+                    font.pixelSize: Theme.fontXs
+                    font.bold: true
+                }
+            }
+        }
+    }
+}

src/pygui/ISC/Tabs/components/EditableScrubStat.qml

@@ -0,0 +1,113 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Layouts
+import ISC
+
+// Editable stat box for scrubber readout (styled to match DTW ReadoutCard)
+Rectangle {
+    id: edStat
+    property string label
+    property real value
+    property string unit
+    property string extraText: ""
+    property bool editable: true
+    signal valueEdited(real newValue)
+    // Fires when the input field commits (Enter/focus loss), even if the
+    // entered text was invalid — callers use it to hand focus back to the
+    // timeline scrubber, matching the pre-extraction behavior.
+    signal editingDone()
+
+    Layout.fillWidth: true
+    implicitHeight: edStatRow.implicitHeight + 16
+    radius: Theme.radiusSm
+    color: Theme.subtleSectionBackground
+    border.color: (edStat.editable && inputField.activeFocus) ? Theme.fieldBorderFocus : Theme.cardBorder
+    border.width: (edStat.editable && inputField.activeFocus) ? Theme.borderStrong : Theme.borderThin
+
+    RowLayout {
+        id: edStatRow
+        anchors.fill: parent
+        anchors.margins: 8
+        spacing: 6
+
+        ColumnLayout {
+            Layout.fillWidth: true
+            spacing: 2
+            Label {
+                text: edStat.label.toUpperCase()
+                font.pixelSize: Theme.fontXs
+                font.bold: true
+                font.letterSpacing: 0.2
+                color: Theme.sideMutedText
+            }
+            RowLayout {
+                spacing: 4
+                TextField {
+                    id: inputField
+                    readOnly: !edStat.editable
+                    hoverEnabled: edStat.editable
+                    font.pixelSize: Theme.fontLg
+                    font.bold: true
+                    font.family: Theme.codeFontFamily
+                    color: edStat.editable ? Theme.headingColor : Theme.sideMutedText
+                    verticalAlignment: TextInput.AlignVCenter
+                    horizontalAlignment: TextInput.AlignHCenter
+                    background: Rectangle {
+                        visible: edStat.editable
+                        color: Theme.fieldBackground
+                        radius: Theme.radiusXs
+                        border.color: inputField.activeFocus ? Theme.fieldBorderFocus : (inputField.hovered ? Theme.fieldBorderFocus : Theme.fieldBorder)
+                        border.width: 1
+                    }
+                    padding: 0
+                    leftPadding: edStat.editable ? 6 : 0
+                    rightPadding: edStat.editable ? 6 : 0
+                    topPadding: edStat.editable ? 5 : 0
+                    bottomPadding: edStat.editable ? 5 : 0
+                    selectByMouse: edStat.editable
+                    inputMethodHints: edStat.label === "Time" ? Qt.ImhFormattedNumbersOnly : Qt.ImhDigitsOnly
+                    Layout.preferredWidth: edStat.editable ? Math.max(36, contentWidth + 12) : contentWidth
+                    Layout.preferredHeight: edStat.editable ? 32 : implicitHeight
+
+                    text: edStat.value.toFixed(edStat.label === "Time" ? 1 : 0)
+
+                    onEditingFinished: {
+                        var val = parseFloat(text)
+                        if (!isNaN(val)) {
+                            edStat.valueEdited(val)
+                        }
+                        text = edStat.value.toFixed(edStat.label === "Time" ? 1 : 0)
+                        edStat.editingDone()
+                    }
+
+                    Connections {
+                        target: edStat
+                        function onValueChanged() {
+                            if (!inputField.activeFocus) {
+                                inputField.text = edStat.value.toFixed(edStat.label === "Time" ? 1 : 0)
+                            }
+                        }
+                    }
+                }
+                Label {
+                    text: edStat.unit
+                    font.pixelSize: Theme.fontLg
+                    font.bold: true
+                    font.family: Theme.codeFontFamily
+                    color: edStat.editable ? Theme.headingColor : Theme.sideMutedText
+                    Layout.alignment: Qt.AlignVCenter
+                }
+            }
+        }
+
+        Label {
+            visible: edStat.extraText !== ""
+            text: edStat.extraText
+            font.pixelSize: Theme.fontLg
+            font.bold: true
+            font.family: Theme.codeFontFamily
+            color: Theme.headingColor
+            Layout.alignment: Qt.AlignVCenter
+        }
+    }
+}

src/pygui/ISC/Tabs/components/MetricRow.qml

@@ -0,0 +1,28 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Layouts
+import ISC
+
+RowLayout {
+    property string label
+    property string value
+    property color valueColor: Theme.headingColor
+    Layout.fillWidth: true
+    spacing: 4
+
+    Label {
+        text: label
+        color: Theme.sideMutedText
+        font.family: Theme.uiFontFamily
+        font.pixelSize: Theme.fontMd
+        font.bold: true
+        Layout.fillWidth: true
+    }
+    Label {
+        text: value
+        color: valueColor
+        font.family: Theme.codeFontFamily
+        font.pixelSize: Theme.fontMd
+        font.bold: true
+    }
+}

src/pygui/ISC/Tabs/components/OverlapMapCard.qml

@@ -0,0 +1,86 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import QtQuick.Layouts
+import ISC
+import ISC.Wafer
+
+// Wafer overlap map card — renders per-sensor Run A/Run B temperature
+// differences at the current scrub position.
+PanelBox {
+    id: card
+
+    required property var sensorLayout
+    required property var diffValues
+    required property var diffBands      // function(values) -> band thresholds
+    required property string waferShape
+    required property real waferSize
+    required property bool overlapEnabled
+    required property real blendAmount   // 0–100, percent
+
+    ColumnLayout {
+        anchors.fill: parent
+        anchors.margins: 12
+        spacing: 8
+
+        RowLayout {
+            Layout.fillWidth: true
+            SectionTitle {
+                text: "WAFER OVERLAP"
+                Layout.fillWidth: true
+            }
+        }
+
+        Rectangle {
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            color: Theme.fieldBackground
+            border.color: Theme.cardBorder
+            border.width: 1
+            radius: Theme.radiusSm
+            clip: true
+
+            WaferMapItem {
+                id: overlapMapItem
+                anchors.fill: parent
+                visible: card.sensorLayout.length > 0 && card.overlapEnabled
+                sensors: card.sensorLayout
+                values: card.diffValues
+                bands: card.diffBands(overlapMapItem.values)
+                shape: card.waferShape
+                size: card.waferSize
+                target: 0
+                margin: 1.0
+                blend: card.blendAmount / 100
+                showLabels: true
+                ringColor: Theme.waferRingColor
+                axisColor: Theme.waferAxisColor
+                lowColor: Theme.sensorLow
+                inRangeColor: Theme.sensorInRange
+                highColor: Theme.sensorHigh
+                textColor: Theme.headingColor
+            }
+
+            ColumnLayout {
+                anchors.centerIn: parent
+                visible: card.sensorLayout.length === 0 || !card.overlapEnabled
+                spacing: 4
+                IconImage {
+                    Layout.alignment: Qt.AlignHCenter
+                    source: "../icons/map.svg"
+                    width: 24; height: 24
+                    sourceSize.width: 24
+                    sourceSize.height: 24
+                    color: Theme.sideMutedText
+                }
+                Label {
+                    Layout.alignment: Qt.AlignHCenter
+                    text: !card.overlapEnabled ? "Overlap map disabled"
+                        : "No sensor map available"
+                    color: Theme.bodyColor
+                    font.pixelSize: Theme.fontXs
+                }
+            }
+        }
+    }
+}

src/pygui/ISC/Tabs/components/PanelBox.qml

@@ -0,0 +1,10 @@
+import QtQuick
+import ISC
+
+// Card container for the Data tab bento boxes.
+Rectangle {
+    color: Theme.sidePanelBackground
+    border.color: Theme.sideBorder
+    border.width: 1
+    radius: Theme.sidePanelRadius
+}

src/pygui/ISC/Tabs/components/PanelCheckBox.qml

@@ -0,0 +1,43 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import ISC
+
+// Checkbox styled to match MapTab's right-rail ReadoutPanel (square accent
+// indicator + check icon) instead of the platform-default CheckBox look.
+CheckBox {
+    id: toggle
+    indicator: Rectangle {
+        implicitWidth: 18
+        implicitHeight: 18
+        x: toggle.leftPadding
+        y: parent.height / 2 - height / 2
+        radius: Theme.radiusXs
+        color: toggle.checked ? Theme.primaryAccent : "transparent"
+        border.width: Theme.borderThin
+        border.color: toggle.checked ? Theme.primaryAccent : Theme.fieldBorder
+
+        Behavior on color { ColorAnimation { duration: Theme.durationFast } }
+        Behavior on border.color { ColorAnimation { duration: Theme.durationFast } }
+
+        IconImage {
+            anchors.centerIn: parent
+            source: "../icons/check.svg"
+            width: 12; height: 12
+            sourceSize.width: 12
+            sourceSize.height: 12
+            color: Theme.panelBackground
+            opacity: toggle.checked ? 1.0 : 0.0
+            Behavior on opacity { NumberAnimation { duration: Theme.durationFast } }
+        }
+    }
+
+    contentItem: Text {
+        text: toggle.text
+        color: Theme.headingColor
+        font.family: Theme.uiFontFamily
+        verticalAlignment: Text.AlignVCenter
+        leftPadding: toggle.indicator.width + toggle.spacing
+        font.pixelSize: toggle.font.pixelSize || Theme.fontXs
+    }
+}

src/pygui/ISC/Tabs/components/PanelSlider.qml

@@ -0,0 +1,19 @@
+import QtQuick
+import QtQuick.Controls
+import ISC
+
+// Slider styled to match MapTab's right-rail heatmap slider (circular
+// accent handle that grows slightly on press).
+Slider {
+    id: panelSlider
+    handle: Rectangle {
+        x: panelSlider.leftPadding + panelSlider.visualPosition * (panelSlider.availableWidth - width)
+        y: panelSlider.topPadding + panelSlider.availableHeight / 2 - height / 2
+        implicitWidth: 18
+        implicitHeight: 18
+        radius: 9
+        color: Theme.primaryAccent
+        scale: panelSlider.pressed ? 1.15 : 1.0
+        Behavior on scale { NumberAnimation { duration: Theme.durationFast; easing.type: Theme.easeStandard } }
+    }
+}

src/pygui/ISC/Tabs/components/RailActionButton.qml

@@ -0,0 +1,73 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import ISC
+
+// ===== Rail Action Button =====
+// Reusable pill-style button for rail action panels.
+// Icon left, uppercase label, fixed height, hover/active backgrounds.
+Rectangle {
+    id: root
+
+    property string label: ""
+    property string iconSource: ""
+    property bool destructive: false
+    // Set true to show the button as "active" (e.g. a one-shot toggle
+    // that's mid-operation), independent of hover/press state.
+    property bool toggled: false
+    property color _textColor: !root.enabled ? Theme.sideMutedText
+        : root.destructive ? Theme.statusErrorColor
+        : Theme.headingColor
+
+    signal clicked()
+
+    implicitHeight: Theme.sideButtonHeight
+    radius: 8
+    color: root.toggled || mouseArea.containsMouse || mouseArea.pressed
+        ? Theme.sideActiveBackground : "transparent"
+    border.width: 0
+
+    Behavior on color {
+        ColorAnimation { duration: 100 }
+    }
+
+    Row {
+        anchors.fill: parent
+        anchors.leftMargin: 12
+        anchors.rightMargin: 12
+        spacing: 10
+
+        IconImage {
+            anchors.verticalCenter: parent.verticalCenter
+            width: 18
+            height: 18
+            source: root.iconSource
+            sourceSize.width: 18
+            sourceSize.height: 18
+            color: root._textColor
+            opacity: root.enabled ? 0.85 : 0.35
+        }
+
+        Label {
+            anchors.verticalCenter: parent.verticalCenter
+            text: root.label
+            color: root._textColor
+            font.family: Theme.uiFontFamily
+            font.pixelSize: Theme.fontSm
+            font.bold: true
+            font.letterSpacing: 1.2
+            opacity: root.enabled ? 1.0 : 0.4
+            elide: Text.ElideRight
+        }
+    }
+
+    MouseArea {
+        id: mouseArea
+        anchors.fill: parent
+        hoverEnabled: root.enabled
+        cursorShape: root.enabled ? Qt.PointingHandCursor : Qt.ArrowCursor
+        onClicked: {
+            if (root.enabled) root.clicked()
+        }
+    }
+}

src/pygui/ISC/Tabs/components/ReadoutPanel.qml

@@ -1,247 +1,231 @@
 import QtQuick
 import QtQuick.Controls
+import QtQuick.Dialogs
 import QtQuick.Layouts
 import ISC
 
+// ===== Readout Panel =====
+// Right-rail panel with three bento-tile sections: READOUT, DISPLAY,
+// THRESHOLDS. Uses the same PanelBox / SectionTitle / ReadoutStat /
+// PanelCheckBox / PanelSlider components as the Data tab's
+// ComparisonSidePanel, so both right rails share one visual language.
 ColumnLayout {
-    spacing: 0
+    id: root
+    spacing: 6
     property var s: streamController.stats
     property alias showLabels: labelsToggle.checked
+    property alias showExtremes: extremesToggle.checked
     property alias heatmapBlend: heatmapSlider.value
+    property alias showThickness: thicknessToggle.checked
+    property bool hasThicknessData: false
 
-    component PanelCheckBox: CheckBox {
+    signal exportRequested(string filePath, string extra)
-        id: toggle
+    signal thicknessFileChosen(string filePath)
-        indicator: Rectangle {
-            implicitWidth: 18
-            implicitHeight: 18
-            x: toggle.leftPadding
-            y: parent.height / 2 - height / 2
-            radius: Theme.radiusXs
-            color: toggle.checked ? Theme.primaryAccent : "transparent"
-            border.width: Theme.borderThin
-            border.color: toggle.checked ? Theme.primaryAccent : Theme.fieldBorder
 
-            Text {
+    component BadgePill: Rectangle {
-                anchors.centerIn: parent
+        implicitWidth: badgeLabel.implicitWidth + 10
-                text: "✓"
+        implicitHeight: 10
-                font.pixelSize: 13
+        radius: 9
-                font.bold: true
+        color: Theme.fieldBackground
-                color: Theme.panelBackground
-                visible: toggle.checked
-                verticalAlignment: Text.AlignVCenter
-                horizontalAlignment: Text.AlignHCenter
-            }
-        }
-
-        contentItem: Text {
-            text: toggle.text
-            color: Theme.headingColor
-            verticalAlignment: Text.AlignVCenter
-            leftPadding: toggle.indicator.width + toggle.spacing
-            font.pixelSize: toggle.font.pixelSize || 11
-        }
-    }
-
-    // ── READOUT ───────────────────────────────────────────────────────────
-    Label {
-        text: "READOUT"
-        color: Theme.bodyColor
-        font.pixelSize: 10
-        font.letterSpacing: 1.8
-        font.weight: Font.Medium
-        topPadding: 6
-        bottomPadding: 8
-    }
-
-    Rectangle {
-        Layout.fillWidth: true
-        implicitHeight: statsLayout.implicitHeight + 20
-        color: Theme.subtleSectionBackground
-        radius: Theme.radiusSm
         border.color: Theme.cardBorder
         border.width: 1
 
+        property alias text: badgeLabel.text
+        Label {
+            id: badgeLabel
+            anchors.centerIn: parent
+            color: Theme.bodyColor
+            font.pixelSize: Theme.font2xs
+            font.weight: Font.Medium
+        }
+    }
+
+    StreamControlPanel {
+        Layout.fillWidth: true
+        onExportRequested: function(filePath, extra) {
+            root.exportRequested(filePath, extra);
+        }
+    }
+
+    // ── READOUT ─────────────────────────────────────────────────────
+    PanelBox {
+        Layout.fillWidth: true
+        Layout.preferredHeight: readoutCol.implicitHeight + 24
+
         ColumnLayout {
-            id: statsLayout
+            id: readoutCol
-            anchors { fill: parent; margins: 10 }
+            anchors.fill: parent
+            anchors.margins: 12
             spacing: 8
 
-            // Min Temp Row
+            SectionTitle { text: "READOUT" }
-            RowLayout {
+
+            ReadoutStat {
+                label: "Min Temp"
+                value: s.min !== undefined
+                    ? s.min + ((s.minIndex !== undefined && s.minIndex >= 0) ? "  #" + s.minIndex : "")
+                    : "—"
+                valueColor: Theme.sensorLow
+            }
+            ReadoutStat {
+                label: "Max Temp"
+                value: s.max !== undefined
+                    ? s.max + ((s.maxIndex !== undefined && s.maxIndex >= 0) ? "  #" + s.maxIndex : "")
+                    : "—"
+                valueColor: Theme.sensorHigh
+            }
+            ReadoutStat {
+                label: "Diff"
+                value: s.diff !== undefined ? s.diff : "—"
+                valueColor: Theme.diffAccent
+            }
+            ReadoutStat {
+                label: "Average"
+                value: s.avg !== undefined ? s.avg : "—"
+            }
+            ReadoutStat {
+                label: "Sigma (Σ)"
+                value: s.sigma !== undefined ? s.sigma : "—"
+            }
+            ReadoutStat {
+                label: "3Σ Value"
+                value: s.threeSigma !== undefined ? s.threeSigma : "—"
+            }
+            ReadoutStat {
+                visible: s.ecMinDelta !== undefined
+                label: "E-C Δ Min"
+                value: s.ecMinDelta !== undefined
+                    ? s.ecMinDelta.toFixed(2) + " (#" + s.ecMinEdgeIndex + "→#" + s.ecMinCenterIndex + ")"
+                    : "—"
+            }
+            ReadoutStat {
+                visible: s.ecMaxDelta !== undefined
+                label: "E-C Δ Max"
+                value: s.ecMaxDelta !== undefined
+                    ? s.ecMaxDelta.toFixed(2) + " (#" + s.ecMaxEdgeIndex + "→#" + s.ecMaxCenterIndex + ")"
+                    : "—"
+            }
+        }
+    }
+
+    // ── DISPLAY ─────────────────────────────────────────────────────
+    PanelBox {
         Layout.fillWidth: true
-                Label { text: "Min Temp"; color: Theme.bodyColor; font.pixelSize: 11 }
+        Layout.preferredHeight: displayCard.implicitHeight + 24
-                Item { Layout.fillWidth: true }
-                RowLayout {
-                    spacing: 4
-                    Label {
-                        text: s.min !== undefined ? s.min : "—"
-                        color: Theme.sensorLow
-                        font.pixelSize: 13; font.weight: Font.Bold
-                    }
-                    Label {
-                        text: s.minIndex !== undefined ? "#" + s.minIndex : ""
-                        color: Theme.bodyColor
-                        font.pixelSize: 10
-                    }
-                }
-            }
 
-            // Max Temp Row
+        ColumnLayout {
-            RowLayout {
+            id: displayCard
-                Layout.fillWidth: true
+            anchors.fill: parent
-                Label { text: "Max Temp"; color: Theme.bodyColor; font.pixelSize: 11 }
+            anchors.margins: 12
-                Item { Layout.fillWidth: true }
+            spacing: 8
-                RowLayout {
-                    spacing: 4
-                    Label {
-                        text: s.max !== undefined ? s.max : "—"
-                        color: Theme.sensorHigh
-                        font.pixelSize: 13; font.weight: Font.Bold
-                    }
-                    Label {
-                        text: s.maxIndex !== undefined ? "#" + s.maxIndex : ""
-                        color: Theme.bodyColor
-                        font.pixelSize: 10
-                    }
-                }
-            }
 
-            Rectangle { Layout.fillWidth: true; height: 1; color: Theme.cardBorder }
+            SectionTitle { text: "DISPLAY" }
-
-            // Differential Row
-            RowLayout {
-                Layout.fillWidth: true
-                Label { text: "Differential"; color: Theme.bodyColor; font.pixelSize: 11 }
-                Item { Layout.fillWidth: true }
-                Label {
-                    text: s.diff !== undefined ? s.diff : "—"
-                    color: Theme.headingColor
-                    font.pixelSize: 13; font.weight: Font.Bold
-                }
-            }
-
-            // Average Row
-            RowLayout {
-                Layout.fillWidth: true
-                Label { text: "Average"; color: Theme.bodyColor; font.pixelSize: 11 }
-                Item { Layout.fillWidth: true }
-                Label {
-                    text: s.avg !== undefined ? s.avg : "—"
-                    color: Theme.headingColor
-                    font.pixelSize: 13; font.weight: Font.Bold
-                }
-            }
-
-            Rectangle { Layout.fillWidth: true; height: 1; color: Theme.cardBorder }
-
-            // Sigma Row
-            RowLayout {
-                Layout.fillWidth: true
-                Label { text: "Sigma (σ)"; color: Theme.bodyColor; font.pixelSize: 11 }
-                Item { Layout.fillWidth: true }
-                Label {
-                    text: s.sigma !== undefined ? s.sigma : "—"
-                    color: Theme.headingColor
-                    font.pixelSize: 13; font.weight: Font.Bold
-                }
-            }
-
-            // 3-Sigma Row
-            RowLayout {
-                Layout.fillWidth: true
-                Label { text: "3σ Value"; color: Theme.bodyColor; font.pixelSize: 11 }
-                Item { Layout.fillWidth: true }
-                Label {
-                    text: s.threeSigma !== undefined ? s.threeSigma : "—"
-                    color: Theme.bodyColor
-                    font.pixelSize: 12; font.weight: Font.Medium
-                }
-            }
-        }
-    }
-
-    Item { height: 12 }
-    Rectangle { Layout.fillWidth: true; height: 1; color: Theme.cardBorder }
-    Item { height: 12 }
-
-    // ── DISPLAY ───────────────────────────────────────────────────────────
-    Label {
-        text: "DISPLAY"
-        color: Theme.bodyColor
-        font.pixelSize: 10
-        font.letterSpacing: 1.8
-        font.weight: Font.Medium
-        topPadding: 6
-        bottomPadding: 8
-    }
 
             PanelCheckBox {
                 id: thicknessToggle
                 text: "Show Thickness"
                 checked: false
-        font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
-        onCheckedChanged: waferMapItem.showThickness = checked
+                // First check with no data prompts for the customer CSV;
+                // unchecking only hides the overlay, data stays loaded.
+                onToggled: {
+                    if (checked && !root.hasThicknessData)
+                        thicknessDialog.open();
+                }
+            }
+
+            FileDialog {
+                id: thicknessDialog
+                title: "Select Thickness Data File"
+                nameFilters: ["CSV files (*.csv)"]
+                onAccepted: root.thicknessFileChosen(String(selectedFile).replace(/^file:\/\//, ""))
+                onRejected: thicknessToggle.checked = false
             }
 
             PanelCheckBox {
                 id: labelsToggle
                 text: "Labels"
                 checked: true
-        font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
+            }
+
+            PanelCheckBox {
+                id: extremesToggle
+                text: "Highlight Min/Max"
+                checked: true
+                font.pixelSize: Theme.fontSm
             }
 
             PanelCheckBox {
                 id: clusterAverageToggle
                 text: "Average Clusters"
                 checked: streamController.clusterAveragingEnabled
-        font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
                 onCheckedChanged: streamController.clusterAveragingEnabled = checked
             }
 
+            Rectangle {
+                Layout.fillWidth: true
+                height: 1
+                color: Theme.cardBorder
+            }
+
             RowLayout {
                 Layout.fillWidth: true
                 spacing: 6
                 Label {
                     text: "Heatmap"
                     color: Theme.bodyColor
-            font.pixelSize: 11
+                    font.pixelSize: Theme.fontSm
                     Layout.preferredWidth: 52
                 }
-        Slider {
+                PanelSlider {
                     id: heatmapSlider
-            from: 0; to: 1; value: 0
+                    from: 0
+                    to: 1
+                    value: 0
                     Layout.fillWidth: true
-            ToolTip.visible: hovered
+
-            ToolTip.text: Math.round(value * 100) + "%"
+                    AppToolTip {
+                        visible: heatmapSlider.hovered
+                        text: Math.round(heatmapSlider.value * 100) + "%"
                     }
                 }
-
-    Item { height: 12 }
-    Rectangle { Layout.fillWidth: true; height: 1; color: Theme.cardBorder }
-    Item { height: 12 }
-
-    // ── THRESHOLDS ────────────────────────────────────────────────────────
                 Label {
-        text: "THRESHOLDS"
+                    text: Math.round(heatmapSlider.value * 100) + "%"
                     color: Theme.bodyColor
-        font.pixelSize: 10
+                    font.pixelSize: Theme.fontSm
-        font.letterSpacing: 1.8
                     font.weight: Font.Medium
-        topPadding: 6
+                    Layout.preferredWidth: 32
-        bottomPadding: 8
+                    horizontalAlignment: Text.AlignRight
                 }
+            }
+        }
+    }
+
+    // ── THRESHOLDS ──────────────────────────────────────────────────
+    PanelBox {
+        Layout.fillWidth: true
+        Layout.preferredHeight: thresholdCard.implicitHeight + 24
+
+        ColumnLayout {
+            id: thresholdCard
+            anchors.fill: parent
+            anchors.margins: 12
+            spacing: 6
+
+            SectionTitle { text: "THRESHOLDS" }
 
             Label {
                 text: "Set Point (°C)"
                 color: Theme.bodyColor
-        font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
-        bottomPadding: 3
             }
             TextField {
                 id: spField
                 Layout.fillWidth: true
                 text: "149.0"
-        font.pixelSize: 12
+                font.pixelSize: Theme.fontSm
                 inputMethodHints: Qt.ImhFormattedNumbersOnly
                 color: Theme.fieldText
                 placeholderTextColor: Theme.fieldPlaceholder
@@ -252,23 +236,26 @@ ColumnLayout {
                     color: Theme.fieldBackground
                     border.width: spField.activeFocus ? Theme.borderStrong : Theme.borderThin
                     border.color: spField.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+                    Behavior on color {
+                        ColorAnimation { duration: Theme.durationFast }
+                    }
+                    Behavior on border.color {
+                        ColorAnimation { duration: Theme.durationFast }
+                    }
                 }
                 onEditingFinished: pushThresholds()
             }
 
-    Item { height: 10 }
-
             Label {
                 text: "Margin (±°C)"
                 color: Theme.bodyColor
-        font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
-        bottomPadding: 3
             }
             TextField {
                 id: mgField
                 Layout.fillWidth: true
                 text: "1.0"
-        font.pixelSize: 12
+                font.pixelSize: Theme.fontSm
                 inputMethodHints: Qt.ImhFormattedNumbersOnly
                 color: Theme.fieldText
                 placeholderTextColor: Theme.fieldPlaceholder
@@ -279,25 +266,33 @@ ColumnLayout {
                     color: Theme.fieldBackground
                     border.width: mgField.activeFocus ? Theme.borderStrong : Theme.borderThin
                     border.color: mgField.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+                    Behavior on color {
+                        ColorAnimation { duration: Theme.durationFast }
+                    }
+                    Behavior on border.color {
+                        ColorAnimation { duration: Theme.durationFast }
+                    }
                 }
                 onEditingFinished: pushThresholds()
             }
 
-    Item { height: 10 }
-
             PanelCheckBox {
                 id: autoCheck
                 text: "Auto range  (mean ± 1σ)"
                 checked: true
-        font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
                 onCheckedChanged: pushThresholds()
             }
+        }
+    }
 
-    Item { Layout.fillHeight: true }
+    Item {
+        Layout.fillHeight: true
+    }
 
     function pushThresholds() {
-        var sp = parseFloat(spField.text) || 149.0
+        var sp = parseFloat(spField.text) || 149.0;
-        var mg = parseFloat(mgField.text) || 1.0
+        var mg = parseFloat(mgField.text) || 1.0;
-        streamController.setThresholds(sp, mg, autoCheck.checked)
+        streamController.setThresholds(sp, mg, autoCheck.checked);
     }
 }

src/pygui/ISC/Tabs/components/ReadoutStat.qml

@@ -0,0 +1,39 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Layouts
+import ISC
+
+// Small labeled value tile — DTW readout panel, scrubber readout, and any
+// other compact label/value stat display share this one shape.
+Rectangle {
+    id: readoutStat
+    property string label
+    property string value
+    property color valueColor: Theme.headingColor
+    Layout.fillWidth: true
+    implicitHeight: 52
+    radius: Theme.radiusSm
+    color: Theme.subtleSectionBackground
+    border.color: Theme.cardBorder
+    border.width: 1
+
+    ColumnLayout {
+        anchors.fill: parent
+        anchors.margins: 8
+        spacing: 2
+        Label {
+            text: readoutStat.label.toUpperCase()
+            font.pixelSize: Theme.fontXs
+            font.bold: true
+            font.letterSpacing: 0.2
+            color: Theme.sideMutedText
+        }
+        Label {
+            text: readoutStat.value
+            font.pixelSize: Theme.fontLg
+            font.bold: true
+            font.family: Theme.codeFontFamily
+            color: readoutStat.valueColor
+        }
+    }
+}

src/pygui/ISC/Tabs/components/ReplaceSensorDialog.qml

@@ -10,6 +10,10 @@ Dialog {
     standardButtons: Dialog.NoButton
     width: 300
 
+    // Anchor to the top-left of the window instead of the default centered position.
+    x: 24
+    y: 24
+
     // called by WaferMapView's TapHandler
     property int sensorIndex: -1
     property string sensorLabel: ""
@@ -17,14 +21,15 @@ Dialog {
     property bool hasOverride: streamController.overriddenSensors.indexOf(sensorIndex) >= 0
 
     function openFor(index) {
-        sensorIndex = index
+        sensorIndex = index;
-        var dot = streamController.sensorDots[index]
+        var dot = streamController.sensorDots[index];
-        if (!dot) return
+        if (!dot)
-        sensorLabel = dot.label !== undefined ? String(dot.label) : String(index + 1)
+            return;
-        currentValue = dot.value
+        sensorLabel = dot.label !== undefined ? String(dot.label) : String(index + 1);
-        valueField.text = ""
+        currentValue = dot.value;
-        offsetField.text = ""
+        valueField.text = "";
-        open()
+        offsetField.text = "";
+        open();
     }
 
     background: Rectangle {
@@ -42,11 +47,10 @@ Dialog {
         RowLayout {
             Layout.fillWidth: true
             Label {
-                text: "Sensor #" + (root.sensorIndex + 1) +
+                text: "Sensor #" + (root.sensorIndex + 1) + (root.sensorLabel ? "  (" + root.sensorLabel + ")" : "")
-                      (root.sensorLabel ? "  (" + root.sensorLabel + ")" : "")
                 color: Theme.headingColor
                 font.bold: true
-                font.pixelSize: 13
+                font.pixelSize: Theme.fontSm
                 Layout.fillWidth: true
             }
             Rectangle {
@@ -60,8 +64,8 @@ Dialog {
                     id: overrideTag
                     anchors.centerIn: parent
                     text: "OVERRIDE"
-                    color: "white"
+                    color: Theme.statusBadgeText
-                    font.pixelSize: 10
+                    font.pixelSize: Theme.fontXs
                     font.bold: true
                     font.letterSpacing: 1
                 }
@@ -71,13 +75,21 @@ Dialog {
         Label {
             text: "Live: " + root.currentValue.toFixed(2)
             color: Theme.bodyColor
-            font.pixelSize: 12
+            font.pixelSize: Theme.fontSm
         }
 
-        Rectangle { Layout.fillWidth: true; height: 1; color: Theme.cardBorder }
+        Rectangle {
+            Layout.fillWidth: true
+            height: 1
+            color: Theme.cardBorder
+        }
 
         // ── replace field ─────────────────────────────────────────
-        Label { text: "Replace with value"; color: Theme.bodyColor; font.pixelSize: 11 }
+        Label {
+            text: "Replace with value"
+            color: Theme.bodyColor
+            font.pixelSize: Theme.fontXs
+        }
         TextField {
             id: valueField
             Layout.fillWidth: true
@@ -92,11 +104,21 @@ Dialog {
                 color: Theme.fieldBackground
                 border.width: valueField.activeFocus ? Theme.borderStrong : Theme.borderThin
                 border.color: valueField.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+                Behavior on color {
+                    ColorAnimation { duration: Theme.durationFast }
+                }
+                Behavior on border.color {
+                    ColorAnimation { duration: Theme.durationFast }
+                }
             }
         }
 
         // ── offset field ──────────────────────────────────────────
-        Label { text: "Or add offset (± delta)"; color: Theme.bodyColor; font.pixelSize: 11 }
+        Label {
+            text: "Or add offset (± delta)"
+            color: Theme.bodyColor
+            font.pixelSize: Theme.fontXs
+        }
         TextField {
             id: offsetField
             Layout.fillWidth: true
@@ -111,10 +133,20 @@ Dialog {
                 color: Theme.fieldBackground
                 border.width: offsetField.activeFocus ? Theme.borderStrong : Theme.borderThin
                 border.color: offsetField.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+                Behavior on color {
+                    ColorAnimation { duration: Theme.durationFast }
+                }
+                Behavior on border.color {
+                    ColorAnimation { duration: Theme.durationFast }
+                }
             }
         }
 
-        Rectangle { Layout.fillWidth: true; height: 1; color: Theme.cardBorder }
+        Rectangle {
+            Layout.fillWidth: true
+            height: 1
+            color: Theme.cardBorder
+        }
 
         // ── buttons ───────────────────────────────────────────────
         RowLayout {
@@ -140,20 +172,20 @@ Dialog {
                     horizontalAlignment: Text.AlignHCenter
                     verticalAlignment: Text.AlignVCenter
                     font.bold: true
-                    font.pixelSize: 13
+                    font.pixelSize: Theme.fontSm
                 }
                 onClicked: {
                     if (valueField.text !== "") {
-                        var v = parseFloat(valueField.text)
+                        var v = parseFloat(valueField.text);
                         if (!isNaN(v))
-                            streamController.replaceSensor(root.sensorIndex, v)
+                            streamController.replaceSensor(root.sensorIndex, v);
                     }
                     if (offsetField.text !== "") {
-                        var d = parseFloat(offsetField.text)
+                        var d = parseFloat(offsetField.text);
                         if (!isNaN(d))
-                            streamController.offsetSensor(root.sensorIndex, d)
+                            streamController.offsetSensor(root.sensorIndex, d);
                     }
-                    root.close()
+                    root.close();
                 }
             }
             Button {
@@ -175,11 +207,11 @@ Dialog {
                     horizontalAlignment: Text.AlignHCenter
                     verticalAlignment: Text.AlignVCenter
                     font.bold: true
-                    font.pixelSize: 13
+                    font.pixelSize: Theme.fontSm
                 }
                 onClicked: {
-                    streamController.clearSensorEdit(root.sensorIndex)
+                    streamController.clearSensorEdit(root.sensorIndex);
-                    root.close()
+                    root.close();
                 }
             }
             Button {
@@ -198,7 +230,7 @@ Dialog {
                     horizontalAlignment: Text.AlignHCenter
                     verticalAlignment: Text.AlignVCenter
                     font.bold: true
-                    font.pixelSize: 13
+                    font.pixelSize: Theme.fontSm
                 }
                 onClicked: root.close()
             }

src/pygui/ISC/Tabs/components/RunChart.qml

@@ -0,0 +1,135 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Layouts
+import ISC
+import ISC.Wafer
+
+// ===== Run Chart =====
+// Zoomable whole-run multi-sensor chart (C# parity: PopupChartForm.cs).
+// Lives in the Graph tab. Mouse wheel zooms around the cursor, drag pans;
+// the strip below shows the aggregate min/max/avg over the *visible* range
+// (not the whole run), matching PopupChartForm's recalc_stats. Cursor/
+// playhead tracking is out of scope — see specs/plans/2026-07-10-popup-chart.md
+// and docs/adr/0004-graphquickitem-viewport-for-replay-chart.md.
+Item {
+    id: root
+
+    property alias sensorNames: chart.sensorNames
+    property alias seriesData: chart.seriesData
+    property alias title: chart.title
+
+    ColumnLayout {
+        anchors.fill: parent
+        spacing: 8
+
+        Item {
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+
+            GraphQuickItem {
+                id: chart
+                anchors.fill: parent
+                showMinMaxMarkers: true
+                xLabel: "Measurement Interval"
+                yLabel: "Temperature (°C)"
+            }
+
+            MouseArea {
+                id: interaction
+                anchors.fill: parent
+                acceptedButtons: Qt.LeftButton
+                property real lastX: 0
+
+                onWheel: function(wheel) {
+                    var frac = Math.max(0, Math.min(1, wheel.x / width));
+                    var factor = wheel.angleDelta.y > 0 ? 0.8 : 1.25;
+                    chart.zoomAtFraction(frac, factor);
+                    wheel.accepted = true;
+                }
+                onPressed: function(mouse) {
+                    lastX = mouse.x;
+                }
+                onPositionChanged: function(mouse) {
+                    if (pressed && width > 0) {
+                        chart.panByFraction(-(mouse.x - lastX) / width);
+                        lastX = mouse.x;
+                    }
+                }
+            }
+        }
+
+        // ── Min/Max/Avg readout strip + Reset Zoom ─────────────────────
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 16
+
+            Label {
+                text: "Min:"
+                color: Theme.sensorLow
+                font.family: Theme.uiFontFamily
+                font.pixelSize: Theme.fontSm
+                font.weight: Font.Medium
+            }
+            Label {
+                text: chart.viewMin.toFixed(2) + (chart.viewMinSensor ? "  (" + chart.viewMinSensor + ")" : "")
+                color: Theme.headingColor
+                font.family: Theme.codeFontFamily
+                font.pixelSize: Theme.fontSm
+            }
+
+            Label {
+                text: "Max:"
+                color: Theme.sensorHigh
+                font.family: Theme.uiFontFamily
+                font.pixelSize: Theme.fontSm
+                font.weight: Font.Medium
+            }
+            Label {
+                text: chart.viewMax.toFixed(2) + (chart.viewMaxSensor ? "  (" + chart.viewMaxSensor + ")" : "")
+                color: Theme.headingColor
+                font.family: Theme.codeFontFamily
+                font.pixelSize: Theme.fontSm
+            }
+
+            Label {
+                text: "Avg:"
+                color: Theme.sideMutedText
+                font.family: Theme.uiFontFamily
+                font.pixelSize: Theme.fontSm
+                font.weight: Font.Medium
+            }
+            Label {
+                text: chart.viewAvg.toFixed(2)
+                color: Theme.headingColor
+                font.family: Theme.codeFontFamily
+                font.pixelSize: Theme.fontSm
+            }
+
+            Item { Layout.fillWidth: true }
+
+            Button {
+                id: resetZoomBtn
+                implicitHeight: 32
+                hoverEnabled: true
+                text: "Reset Zoom"
+                font.family: Theme.uiFontFamily
+                font.pixelSize: Theme.fontSm
+                font.weight: Font.Medium
+                background: Rectangle {
+                    radius: Theme.radiusSm
+                    color: resetZoomBtn.pressed ? Theme.transportButtonHover : Theme.transportButtonBg
+                    border.color: Theme.sideBorder
+                    border.width: 1
+                }
+                contentItem: Text {
+                    text: resetZoomBtn.text
+                    color: Theme.headingColor
+                    font: resetZoomBtn.font
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
+                }
+                onClicked: chart.resetZoom()
+            }
+        }
+    }
+}

src/pygui/ISC/Tabs/components/SectionTitle.qml

@@ -0,0 +1,12 @@
+import QtQuick
+import QtQuick.Controls
+import ISC
+
+// Uppercase card heading — shared by the Data tab cards.
+Label {
+    font.family: Theme.uiFontFamily
+    font.pixelSize: Theme.fontSm
+    font.letterSpacing: 1.5
+    font.bold: true
+    color: Theme.sideMutedText
+}

src/pygui/ISC/Tabs/components/SelectFileDialog.qml

@@ -1,5 +1,6 @@
 import QtQuick
 import QtQuick.Controls
+import QtQuick.Controls.impl
 import QtQuick.Layouts
 import Qt.labs.qmlmodels
 import ISC
@@ -24,9 +25,11 @@ Dialog {
     property int selectedRow: -1
     property int metadataEditRow: -1
     readonly property string masterTypeFieldText: {
-        if (metadataEditRow < 0) return "";
+        if (metadataEditRow < 0)
+            return "";
         const rec = tableModel[metadataEditRow];
-        if (!rec) return "";
+        if (!rec)
+            return "";
         return rec.masterType ?? "";
     }
 
@@ -113,7 +116,7 @@ Dialog {
             verticalAlignment: Text.AlignVCenter
             elide: Text.ElideRight
             font.bold: true
-            font.pixelSize: 13
+            font.pixelSize: Theme.fontSm
         }
     }
 
@@ -129,6 +132,12 @@ Dialog {
             color: Theme.fieldBackground
             border.width: dialogTextInput.activeFocus ? Theme.borderStrong : Theme.borderThin
             border.color: dialogTextInput.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+            Behavior on color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
+            Behavior on border.color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
         }
     }
 
@@ -163,7 +172,7 @@ Dialog {
             anchors.left: parent.left
             anchors.leftMargin: 16
             text: root.title
-            font.pixelSize: 15
+            font.pixelSize: Theme.fontLg
             font.bold: true
             color: Theme.headingColor
         }
@@ -173,10 +182,17 @@ Dialog {
             anchors.verticalCenter: parent.verticalCenter
             anchors.right: parent.right
             anchors.rightMargin: 12
-            text: "✕"
             implicitWidth: 32
             implicitHeight: 32
             onClicked: root.close()
+            contentItem: IconImage {
+                source: "../icons/x.svg"
+                width: 14; height: 14
+                sourceSize.width: 14
+                sourceSize.height: 14
+                color: Theme.buttonNeutralText
+                anchors.centerIn: parent
+            }
         }
     }
 
@@ -221,7 +237,7 @@ Dialog {
                     text: file_browser.currentDirectory
                     color: Theme.fieldText
                     elide: Text.ElideMiddle
-                    font.pixelSize: 13
+                    font.pixelSize: Theme.fontSm
                 }
             }
         }
@@ -242,7 +258,7 @@ Dialog {
                     anchors.centerIn: parent
                     text: root.headerTitles[index] ?? ""
                     font.bold: true
-                    font.pixelSize: 12
+                    font.pixelSize: Theme.fontSm
                     color: Theme.headingColor
                 }
             }
@@ -329,7 +345,7 @@ Dialog {
                             const mt = root.normalizedRows[row]?.masterType ?? "";
                             return mt || "—";
                         }
-                        font.pixelSize: 14
+                        font.pixelSize: Theme.fontMd
                         font.bold: true
                         color: {
                             const mt = root.normalizedRows[row]?.masterType ?? "";
@@ -346,7 +362,7 @@ Dialog {
                     sourceComponent: Button {
                         hoverEnabled: true
                         text: "Edit…"
-                        font.pixelSize: 12
+                        font.pixelSize: Theme.fontSm
                         onClicked: root.openMetadataEditor(row)
 
                         background: Rectangle {
@@ -361,7 +377,7 @@ Dialog {
                             color: Theme.buttonNeutralText
                             horizontalAlignment: Text.AlignHCenter
                             verticalAlignment: Text.AlignVCenter
-                            font.pixelSize: 12
+                            font.pixelSize: Theme.fontSm
                         }
                     }
                 }
@@ -388,7 +404,7 @@ Dialog {
                             return "";
                         }
                         elide: Text.ElideRight
-                        font.pixelSize: 13
+                        font.pixelSize: Theme.fontSm
                         color: Theme.bodyColor
                     }
                 }
@@ -409,7 +425,7 @@ Dialog {
                             return record.notes ?? "";
                         }
                         elide: Text.ElideRight
-                        font.pixelSize: 13
+                        font.pixelSize: Theme.fontSm
                         color: Theme.bodyColor
                     }
                 }
@@ -456,7 +472,7 @@ Dialog {
                     verticalAlignment: Text.AlignVCenter
                     text: root.selectedPath
                     elide: Text.ElideLeft
-                    font.pixelSize: 13
+                    font.pixelSize: Theme.fontSm
                     color: root.selectedPath ? Theme.fieldText : Theme.fieldPlaceholder
                 }
             }
@@ -504,7 +520,7 @@ Dialog {
                 anchors.left: parent.left
                 anchors.leftMargin: 16
                 text: metadataEditDialog.title
-                font.pixelSize: 15
+                font.pixelSize: Theme.fontLg
                 font.bold: true
                 color: Theme.headingColor
             }
@@ -530,7 +546,7 @@ Dialog {
                 maximumLineCount: 3
                 elide: Text.ElideRight
                 color: Theme.bodyColor
-                font.pixelSize: 12
+                font.pixelSize: Theme.fontSm
             }
 
             Label {

src/pygui/ISC/Tabs/components/SourcePanel.qml

@@ -1,6 +1,7 @@
 import QtQuick
 import QtQuick.Controls
 import QtQuick.Layouts
+import QtQuick.Controls.impl
 import ISC
 import ".."
 
@@ -14,10 +15,11 @@ ColumnLayout {
 
         Label {
             text: "SOURCE"
-            color: Theme.bodyColor
+            color: Theme.sideMutedText
-            font.pixelSize: 10
+            font.family: Theme.uiFontFamily
-            font.letterSpacing: 1.8
+            font.pixelSize: Theme.fontSm
-            font.weight: Font.Medium
+            font.letterSpacing: 1.5
+            font.bold: true
             topPadding: 6
             bottomPadding: 8
             Layout.fillWidth: true
@@ -26,51 +28,51 @@ ColumnLayout {
 
         Button {
             id: editBtn
-            text: "✎"
+            implicitWidth: 28
-            implicitWidth: 26
+            implicitHeight: 28
-            implicitHeight: 26
             hoverEnabled: true
-            font.pixelSize: 14
             background: Rectangle {
-                color: editBtn.pressed ? Theme.buttonPressed
+                color: editBtn.pressed ? Theme.buttonPressed : editBtn.hovered ? Theme.buttonNeutralHover : "transparent"
-                     : editBtn.hovered ? Theme.buttonNeutralHover
-                     : "transparent"
                 radius: Theme.radiusSm
             }
-            contentItem: Text {
+            contentItem: IconImage {
-                text: parent.text
+                source: "../icons/edit.svg"
+                sourceSize.width: 16
+                sourceSize.height: 16
                 color: Theme.bodyColor
-                font: parent.font
-                horizontalAlignment: Text.AlignHCenter
-                verticalAlignment: Text.AlignVCenter
             }
             onClicked: {
-                file_browser.refreshFiles()
+                file_browser.refreshFiles();
-                csvEditorDialog.open()
+                csvEditorDialog.open();
+            }
+
+            AppToolTip {
+                visible: editBtn.hovered
+                text: "Edit"
             }
         }
 
         Button {
             id: refreshBtn
-            text: "⟳"
+            implicitWidth: 28
-            implicitWidth: 26
+            implicitHeight: 28
-            implicitHeight: 26
             hoverEnabled: true
-            font.pixelSize: 14
             background: Rectangle {
-                color: refreshBtn.pressed ? Theme.buttonPressed
+                color: refreshBtn.pressed ? Theme.buttonPressed : refreshBtn.hovered ? Theme.buttonNeutralHover : "transparent"
-                     : refreshBtn.hovered ? Theme.buttonNeutralHover
-                     : "transparent"
                 radius: Theme.radiusSm
             }
-            contentItem: Text {
+            contentItem: IconImage {
-                text: parent.text
+                source: "../icons/refresh.svg"
+                sourceSize.width: 16
+                sourceSize.height: 16
                 color: Theme.bodyColor
-                font: parent.font
-                horizontalAlignment: Text.AlignHCenter
-                verticalAlignment: Text.AlignVCenter
             }
             onClicked: file_browser.refreshFiles()
+
+            AppToolTip {
+                visible: refreshBtn.hovered
+                text: "Refresh"
+            }
         }
     }
 
@@ -79,28 +81,28 @@ ColumnLayout {
         id: dirBtn
         Layout.fillWidth: true
         hoverEnabled: true
-        implicitHeight: 32
+        implicitHeight: 36
         leftPadding: 8
         rightPadding: 8
         background: Rectangle {
             radius: Theme.radiusSm
-            color: dirBtn.pressed ? Theme.buttonNeutralPressed
+            color: dirBtn.pressed ? Theme.buttonNeutralPressed : dirBtn.hovered ? Theme.buttonNeutralHover : Theme.buttonNeutralBackground
-                 : dirBtn.hovered ? Theme.buttonNeutralHover
-                 : Theme.buttonNeutralBackground
             border.width: Theme.borderThin
             border.color: Theme.fieldBorder
         }
         contentItem: RowLayout {
             spacing: 6
-            Label {
+            IconImage {
-                text: "▤"
+                source: "../icons/folder.svg"
+                width: 14; height: 14
+                sourceSize.width: 14
+                sourceSize.height: 14
                 color: Theme.bodyColor
-                font.pixelSize: 12
             }
             Label {
                 text: file_browser.currentDirectory.split("/").pop() || file_browser.currentDirectory
                 color: Theme.headingColor
-                font.pixelSize: 11
+                font.pixelSize: Theme.fontSm
                 elide: Text.ElideMiddle
                 Layout.fillWidth: true
             }
@@ -113,7 +115,7 @@ ColumnLayout {
         id: filter
         Layout.fillWidth: true
         placeholderText: "Filter…"
-        font.pixelSize: 11
+        font.pixelSize: Theme.fontSm
         color: Theme.fieldText
         placeholderTextColor: Theme.fieldPlaceholder
         selectedTextColor: Theme.fieldBackground
@@ -123,6 +125,12 @@ ColumnLayout {
             color: Theme.fieldBackground
             border.width: filter.activeFocus ? Theme.borderStrong : Theme.borderThin
             border.color: filter.activeFocus ? Theme.fieldBorderFocus : Theme.fieldBorder
+            Behavior on color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
+            Behavior on border.color {
+                ColorAnimation { duration: Theme.durationFast }
+            }
         }
     }
 
@@ -146,28 +154,62 @@ ColumnLayout {
             focusPolicy: Qt.NoFocus
 
             readonly property bool matchesFilter: {
-                if (filter.text === "") return true
+                if (filter.text === "")
-                var q = filter.text.toLowerCase()
+                    return true;
-                return (modelData.baseName + modelData.waferType + modelData.date)
+                var q = filter.text.toLowerCase();
-                       .toLowerCase().indexOf(q) >= 0
+                return (modelData.baseName + modelData.waferType + modelData.date).toLowerCase().indexOf(q) >= 0;
             }
 
-            // Active only in review mode; no highlight during live streaming
+            readonly property var dataTab: {
-            readonly property bool isActive:
+                try {
-                streamController.mode === "review" &&
+                    return (root.selectedTabIndex === 1 && dataTabLoader.item) ? dataTabLoader.item : null;
-                streamController.loadedFile !== "" &&
+                } catch (e) { return null; }
-                modelData.fileName === streamController.loadedFile
+            }
+
+            // Run A's effective file: the master file when "Compare vs Master
+            // File" is toggled on, otherwise the manually selected file.
+            readonly property string effectiveRunAFile: fileItem.dataTab
+                ? (fileItem.dataTab.useMasterFile ? fileItem.dataTab.masterFileForRunB : fileItem.dataTab.compareFileA)
+                : ""
+            readonly property bool isRunA: fileItem.dataTab !== null
+                && fileItem.effectiveRunAFile !== "" && modelData.fileName === fileItem.effectiveRunAFile
+            readonly property bool isRunB: fileItem.dataTab !== null
+                && modelData.fileName === fileItem.dataTab.compareFileB
+
+            // Active highlight logic: on Data tab, highlight the Run A/Run B files (or the
+            // resolved master file standing in for Run A); otherwise highlight loadedFile (Map tab).
+            readonly property bool isActive: fileItem.dataTab !== null
+                ? (fileItem.isRunA || fileItem.isRunB)
+                : (streamController.mode === "review" && streamController.loadedFile !== "" && modelData.fileName === streamController.loadedFile)
+
+            // A file registered as any family's master in Settings → Master Files.
+            readonly property bool isMasterFile: {
+                var m = settingsModel.masters
+                for (var fam in m) {
+                    if (m[fam] && m[fam] === modelData.fileName) return true
+                }
+                return false
+            }
+
+            readonly property bool isLiveFile: (modelData.baseName || "").toLowerCase().indexOf("live") >= 0
+            readonly property bool liveFileBlocked: root.selectedTabIndex === 1 && isLiveFile
 
             visible: matchesFilter
             height: matchesFilter ? implicitHeight : 0
+            enabled: !liveFileBlocked
+            opacity: liveFileBlocked ? 0.45 : 1.0
+            Behavior on opacity {
+                NumberAnimation { duration: Theme.durationFast }
+            }
 
             onClicked: streamController.loadFile(modelData.fileName)
 
             background: Rectangle {
-                color: fileItem.isActive
+                color: fileItem.isActive ? Theme.listActiveBackground : fileItem.hovered ? Theme.listHoverBackground : "transparent"
-                    ? Qt.rgba(1, 1, 1, 0.06)
-                    : fileItem.hovered ? Qt.rgba(1, 1, 1, 0.04) : "transparent"
                 radius: Theme.radiusSm
+                Behavior on color {
+                    ColorAnimation { duration: Theme.durationFast }
+                }
 
                 // Left accent bar — shown only when active
                 Rectangle {
@@ -175,15 +217,23 @@ ColumnLayout {
                     width: 3
                     radius: 1.5
                     anchors {
-                        top: parent.top; bottom: parent.bottom; left: parent.left
+                        top: parent.top
-                        topMargin: 5; bottomMargin: 5
+                        bottom: parent.bottom
+                        left: parent.left
+                        topMargin: 5
+                        bottomMargin: 5
                     }
                     color: {
-                        var t = modelData.waferType
+                        if (fileItem.isRunA) return Theme.primaryAccent;
-                        if (t === "A" || t === "E" || t === "P") return "#3B82F6"
+                        if (fileItem.isRunB) return Theme.themeSkill;
-                        if (t === "B" || t === "C" || t === "D") return "#10B981"
+                        var t = modelData.waferType;
-                        if (t === "Z") return "#8B5CF6"
+                        if (t === "A" || t === "E" || t === "P")
-                        return Theme.headingColor
+                            return Theme.familyBlueAccent;
+                        if (t === "B" || t === "C" || t === "D")
+                            return Theme.familyGreenAccent;
+                        if (t === "Z")
+                            return Theme.familyVioletAccent;
+                        return Theme.headingColor;
                     }
                 }
             }
@@ -193,24 +243,55 @@ ColumnLayout {
 
                 // Wafer-type avatar (circle)
                 Rectangle {
-                    implicitWidth: 28; implicitHeight: 28
+                    implicitWidth: 28
+                    implicitHeight: 28
                     Layout.preferredWidth: 28
                     Layout.preferredHeight: 28
                     Layout.alignment: Qt.AlignVCenter
                     radius: 14
                     color: {
-                        var t = modelData.waferType
+                        var t = modelData.waferType;
-                        if (t === "A" || t === "E" || t === "P") return "#1D4ED8"
+                        if (t === "A" || t === "E" || t === "P")
-                        if (t === "B" || t === "C" || t === "D") return "#065F46"
+                            return Theme.familyBlueFill;
-                        if (t === "Z") return "#7C3AED"
+                        if (t === "B" || t === "C" || t === "D")
-                        return "#374151"
+                            return Theme.familyGreenFill;
+                        if (t === "Z")
+                            return Theme.familyVioletFill;
+                        return Theme.familyNeutralFill;
                     }
                     Label {
                         anchors.centerIn: parent
                         text: modelData.waferType || "?"
-                        font.pixelSize: 12
+                        font.pixelSize: Theme.fontMd
                         font.weight: Font.Bold
-                        color: "#FFFFFF"
+                        color: Theme.textOnColor
+                    }
+
+                    // Recording indicator dot — distinguishes a live-recorded CSV
+                    // (SessionController.startRecording) from a read-memory dump
+                    // (DeviceController.parseAndSaveData).
+                    Rectangle {
+                        visible: modelData.isRecording === true
+                        width: 10
+                        height: 10
+                        radius: 5
+                        color: Theme.recordColor
+                        border.color: Theme.subtleSectionBackground
+                        border.width: 1.5
+                        anchors.top: parent.top
+                        anchors.right: parent.right
+                        anchors.topMargin: -2
+                        anchors.rightMargin: -2
+                    }
+
+                    // Accent ring — this file is registered as a master (Settings → Master Files).
+                    Rectangle {
+                        visible: fileItem.isMasterFile
+                        anchors.fill: parent
+                        radius: parent.radius
+                        color: "transparent"
+                        border.color: Theme.primaryAccent
+                        border.width: 2
                     }
                 }
 
@@ -219,40 +300,83 @@ ColumnLayout {
                     spacing: 1
                     Layout.fillWidth: true
 
-                    // Primary: wafer type + serial number
+                    // Primary: wafer type + serial number, plus a REC badge for recordings
+                    RowLayout {
+                        Layout.fillWidth: true
+                        spacing: 6
+
                         Label {
                             text: modelData.serialNumber ? (modelData.waferType + modelData.serialNumber) : modelData.baseName
                             color: Theme.headingColor
-                        font.pixelSize: 13
+                            font.pixelSize: Theme.fontMd
                             font.weight: Font.Bold
                             elide: Text.ElideRight
                             Layout.fillWidth: true
                         }
 
+                        Rectangle {
+                            visible: modelData.isRecording === true
+                            radius: 4
+                            color: Qt.alpha(Theme.recordColor, 0.18)
+                            implicitWidth: recLabel.implicitWidth + 10
+                            implicitHeight: recLabel.implicitHeight + 4
+                            Layout.alignment: Qt.AlignVCenter
+
+                            Label {
+                                id: recLabel
+                                anchors.centerIn: parent
+                                text: "REC"
+                                color: Theme.recordColor
+                                font.pixelSize: Theme.font2xs
+                                font.bold: true
+                                font.letterSpacing: 0.6
+                            }
+                        }
+
+                        Rectangle {
+                            visible: fileItem.isMasterFile
+                            radius: 4
+                            color: Qt.alpha(Theme.primaryAccent, 0.18)
+                            implicitWidth: masterLabel.implicitWidth + 10
+                            implicitHeight: masterLabel.implicitHeight + 4
+                            Layout.alignment: Qt.AlignVCenter
+
+                            Label {
+                                id: masterLabel
+                                anchors.centerIn: parent
+                                text: "MASTER"
+                                color: Theme.primaryAccent
+                                font.pixelSize: Theme.font2xs
+                                font.bold: true
+                                font.letterSpacing: 0.6
+                            }
+                        }
+                    }
+
                     // Secondary: date · time
                     RowLayout {
                         spacing: 3
                         Layout.fillWidth: true
                         Label {
                             text: {
-                                var d = modelData.date || ""
+                                var d = modelData.date || "";
-                                return d.length >= 10 ? d.substring(0, 10) : (d || "—")
+                                return d.length >= 10 ? d.substring(0, 10) : (d || "—");
                             }
                             color: Theme.bodyColor
-                            font.pixelSize: 10
+                            font.pixelSize: Theme.fontSm
                         }
                         Label {
                             visible: (modelData.timeStr || "") !== ""
                             text: "·"
                             color: Theme.bodyColor
-                            font.pixelSize: 10
+                            font.pixelSize: Theme.fontSm
                             opacity: 0.45
                         }
                         Label {
                             visible: (modelData.timeStr || "") !== ""
                             text: modelData.timeStr || ""
                             color: Theme.bodyColor
-                            font.pixelSize: 10
+                            font.pixelSize: Theme.fontSm
                             opacity: 0.65
                         }
                     }
@@ -260,18 +384,20 @@ ColumnLayout {
                     // Tertiary: edited metadata (chamber · notes) if any
                     Label {
                         visible: {
-                            var c = modelData.chamber || ""
+                            var c = modelData.chamber || "";
-                            var n = modelData.notes || ""
+                            var n = modelData.notes || "";
-                            return c !== "" || n !== ""
+                            return c !== "" || n !== "";
                         }
                         text: {
-                            var parts = []
+                            var parts = [];
-                            if (modelData.chamber) parts.push(modelData.chamber)
+                            if (modelData.chamber)
-                            if (modelData.notes)   parts.push(modelData.notes)
+                                parts.push(modelData.chamber);
-                            return parts.join("  ·  ")
+                            if (modelData.notes)
+                                parts.push(modelData.notes);
+                            return parts.join("  ·  ");
                         }
                         color: Theme.bodyColor
-                        font.pixelSize: 9
+                        font.pixelSize: Theme.fontXs
                         opacity: 0.7
                         elide: Text.ElideRight
                         Layout.fillWidth: true
@@ -285,7 +411,7 @@ ColumnLayout {
     Label {
         text: file_browser.files.length + " files · CSV only"
         color: Theme.bodyColor
-        font.pixelSize: 10
+        font.pixelSize: Theme.fontSm
     }
 
     SelectFileDialog {

src/pygui/ISC/Tabs/components/SplitDialog.qml

@@ -0,0 +1,359 @@
+import QtQuick
+import QtQuick.Layouts
+import QtQuick.Controls
+import QtQuick.Dialogs
+import ISC
+
+// ===== Split Dialog (Threshold Segmentation) =====
+// Modal popup for segmenting temperature profile into Ramp/Soak/Cool phases.
+// Backend: splitter.segment_profile() returns list of DataSegment objects.
+
+Popup {
+    id: root
+    modal: true
+    dim: true
+    closePolicy: Popup.CloseOnEscape | Popup.CloseOnPressOutside
+    width: Math.min(parent.width - 100, 800)
+    height: Math.min(parent.height - 100, 600)
+    anchors.centerIn: Overlay.overlay
+
+    property real threshold: 40.0
+    property bool segmenting: false
+    property var segments: []
+    property string currentFile: streamController.loadedFile || ""
+
+    background: Rectangle {
+        radius: Theme.radiusMd
+        color: Theme.cardBackground
+        border.color: Theme.cardBorder
+        border.width: 1
+    }
+
+    ColumnLayout {
+        anchors.fill: parent
+        anchors.margins: 20
+        spacing: 16
+
+        // ── Header ────────────────────────────────────────────────
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 10
+
+            Label {
+                text: "SPLIT DATA"
+                font.pixelSize: Theme.fontLg
+                font.bold: true
+                color: Theme.headingColor
+                Layout.fillWidth: true
+            }
+
+            Button {
+                text: "\u2715"
+                flat: true
+                Layout.preferredWidth: 32
+                Layout.preferredHeight: 32
+                onClicked: root.close()
+
+                background: Rectangle {
+                    radius: Theme.radiusXs
+                    color: parent.hovered ? Theme.buttonNeutralHover : "transparent"
+                }
+                contentItem: Label {
+                    text: parent.text
+                    color: Theme.bodyColor
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
+                }
+            }
+        }
+
+        // ── Threshold Input ───────────────────────────────────────
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 16
+
+            ColumnLayout {
+                Layout.fillWidth: true
+                spacing: 4
+
+                Label {
+                    text: "THRESHOLD TEMPERATURE (°C)"
+                    color: Theme.sideMutedText
+                    font.pixelSize: Theme.fontSm
+                    font.bold: true
+                    font.letterSpacing: 1.0
+                }
+
+                RowLayout {
+                    Layout.fillWidth: true
+                    spacing: 8
+
+                    SpinBox {
+                        id: thresholdSpin
+                        from: 0
+                        to: 200
+                        value: root.threshold
+                        stepSize: 1
+                        editable: true
+                        Layout.fillWidth: true
+                        background: Rectangle {
+                            color: Theme.fieldBackground
+                            border.color: Theme.cardBorder
+                            border.width: 1
+                            radius: Theme.radiusSm
+                        }
+                    }
+
+                    Label {
+                        text: "°C"
+                        color: Theme.bodyColor
+                        font.pixelSize: Theme.fontMd
+                        verticalAlignment: Text.AlignVCenter
+                    }
+                }
+            }
+
+            ColumnLayout {
+                Layout.fillWidth: true
+                spacing: 4
+
+                Label {
+                    text: "SESSION CSV"
+                    color: Theme.sideMutedText
+                    font.pixelSize: Theme.fontSm
+                    font.bold: true
+                    font.letterSpacing: 1.0
+                }
+
+                Label {
+                    Layout.fillWidth: true
+                    text: root.currentFile !== ""
+                        ? root.currentFile.split("/").pop()
+                        : "No file loaded"
+                    color: root.currentFile !== "" ? Theme.bodyColor : Theme.sideMutedText
+                    font.pixelSize: Theme.fontSm
+                    elide: Text.ElideMiddle
+                }
+            }
+        }
+
+        // ── Split Button ──────────────────────────────────────────
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 10
+
+            Button {
+                id: splitBtn
+                text: "SPLIT"
+                Layout.fillWidth: true
+                enabled: !root.segmenting && root.currentFile !== ""
+                onClicked: {
+                    root.threshold = thresholdSpin.value;
+                    root.segmenting = true;
+                    streamController.splitData(root.currentFile, root.threshold);
+                }
+
+                background: Rectangle {
+                    radius: Theme.radiusSm
+                    color: splitBtn.enabled ? Theme.primaryAccent : Theme.buttonNeutralBackground
+                    border.color: splitBtn.enabled ? Theme.primaryAccent : "transparent"
+                    border.width: 1
+                }
+                contentItem: Row {
+                    spacing: 8
+                    anchors.centerIn: parent
+
+                    Label {
+                        text: splitBtn.enabled ? (root.segmenting ? "Segmenting..." : "SPLIT") : "LOAD DATA FIRST"
+                        color: splitBtn.enabled ? Theme.tone100 : Theme.sideMutedText
+                        font.pixelSize: Theme.fontSm
+                        font.bold: true
+                        font.letterSpacing: 1.0
+                    }
+
+                    BusyIndicator {
+                        running: root.segmenting
+                        visible: root.segmenting
+                        width: 16
+                        height: 16
+                    }
+                }
+            }
+        }
+
+        // ── Segments Table ────────────────────────────────────────
+        Rectangle {
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            radius: Theme.radiusSm
+            color: Theme.panelBackground
+            border.color: Theme.cardBorder
+            border.width: 1
+
+            ColumnLayout {
+                anchors.fill: parent
+                anchors.margins: 0
+                spacing: 0
+
+                // Table header
+                Rectangle {
+                    Layout.fillWidth: true
+                    Layout.preferredHeight: 36
+                    color: Theme.subtleSectionBackground
+                    border.color: Theme.cardBorder
+                    border.width: 1
+
+                    RowLayout {
+                        anchors.fill: parent
+                        anchors.margins: 12
+                        spacing: 8
+
+                        Label { text: "PHASE"; Layout.preferredWidth: 100; color: Theme.sideMutedText; font.bold: true; font.pixelSize: Theme.fontSm }
+                        Label { text: "START (s)"; Layout.preferredWidth: 120; color: Theme.sideMutedText; font.bold: true; font.pixelSize: Theme.fontSm }
+                        Label { text: "END (s)"; Layout.preferredWidth: 120; color: Theme.sideMutedText; font.bold: true; font.pixelSize: Theme.fontSm }
+                        Label { text: "AVG TEMP (°C)"; Layout.fillWidth: true; color: Theme.sideMutedText; font.bold: true; font.pixelSize: Theme.fontSm }
+                        Item { Layout.preferredWidth: 80 }
+                    }
+                }
+
+                // Table body (scrollable)
+                ScrollView {
+                    Layout.fillWidth: true
+                    Layout.fillHeight: true
+                    clip: true
+
+                    ColumnLayout {
+                        width: parent.width - 32
+                        spacing: 0
+
+                        Repeater {
+                            model: root.segments.length > 0 ? root.segments : []
+                            delegate: Rectangle {
+                                Layout.fillWidth: true
+                                Layout.preferredHeight: 40
+                                color: index % 2 === 0 ? Theme.cardBackground : "transparent"
+                                border.color: Theme.cardBorder
+
+                                RowLayout {
+                                    anchors.fill: parent
+                                    anchors.margins: 12
+                                    spacing: 8
+
+                                    Label {
+                                        text: modelData.label || ""
+                                        Layout.preferredWidth: 100
+                                        color: modelData.label === "Soak" ? Theme.statusSuccessColor :
+                                               modelData.label === "Ramp" ? Theme.statusWarningColor : Theme.bodyColor
+                                        font.bold: true
+                                        font.pixelSize: Theme.fontSm
+                                    }
+
+                                    Label {
+                                        text: (modelData.start_frame || 0).toString()
+                                        Layout.preferredWidth: 120
+                                        color: Theme.bodyColor
+                                        font.pixelSize: Theme.fontSm
+                                    }
+
+                                    Label {
+                                        text: (modelData.end_frame || 0).toString()
+                                        Layout.preferredWidth: 120
+                                        color: Theme.bodyColor
+                                        font.pixelSize: Theme.fontSm
+                                    }
+
+                                    Label {
+                                        text: (modelData.avg_temp || 0).toFixed(2) + " °C"
+                                        Layout.fillWidth: true
+                                        color: Theme.bodyColor
+                                        font.pixelSize: Theme.fontSm
+                                    }
+
+                                    Button {
+                                        id: exportBtn
+                                        text: "Export"
+                                        Layout.preferredWidth: 80
+                                        Layout.preferredHeight: 26
+                                        hoverEnabled: true
+                                        onClicked: streamController.exportSegment(index)
+
+                                        background: Rectangle {
+                                            radius: Theme.radiusXs
+                                            color: exportBtn.pressed ? Theme.buttonNeutralPressed
+                                                 : exportBtn.hovered ? Theme.buttonNeutralHover
+                                                 : Theme.buttonNeutralBackground
+                                            border.color: Theme.fieldBorder
+                                            border.width: 1
+                                        }
+                                        contentItem: Label {
+                                            text: exportBtn.text
+                                            color: Theme.buttonNeutralText
+                                            font.pixelSize: Theme.fontXs
+                                            horizontalAlignment: Text.AlignHCenter
+                                            verticalAlignment: Text.AlignVCenter
+                                        }
+                                    }
+                                }
+                            }
+                        }
+
+                        // Empty state
+                        Label {
+                            visible: root.segments.length === 0
+                            text: root.currentFile !== "" ? "Click SPLIT to segment data" : "Load a CSV file first"
+                            color: Theme.sideMutedText
+                            font.pixelSize: Theme.fontSm
+                            Layout.fillWidth: true
+                            Layout.preferredHeight: 100
+                            horizontalAlignment: Text.AlignHCenter
+                            verticalAlignment: Text.AlignVCenter
+                        }
+                    }
+                }
+            }
+        }
+
+        // ── Summary line ──────────────────────────────────────────
+        Label {
+            visible: root.segments.length > 0
+            text: root.segments.length + " segment" + (root.segments.length === 1 ? "" : "s")
+                + " found above " + root.threshold.toFixed(0) + "°C threshold."
+            color: Theme.bodyColor
+            font.pixelSize: Theme.fontSm
+        }
+
+        // ── Export feedback ───────────────────────────────────────
+        Label {
+            id: exportStatus
+            visible: text !== ""
+            color: Theme.bodyColor
+            font.pixelSize: Theme.fontSm
+            elide: Text.ElideMiddle
+            Layout.fillWidth: true
+        }
+    }
+
+    // ── Backend Connection ────────────────────────────────────────
+    Connections {
+        target: streamController
+        function onSplitResult(result) {
+            root.segmenting = false;
+            exportStatus.text = "";
+            if (result && result.success) {
+                root.segments = result.segments || [];
+                console.log("[SplitDialog] Segmented into", root.segments.length, "phases");
+            } else {
+                root.segments = [];
+                console.log("[SplitDialog] Split failed:", result.error || "unknown");
+            }
+        }
+
+        function onSegmentExported(result) {
+            if (result && result.success)
+                exportStatus.text = "Exported: " + result.path.split("/").pop();
+            else
+                exportStatus.text = "Export failed: " + (result.error || "unknown");
+        }
+    }
+
+}

src/pygui/ISC/Tabs/components/StatusActionsPanel.qml

@@ -0,0 +1,115 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import QtQuick.Layouts
+import ISC
+import ISC.Tabs.components
+
+// ── Status tab: Hardware Actions + Log Actions ──────────
+ColumnLayout {
+    spacing: Theme.sideRailSpacing
+
+    Rectangle {
+        Layout.fillWidth: true
+        Layout.preferredHeight: hwActionsCol.implicitHeight + 28
+        radius: Theme.sidePanelRadius
+        border.color: Theme.sideBorder
+        border.width: 1
+        color: Theme.sidePanelBackground
+
+        ColumnLayout {
+            id: hwActionsCol
+            anchors.fill: parent
+            anchors.margins: 14
+            spacing: 6
+
+            Label {
+                text: "HARDWARE ACTIONS"
+                color: Theme.sideMutedText
+                font.family: Theme.uiFontFamily
+                font.pixelSize: Theme.fontSm
+                font.letterSpacing: 1.5
+                font.bold: true
+            }
+
+            RailActionButton {
+                label: "DETECT WAFER"
+                iconSource: "../icons/detect.svg"
+                Layout.fillWidth: true
+                enabled: !deviceController.operationInProgress
+                onClicked: root._doDetect()
+            }
+
+            RailActionButton {
+                label: "READ MEMORY"
+                iconSource: "../icons/read.svg"
+                Layout.fillWidth: true
+                enabled: deviceController.waferDetected && !deviceController.operationInProgress
+                onClicked: deviceController.readMemoryAsync()
+            }
+
+            RailActionButton {
+                label: "ERASE MEMORY"
+                iconSource: "../icons/erase.svg"
+                Layout.fillWidth: true
+                destructive: true
+                enabled: deviceController.waferDetected && !deviceController.operationInProgress
+                onClicked: deviceController.eraseMemory(
+                    deviceController.selectedPort)
+            }
+
+            RailActionButton {
+                label: "READ DEBUG"
+                iconSource: "../icons/read.svg"
+                Layout.fillWidth: true
+                // One-shot toggle: "on" while the debug read is in flight,
+                // resets automatically once deviceController flips status.
+                toggled: deviceController.connectionStatus === "Reading debug..."
+                enabled: deviceController.waferDetected && !deviceController.operationInProgress
+                onClicked: deviceController.readDebug(deviceController.selectedPort)
+            }
+        }
+    }
+
+    Rectangle {
+        Layout.fillWidth: true
+        Layout.preferredHeight: logActionsCol.implicitHeight + 28
+        radius: Theme.sidePanelRadius
+        border.color: Theme.sideBorder
+        border.width: 1
+        color: Theme.sidePanelBackground
+
+        ColumnLayout {
+            id: logActionsCol
+            anchors.fill: parent
+            anchors.margins: 14
+            spacing: 6
+
+            Label {
+                text: "LOG ACTIONS"
+                color: Theme.sideMutedText
+                font.family: Theme.uiFontFamily
+                font.pixelSize: Theme.fontSm
+                font.letterSpacing: 1.5
+                font.bold: true
+            }
+
+            RailActionButton {
+                label: "REFRESH SESSION"
+                iconSource: "../icons/refresh.svg"
+                Layout.fillWidth: true
+                enabled: !deviceController.operationInProgress
+                onClicked: deviceController.clearSession()
+            }
+
+            RailActionButton {
+                label: "CLEAR LOG"
+                iconSource: "../icons/x.svg"
+                Layout.fillWidth: true
+                onClicked: deviceController.clearActivityLog()
+            }
+        }
+    }
+
+    Item { Layout.fillHeight: true }
+}

src/pygui/ISC/Tabs/components/StreamControlPanel.qml

@@ -0,0 +1,374 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import QtQuick.Dialogs
+import QtQuick.Layouts
+import ISC
+
+Rectangle {
+    id: root
+    Layout.fillWidth: true
+    implicitHeight: contentCol.implicitHeight + 24
+
+    color: Theme.sidePanelBackground
+    radius: Theme.sidePanelRadius
+    border.color: Theme.sideBorder
+    border.width: 1
+
+    signal exportRequested(string filePath, string extra)
+
+    property int _liveSecs: 0
+    Connections {
+        target: streamController
+        function onModeChanged() {
+            if (streamController.mode === "review" && modeBar.currentIndex !== 0) {
+                modeBar.currentIndex = 0;
+            }
+        }
+    }
+    Timer {
+        id: liveTimer
+        interval: 1000
+        repeat: true
+        running: streamController.mode === "live" && streamController.state !== "idle"
+        onTriggered: root._liveSecs++
+        onRunningChanged: if (!running) root._liveSecs = 0
+    }
+
+    function fmtTime(s) {
+        var m = Math.floor(s / 60);
+        var ss = s % 60;
+        return (m < 10 ? "0" : "") + m + ":" + (ss < 10 ? "0" : "") + ss;
+    }
+
+    function switchToReview() {
+        modeBar.currentIndex = 0;
+    }
+
+    ColumnLayout {
+        id: contentCol
+        anchors {
+            fill: parent
+            topMargin: 10
+            leftMargin: 12
+            rightMargin: 12
+            bottomMargin: 12
+        }
+        spacing: 8
+
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 6
+
+            TabBar {
+                id: modeBar
+                currentIndex: 0
+                spacing: 2
+                padding: 2
+                Layout.fillWidth: true
+                Layout.preferredHeight: 28
+                background: Rectangle {
+                    color: Theme.subtleSectionBackground
+                    radius: Theme.radiusXs
+                    border.color: Theme.cardBorder
+                    border.width: 1
+                }
+
+                TabButton {
+                    text: "Review"
+                    Layout.fillWidth: true
+                    implicitHeight: 24
+                    font.pixelSize: Theme.fontMd
+                    font.weight: parent.checked ? Font.Medium : Font.Normal
+                    background: Rectangle {
+                        color: parent.checked ? Theme.tabActiveBackground : "transparent"
+                        radius: Theme.radiusXs - 1
+                    }
+                    contentItem: Text {
+                        text: parent.text
+                        color: parent.checked ? Theme.headingColor : Theme.bodyColor
+                        font: parent.font
+                        horizontalAlignment: Text.AlignHCenter
+                        verticalAlignment: Text.AlignVCenter
+                    }
+                }
+
+                TabButton {
+                    id: liveTab
+                    text: "Live"
+                    enabled: deviceController.connectionStatus === "Connected"
+                    opacity: enabled ? 1.0 : 0.4
+                    Layout.fillWidth: true
+                    implicitHeight: 24
+                    font.pixelSize: Theme.fontMd
+                    font.weight: parent.checked ? Font.Medium : Font.Normal
+
+                    AppToolTip {
+                        visible: disabledHover.containsMouse && !liveTab.enabled
+                        text: "Connect a wafer to enable Live mode"
+                        delay: 300
+                    }
+
+                    MouseArea {
+                        id: disabledHover
+                        anchors.fill: parent
+                        enabled: !liveTab.enabled
+                        hoverEnabled: true
+                        acceptedButtons: Qt.NoButton
+                    }
+
+                    background: Rectangle {
+                        color: parent.checked ? Theme.tabActiveBackground : "transparent"
+                        radius: Theme.radiusXs - 1
+                    }
+
+                    contentItem: Item {
+                        Row {
+                            spacing: 4
+                            anchors.centerIn: parent
+                            Rectangle {
+                                id: liveTabDot
+                                width: 5; height: 5; radius: 2.5
+                                anchors.verticalCenter: parent.verticalCenter
+                                color: liveTab.enabled ? Theme.metricGood : Theme.sideMutedText
+
+                                SequentialAnimation on opacity {
+                                    running: streamController.mode === "live" && streamController.state !== "idle"
+                                    loops: Animation.Infinite
+                                    NumberAnimation { to: 0.2; duration: 600; easing.type: Easing.InOutQuad }
+                                    NumberAnimation { to: 1.0; duration: 600; easing.type: Easing.InOutQuad }
+                                    onRunningChanged: if (!running) liveTabDot.opacity = 1.0
+                                }
+                            }
+                            Text {
+                                text: liveTab.text
+                                color: liveTab.checked ? Theme.headingColor : Theme.bodyColor
+                                font: liveTab.font
+                                verticalAlignment: Text.AlignVCenter
+                                height: parent.height
+                            }
+                    }
+                }
+            }
+
+            onCurrentIndexChanged: {
+                    if (currentIndex === 1) {
+                        if (deviceController.connectionStatus !== "Connected") {
+                            currentIndex = 0;
+                            return;
+                        }
+                        streamController.setMode("live");
+                        var fc = "";
+                        if (deviceController.lastWaferInfo && deviceController.lastWaferInfo.length > 0) {
+                            fc = deviceController.lastWaferInfo[0];
+                        }
+                        streamController.startStream(deviceController.selectedPort, fc);
+                    } else {
+                        streamController.setMode("review");
+                    }
+                }
+            }
+        }
+
+        Rectangle {
+            Layout.fillWidth: true
+            height: 1
+            color: Theme.cardBorder
+        }
+
+        Label {
+            text: "METRICS"
+            color: Theme.sideMutedText
+            font.family: Theme.uiFontFamily
+            font.pixelSize: Theme.fontMd
+            font.letterSpacing: 1.5
+            font.bold: true
+            Layout.bottomMargin: 2
+        }
+
+        MetricRow {
+            label: "Received Frames"
+            value: modeBar.currentIndex === 1 ? streamController.receivedCount : "—"
+        }
+
+        MetricRow {
+            label: "Errors"
+            value: modeBar.currentIndex === 1 ? streamController.errorCount : "—"
+            valueColor: streamController.errorCount > 0 ? Theme.statusWarningColor : Theme.headingColor
+        }
+
+        MetricRow {
+            label: "Resyncs"
+            value: modeBar.currentIndex === 1 ? streamController.resyncCount : "—"
+        }
+
+        MetricRow {
+            label: "Elapsed"
+            value: modeBar.currentIndex === 1 ? root.fmtTime(root._liveSecs) : "—"
+        }
+
+        Rectangle {
+            Layout.fillWidth: true
+            height: 1
+            color: Theme.cardBorder
+        }
+
+        Label {
+            text: "ACTIONS"
+            color: Theme.sideMutedText
+            font.family: Theme.uiFontFamily
+            font.pixelSize: Theme.fontMd
+            font.letterSpacing: 1.5
+            font.bold: true
+            Layout.bottomMargin: 2
+        }
+
+        RowLayout {
+            Layout.fillWidth: true
+            spacing: 6
+
+            Button {
+                id: recordBtn
+                Layout.fillWidth: true
+                implicitHeight: 28
+                enabled: streamController.mode === "live"
+                opacity: enabled ? 1.0 : 0.4
+                text: streamController.recording ? "Stop REC" : "Record"
+
+                AppToolTip {
+                    visible: recordBtn.hovered && !recordBtn.enabled
+                    text: "Connect to Live to start recording"
+                    delay: 300
+                }
+
+                onClicked: {
+                    if (streamController.recording) {
+                        streamController.stopRecording();
+                    } else {
+                        var info = deviceController.lastWaferInfo;
+                        var serial = (info && info.length > 1) ? info[1] : "";
+                        var ts = Qt.formatDateTime(new Date(), "yyyyMMdd_HHmmss");
+                        var name = "live_" + (serial ? serial + "_" : "") + ts + ".csv";
+                        streamController.startRecording(deviceController.saveDataDir + "/" + name, serial);
+                    }
+                }
+
+                background: Rectangle {
+                    radius: Theme.radiusSm
+                    color: recordBtn.down ? Theme.transportButtonHover
+                         : (recordBtn.hovered ? Theme.transportButtonBg : "transparent")
+                    border.width: Theme.borderThin
+                    border.color: Theme.sideBorder
+                }
+                contentItem: Text {
+                    text: recordBtn.text
+                    color: Theme.headingColor
+                    font.pixelSize: Theme.fontMd
+                    font.weight: Font.Medium
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
+                }
+            }
+
+            Button {
+                id: exportBtn
+                Layout.fillWidth: true
+                implicitHeight: 28
+                text: "Export"
+                // Nothing to export until a file is loaded or a stream has played
+                enabled: streamController.sensorValues.length > 0
+                opacity: enabled ? 1 : 0.4
+
+                onClicked: {
+                    // Default into <saveDataDir>/Export (created on demand)
+                    exportDialog.selectedFile = "file://" + deviceController.exportDir() + "/wafer_map.png"
+                    exportDialog.open()
+                }
+
+                background: Rectangle {
+                    radius: Theme.radiusSm
+                    color: exportBtn.down ? Theme.transportButtonHover
+                         : (exportBtn.hovered ? Theme.transportButtonBg : "transparent")
+                    border.width: Theme.borderThin
+                    border.color: Theme.sideBorder
+                }
+                contentItem: Text {
+                    text: exportBtn.text
+                    color: Theme.headingColor
+                    font.pixelSize: Theme.fontMd
+                    font.weight: Font.Medium
+                    horizontalAlignment: Text.AlignHCenter
+                    verticalAlignment: Text.AlignVCenter
+                }
+            }
+
+            FileDialog {
+                id: exportDialog
+                title: "Export Wafer Map"
+                fileMode: FileDialog.SaveFile
+                defaultSuffix: "png"
+                nameFilters: ["PNG files (*.png)"]
+                onAccepted: {
+                    var path = String(selectedFile).replace(/^file:\/\//, "");
+                    var extra = "";
+                    if (streamController.mode === "live") {
+                        extra = "Frames: " + streamController.receivedCount
+                              + "   Errors: " + streamController.errorCount
+                              + "   Resyncs: " + streamController.resyncCount
+                              + "   Elapsed: " + root.fmtTime(root._liveSecs);
+                    }
+                    root.exportRequested(path, extra);
+                }
+            }
+        }
+
+        Rectangle {
+            Layout.fillWidth: true
+            height: 1
+            color: Theme.cardBorder
+        }
+
+        Button {
+            id: primaryBtn
+            Layout.fillWidth: true
+            implicitHeight: 32
+            text: streamController.mode === "live" ? "STOP" : "START"
+            enabled: streamController.mode === "live"
+                     ? true
+                     : deviceController.connectionStatus === "Connected"
+            opacity: enabled ? 1.0 : 0.4
+
+            AppToolTip {
+                visible: primaryBtn.hovered && !primaryBtn.enabled
+                text: "Connect a wafer to enable Live mode"
+                delay: 300
+            }
+
+            onClicked: {
+                if (streamController.mode === "live") {
+                    streamController.stopStream();
+                    modeBar.currentIndex = 0;
+                } else {
+                    modeBar.currentIndex = 1;
+                }
+            }
+
+            background: Rectangle {
+                radius: Theme.radiusSm
+                color: primaryBtn.down ? Theme.transportButtonHover
+                     : (primaryBtn.hovered ? Theme.transportButtonBg : "transparent")
+                border.width: Theme.borderThin
+                border.color: Theme.sideBorder
+            }
+            contentItem: Text {
+                text: primaryBtn.text
+                color: Theme.headingColor
+                font.pixelSize: Theme.fontMd
+                font.weight: Font.Medium
+                font.letterSpacing: 1.0
+                horizontalAlignment: Text.AlignHCenter
+                verticalAlignment: Text.AlignVCenter
+            }
+        }
+    }
+}

src/pygui/ISC/Tabs/components/TransportBar.qml

@@ -1,103 +1,284 @@
 import QtQuick
 import QtQuick.Controls
+import QtQuick.Controls.impl
 import QtQuick.Layouts
 import ISC
 
-RowLayout {
+// ===== Control Bar =====
-    spacing: 2
+// Review-mode transport footer (frame counter, play/pause/step, speed).
+// Live-mode's Received/Errors/Stop moved to ReadoutPanel's "LIVE STREAM"
+// card so this bar can collapse to zero height and free vertical space for
+// the trend chart while streaming.
+Item {
+    id: bar
+    Layout.fillWidth: true
+    implicitHeight: hasContent ? 80 : 0
+    Behavior on implicitHeight {
+        NumberAnimation { duration: Theme.durationBase; easing.type: Theme.easeStandard }
+    }
+    clip: true
 
-    component TBtn: Button {
+    // Only shown in review mode, and only once a file is loaded
-        implicitWidth: 44
+    readonly property bool hasContent: streamController.mode !== "live" && streamController.loadedFile !== ""
-        implicitHeight: 32
-        hoverEnabled: true
-        font.pixelSize: 13
-        background: Rectangle {
-            color: parent.pressed ? Theme.transportButtonHover
-                 : parent.hovered ? Theme.transportButtonBg
-                 : Theme.transportBackground
-            radius: Theme.radiusSm
-        }
-        contentItem: Text {
-            text: parent.text
-            color: Theme.headingColor
-            font: parent.font
-            horizontalAlignment: Text.AlignHCenter
-            verticalAlignment: Text.AlignVCenter
-        }
-    }
 
-    // Frame counter badge on the left
+    // ── REVIEW MODE ──────────────────────────────────────────────
+    Item {
+        id: reviewContent
+        anchors.fill: parent
+
+        // Single centered pill for frame counter + transport + speed
         Rectangle {
-        id: frameCounter
-        implicitWidth: frameCounterText.implicitWidth + 16
-        implicitHeight: 32
-        color: Theme.fieldBackground
-        border.color: Theme.cardBorder
-        border.width: Theme.borderThin
-        radius: Theme.radiusSm
-
-        Text {
-            id: frameCounterText
             anchors.centerIn: parent
-            text: "Frame " + (streamController.frameIndex + 1) + " / " + streamController.frameTotal
+            implicitWidth: reviewRow.implicitWidth + 48
-            color: Theme.headingColor
+            implicitHeight: 68
-            font.pixelSize: 11
+            radius: Theme.radiusMd
+            color: Theme.sidePanelBackground
+            border.color: Theme.sideBorder
+            border.width: 1
+
+            Row {
+                id: reviewRow
+                anchors.centerIn: parent
+                spacing: 24
+
+                // Frame counter
+                Row {
+                    spacing: 6
+                    anchors.verticalCenter: parent.verticalCenter
+
+                    Label {
+                        text: "Frame"
+                        color: Theme.sideMutedText
+                        font.family: Theme.uiFontFamily
+                        font.pixelSize: Theme.fontMd
                         font.weight: Font.Medium
-        }
+                        anchors.verticalCenter: parent.verticalCenter
                     }
 
-    // Left fill — centers the button cluster
+                    TextField {
-    Item { Layout.fillWidth: true }
+                        id: frameInput
-
+                        text: String(streamController.frameIndex + 1)
-    TBtn { text: "⏮"; onClicked: streamController.step(-1) }
+                        font.pixelSize: Theme.fontMd
-    TBtn { text: "⏹"; onClicked: streamController.stop() }
+                        font.weight: Font.Medium
-    TBtn { text: "⏸"; onClicked: streamController.pause() }
+                        font.family: Theme.codeFontFamily
-    // Play: slightly wider; leftPadding nudge compensates for ▶ optical offset
-    TBtn {
-        text: "▶"
-        implicitWidth: 52
-        contentItem: Text {
-            text: parent.text
                         color: Theme.headingColor
-            font: parent.font
+                        verticalAlignment: TextInput.AlignVCenter
-            horizontalAlignment: Text.AlignHCenter
+                        horizontalAlignment: TextInput.AlignHCenter
-            verticalAlignment: Text.AlignVCenter
+                        selectByMouse: true
-            leftPadding: 2
+                        inputMethodHints: Qt.ImhDigitsOnly
-        }
+                        padding: 0
-        onClicked: streamController.play()
+                        width: Math.max(44, contentWidth + 16)
-    }
+                        height: 28
-    TBtn { text: "⏭"; onClicked: streamController.step(1) }
+                        anchors.verticalCenter: parent.verticalCenter
 
-    // Right fill — balances centering
+                        background: Rectangle {
-    Item { Layout.fillWidth: true }
+                            color: Theme.fieldBackground
+                            radius: Theme.radiusXs
+                            border.color: frameInput.activeFocus ? Theme.fieldBorderFocus : (frameInput.hovered ? Theme.fieldBorderFocus : Theme.sideBorder)
+                            border.width: 1
+                        }
 
-    // Speed cycle
+                        onEditingFinished: {
+                            var val = parseInt(text)
+                            if (!isNaN(val)) {
+                                var targetFrame = Math.max(1, Math.min(val, streamController.frameTotal))
+                                streamController.seek(targetFrame - 1)
+                            }
+                            text = String(streamController.frameIndex + 1)
+                        }
+
+                        Connections {
+                            target: streamController
+                            function onFrameUpdated() {
+                                if (!frameInput.activeFocus) {
+                                    frameInput.text = String(streamController.frameIndex + 1)
+                                }
+                            }
+                        }
+                    }
+
+                    Label {
+                        text: "/ " + streamController.frameTotal
+                        color: Theme.sideMutedText
+                        font.family: Theme.uiFontFamily
+                        font.pixelSize: Theme.fontMd
+                        font.weight: Font.Medium
+                        anchors.verticalCenter: parent.verticalCenter
+                    }
+                }
+
+                // Separator 1
+                Rectangle {
+                    anchors.verticalCenter: parent.verticalCenter
+                    width: 1
+                    height: 36
+                    color: Theme.sideBorder
+                }
+
+                // Media Buttons Row
+                Row {
+                    anchors.verticalCenter: parent.verticalCenter
+                    spacing: 12
+
+                    // Skip-start
+                    Button {
+                        id: skipStartBtn
+                        anchors.verticalCenter: parent.verticalCenter
+                        implicitWidth: 56
+                        implicitHeight: 56
+                        hoverEnabled: true
+                        background: Rectangle {
+                            radius: 8
+                            color: skipStartBtn.pressed ? Theme.transportButtonHover
+                                 : skipStartBtn.hovered ? Theme.transportButtonBg
+                                 : "transparent"
+                            Behavior on color {
+                                ColorAnimation { duration: Theme.durationFast }
+                            }
+                        }
+                        contentItem: IconImage {
+                            source: "../icons/prev.svg"
+                            width: 22; height: 22
+                            sourceSize.width: 22
+                            sourceSize.height: 22
+                            color: Theme.headingColor
+                            anchors.centerIn: parent
+                        }
+                        onClicked: streamController.step(-1)
+                    }
+
+                    // Stop
+                    Button {
+                        id: reviewStopBtn
+                        anchors.verticalCenter: parent.verticalCenter
+                        implicitWidth: 56
+                        implicitHeight: 56
+                        hoverEnabled: true
+                        background: Rectangle {
+                            radius: 8
+                            color: reviewStopBtn.pressed ? Theme.transportButtonHover
+                                 : reviewStopBtn.hovered ? Theme.transportButtonBg
+                                 : "transparent"
+                            Behavior on color {
+                                ColorAnimation { duration: Theme.durationFast }
+                            }
+                        }
+                        contentItem: IconImage {
+                            source: "../icons/stop.svg"
+                            width: 20; height: 20
+                            sourceSize.width: 20
+                            sourceSize.height: 20
+                            color: Theme.headingColor
+                            anchors.centerIn: parent
+                        }
+                        onClicked: streamController.stop()
+                    }
+
+                    // Play / Pause toggle
+                    Button {
+                        id: playPauseBtn
+                        anchors.verticalCenter: parent.verticalCenter
+                        implicitWidth: 56
+                        implicitHeight: 56
+                        hoverEnabled: true
+                        background: Rectangle {
+                            radius: 8
+                            color: playPauseBtn.pressed ? Theme.transportButtonHover
+                                 : playPauseBtn.hovered ? Theme.transportButtonBg
+                                 : "transparent"
+                            Behavior on color {
+                                ColorAnimation { duration: Theme.durationFast }
+                            }
+                        }
+                        contentItem: IconImage {
+                            source: streamController.playing ? "../icons/pause.svg" : "../icons/play.svg"
+                            width: 22; height: 22
+                            sourceSize.width: 22
+                            sourceSize.height: 22
+                            color: Theme.headingColor
+                            anchors.centerIn: parent
+                        }
+                        onClicked: {
+                            if (streamController.playing) {
+                                streamController.pause();
+                            } else {
+                                streamController.play();
+                            }
+                        }
+                    }
+
+                    // Skip-end
+                    Button {
+                        id: skipEndBtn
+                        anchors.verticalCenter: parent.verticalCenter
+                        implicitWidth: 56
+                        implicitHeight: 56
+                        hoverEnabled: true
+                        background: Rectangle {
+                            radius: 8
+                            color: skipEndBtn.pressed ? Theme.transportButtonHover
+                                 : skipEndBtn.hovered ? Theme.transportButtonBg
+                                 : "transparent"
+                            Behavior on color {
+                                ColorAnimation { duration: Theme.durationFast }
+                            }
+                        }
+                        contentItem: IconImage {
+                            source: "../icons/next.svg"
+                            width: 22; height: 22
+                            sourceSize.width: 22
+                            sourceSize.height: 22
+                            color: Theme.headingColor
+                            anchors.centerIn: parent
+                        }
+                        onClicked: streamController.step(1)
+                    }
+                }
+
+                // Separator 2
+                Rectangle {
+                    anchors.verticalCenter: parent.verticalCenter
+                    width: 1
+                    height: 36
+                    color: Theme.sideBorder
+                }
+
+                // Speed capsule button
                 Button {
                     id: speedBtn
-        property var speeds: [1, 2, 5]
+                    anchors.verticalCenter: parent.verticalCenter
+                    property var speeds: [1, 2, 4]
                     property int idx: 0
-        implicitWidth: 44
+                    implicitWidth: 72
-        implicitHeight: 32
+                    implicitHeight: 48
                     hoverEnabled: true
-        text: speeds[idx] + "×"
+                    text: speeds[idx] + "x"
-        font.pixelSize: 11
+                    font.family: Theme.uiFontFamily
+                    font.pixelSize: Theme.fontSm
                     font.weight: Font.Medium
                     background: Rectangle {
-            color: parent.pressed ? Theme.transportButtonHover
+                        radius: 8
-                 : parent.hovered ? Theme.transportButtonBg
+                        color: speedBtn.pressed ? Theme.transportButtonHover
-                 : Theme.transportBackground
+                             : Theme.transportButtonBg
-            radius: Theme.radiusSm
+                        border.color: Theme.sideBorder
+                        border.width: 1
+                        Behavior on color {
+                            ColorAnimation { duration: Theme.durationFast }
+                        }
                     }
                     contentItem: Text {
                         text: parent.text
-            color: Theme.bodyColor
+                        color: Theme.headingColor
                         font: parent.font
                         horizontalAlignment: Text.AlignHCenter
                         verticalAlignment: Text.AlignVCenter
                     }
                     onClicked: {
-            idx = (idx + 1) % speeds.length
+                        idx = (idx + 1) % speeds.length;
-            streamController.setSpeed(speeds[idx])
+                        streamController.setSpeed(speeds[idx]);
+                    }
+                }
+            }
         }
     }
 }

src/pygui/ISC/Tabs/components/UtilityFooter.qml

@@ -0,0 +1,115 @@
+import QtQuick
+import QtQuick.Controls
+import QtQuick.Controls.impl
+import QtQuick.Layouts
+import ISC
+
+// ── BOX 4: Utility Buttons ─────────────────────────────────
+Rectangle {
+    id: utilFooter
+    Layout.fillWidth: true
+    Layout.preferredHeight: Theme.sideFooterUtility
+    radius: Theme.sidePanelRadius
+    border.color: Theme.sideBorder
+    border.width: 1
+    color: Theme.sidePanelBackground
+
+    property var settingsPopup: null
+    property var aboutDialog: null
+
+    RowLayout {
+        anchors.fill: parent
+        anchors.margins: 4
+        spacing: 4
+
+        Button {
+            id: settingsBtn
+            flat: true
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            icon.source: "../icons/settings.svg"
+            onClicked: if (settingsPopup) settingsPopup.open()
+
+            background: Rectangle {
+                radius: 8
+                color: settingsBtn.hovered
+                    ? Theme.sideActiveBackground : "transparent"
+            }
+
+            contentItem: Row {
+                spacing: 6
+                anchors.centerIn: parent
+
+                IconImage {
+                    anchors.verticalCenter: parent.verticalCenter
+                    width: 16
+                    height: 16
+                    source: "../icons/settings.svg"
+                    sourceSize.width: 16
+                    sourceSize.height: 16
+                    color: Theme.headingColor
+                    opacity: 0.75
+                }
+
+                Label {
+                    anchors.verticalCenter: parent.verticalCenter
+                    text: "SETTINGS"
+                    color: Theme.headingColor
+                    font.family: Theme.uiFontFamily
+                    font.pixelSize: Theme.fontXs
+                    font.bold: true
+                    font.letterSpacing: 1.2
+                    opacity: 0.8
+                }
+            }
+        }
+
+        Rectangle {
+            width: 1
+            height: 24
+            color: Theme.sideBorder
+        }
+
+        Button {
+            id: aboutBtn
+            flat: true
+            Layout.fillWidth: true
+            Layout.fillHeight: true
+            icon.source: "../icons/about.svg"
+            onClicked: if (aboutDialog) aboutDialog.open()
+
+            background: Rectangle {
+                radius: 8
+                color: aboutBtn.hovered
+                    ? Theme.sideActiveBackground : "transparent"
+            }
+
+            contentItem: Row {
+                spacing: 6
+                anchors.centerIn: parent
+
+                IconImage {
+                    anchors.verticalCenter: parent.verticalCenter
+                    width: 16
+                    height: 16
+                    source: "../icons/about.svg"
+                    sourceSize.width: 16
+                    sourceSize.height: 16
+                    color: Theme.headingColor
+                    opacity: 0.75
+                }
+
+                Label {
+                    anchors.verticalCenter: parent.verticalCenter
+                    text: "ABOUT"
+                    color: Theme.headingColor
+                    font.family: Theme.uiFontFamily
+                    font.pixelSize: Theme.fontXs
+                    font.bold: true
+                    font.letterSpacing: 1.2
+                    opacity: 0.8
+                }
+            }
+        }
+    }
+}

src/pygui/ISC/Tabs/components/WaferMapView.qml

@@ -3,11 +3,13 @@ import QtQuick.Controls
 import ISC
 import ISC.Wafer
 
-
 Item {
     id: root
     property real blend: 0.0
     property bool showLabels: true
+    property alias showExtremes: map.showExtremes
+    property alias showThickness: map.showThickness
+    property alias hasThickness: map.hasThickness
 
     WaferMapItem {
         id: map
@@ -29,21 +31,44 @@ Item {
         highColor: Theme.sensorHigh
         textColor: Theme.headingColor
 
+        // Grows the hovered marker smoothly; hoverScale setter triggers a repaint.
+        hoverScale: 1.0 + 0.35 * hoverPulse
+        property real hoverPulse: map.hoveredIndex >= 0 ? 1.0 : 0.0
+        Behavior on hoverPulse {
+            NumberAnimation { duration: 150; easing.type: Easing.OutQuad }
+        }
+
+        HoverHandler {
+            id: hoverHandler
+            onPointChanged: {
+                map.hoveredIndex = streamController.mode === "live"
+                    ? -1
+                    : map.which_marker(hoverHandler.point.position.x, hoverHandler.point.position.y);
+            }
+            onHoveredChanged: if (!hoverHandler.hovered) map.hoveredIndex = -1
+            cursorShape: map.hoveredIndex >= 0 ? Qt.PointingHandCursor : Qt.ArrowCursor
+        }
 
         TapHandler {
-            onTapped: (ev) => {
+            onTapped: ev => {
-                var idx = map.which_marker(ev.position.x, ev.position.y)
+                if (streamController.mode === "live")
-                if (idx >= 0) replaceDialog.openFor(idx)    
+                    return;
+                var idx = map.which_marker(ev.position.x, ev.position.y);
+                if (idx >= 0)
+                    replaceDialog.openFor(idx);
             }
         }
     }
 
-    ReplaceSensorDialog { id: replaceDialog}
+    ReplaceSensorDialog {
-
+        id: replaceDialog
-    function exportImage(filePath) {
-        return map.export_image(filePath)
     }
 
-
+    function exportImage(filePath, extra) {
-
+        return map.export_image(filePath, extra || "");
+    }
+
+    function loadThickness(filePath) {
+        return map.loadThickness(filePath);
+    }
 }

src/pygui/ISC/Tabs/components/qmldir

@@ -5,3 +5,22 @@ ReadoutPanel 1.0 ReadoutPanel.qml
 TransportBar 1.0 TransportBar.qml
 WaferMapView 1.0 WaferMapView.qml
 ReplaceSensorDialog 1.0 ReplaceSensorDialog.qml
+RailActionButton 1.0 RailActionButton.qml
+SelectFileDialog 1.0 SelectFileDialog.qml
+SplitDialog 1.0 SplitDialog.qml
+StreamControlPanel 1.0 StreamControlPanel.qml
+StatusActionsPanel 1.0 StatusActionsPanel.qml
+ConnectionFooter 1.0 ConnectionFooter.qml
+UtilityFooter 1.0 UtilityFooter.qml
+PanelCheckBox 1.0 PanelCheckBox.qml
+ReadoutStat 1.0 ReadoutStat.qml
+MetricRow 1.0 MetricRow.qml
+AppToolTip 1.0 AppToolTip.qml
+SectionTitle 1.0 SectionTitle.qml
+PanelBox 1.0 PanelBox.qml
+PanelSlider 1.0 PanelSlider.qml
+EditableScrubStat 1.0 EditableScrubStat.qml
+ComparisonChartCard 1.0 ComparisonChartCard.qml
+OverlapMapCard 1.0 OverlapMapCard.qml
+ComparisonSidePanel 1.0 ComparisonSidePanel.qml
+RunChart 1.0 RunChart.qml

src/pygui/ISC/Tabs/icon/excel.svg

@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?><!-- Uploaded to: SVG Repo, www.svgrepo.com, Generator: SVG Repo Mixer Tools -->
-<svg width="800px" height="800px" viewBox="0 0 24 24" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path fill-rule="evenodd" clip-rule="evenodd" d="M9.29289 1.29289C9.48043 1.10536 9.73478 1 10 1H18C19.6569 1 21 2.34315 21 4V9C21 9.55228 20.5523 10 20 10C19.4477 10 19 9.55228 19 9V4C19 3.44772 18.5523 3 18 3H11V8C11 8.55228 10.5523 9 10 9H5V20C5 20.5523 5.44772 21 6 21H7C7.55228 21 8 21.4477 8 22C8 22.5523 7.55228 23 7 23H6C4.34315 23 3 21.6569 3 20V8C3 7.73478 3.10536 7.48043 3.29289 7.29289L9.29289 1.29289ZM6.41421 7H9V4.41421L6.41421 7ZM19 12C19.5523 12 20 12.4477 20 13V19H23C23.5523 19 24 19.4477 24 20C24 20.5523 23.5523 21 23 21H19C18.4477 21 18 20.5523 18 20V13C18 12.4477 18.4477 12 19 12ZM11.8137 12.4188C11.4927 11.9693 10.8682 11.8653 10.4188 12.1863C9.96935 12.5073 9.86526 13.1318 10.1863 13.5812L12.2711 16.5L10.1863 19.4188C9.86526 19.8682 9.96935 20.4927 10.4188 20.8137C10.8682 21.1347 11.4927 21.0307 11.8137 20.5812L13.5 18.2205L15.1863 20.5812C15.5073 21.0307 16.1318 21.1347 16.5812 20.8137C17.0307 20.4927 17.1347 19.8682 16.8137 19.4188L14.7289 16.5L16.8137 13.5812C17.1347 13.1318 17.0307 12.5073 16.5812 12.1863C16.1318 11.8653 15.5073 11.9693 15.1863 12.4188L13.5 14.7795L11.8137 12.4188Z" fill="#000000"/>
-</svg>

src/pygui/ISC/Tabs/icons/about.svg

@@ -0,0 +1,15 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <circle cx="12" cy="12" r="10" />
+  <path d="M12 16v-4" />
+  <path d="M12 8h.01" />
+</svg>

src/pygui/ISC/Tabs/icons/back.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="m12 19-7-7 7-7" />
+  <path d="M19 12H5" />
+</svg>

src/pygui/ISC/Tabs/icons/bar-chart.svg

@@ -0,0 +1,15 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <line x1="18" x2="18" y1="20" y2="10" />
+  <line x1="12" x2="12" y1="20" y2="4" />
+  <line x1="6" x2="6" y1="20" y2="14" />
+</svg>

src/pygui/ISC/Tabs/icons/check.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M20 6 9 17l-5-5" />
+</svg>

src/pygui/ISC/Tabs/icons/chevron-down.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="m6 9 6 6 6-6" />
+</svg>

src/pygui/ISC/Tabs/icons/compare.svg

@@ -0,0 +1,16 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M8 3 4 7l4 4" />
+  <path d="M4 7h16" />
+  <path d="m16 21 4-4-4-4" />
+  <path d="M20 17H4" />
+</svg>

src/pygui/ISC/Tabs/icons/data.svg

@@ -0,0 +1,15 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <ellipse cx="12" cy="5" rx="9" ry="3" />
+  <path d="M3 5V19A9 3 0 0 0 21 19V5" />
+  <path d="M3 12A9 3 0 0 0 21 12" />
+</svg>

src/pygui/ISC/Tabs/icons/detect.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="m21 21-4.34-4.34" />
+  <circle cx="11" cy="11" r="8" />
+</svg>

src/pygui/ISC/Tabs/icons/edit.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M17 3a2.85 2.85 0 1 1 4 4L7.5 20.5 2 22l1.5-5.5Z" />
+  <path d="m15 5 4 4" />
+</svg>

src/pygui/ISC/Tabs/icons/erase.svg

@@ -0,0 +1,17 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M10 11v6" />
+  <path d="M14 11v6" />
+  <path d="M19 6v14a2 2 0 0 1-2 2H7a2 2 0 0 1-2-2V6" />
+  <path d="M3 6h18" />
+  <path d="M8 6V4a2 2 0 0 1 2-2h4a2 2 0 0 1 2 2v2" />
+</svg>

src/pygui/ISC/Tabs/icons/excel.svg

@@ -0,0 +1,5 @@
+<svg width="24" height="24" viewBox="0 0 24 24" fill="none" xmlns="http://www.w3.org/2000/svg">
+  <g transform="translate(-1.5, 0)">
+  <path fill-rule="evenodd" clip-rule="evenodd" d="M9.29289 1.29289C9.48043 1.10536 9.73478 1 10 1H18C19.6569 1 21 2.34315 21 4V9C21 9.55228 20.5523 10 20 10C19.4477 10 19 9.55228 19 9V4C19 3.44772 18.5523 3 18 3H11V8C11 8.55228 10.5523 9 10 9H5V20C5 20.5523 5.44772 21 6 21H7C7.55228 21 8 21.4477 8 22C8 22.5523 7.55228 23 7 23H6C4.34315 23 3 21.6569 3 20V8C3 7.73478 3.10536 7.48043 3.29289 7.29289L9.29289 1.29289ZM6.41421 7H9V4.41421L6.41421 7ZM19 12C19.5523 12 20 12.4477 20 13V19H23C23.5523 19 24 19.4477 24 20C24 20.5523 23.5523 21 23 21H19C18.4477 21 18 20.5523 18 20V13C18 12.4477 18.4477 12 19 12ZM11.8137 12.4188C11.4927 11.9693 10.8682 11.8653 10.4188 12.1863C9.96935 12.5073 9.86526 13.1318 10.1863 13.5812L12.2711 16.5L10.1863 19.4188C9.86526 19.8682 9.96935 20.4927 10.4188 20.8137C10.8682 21.1347 11.4927 21.0307 11.8137 20.5812L13.5 18.2205L15.1863 20.5812C15.5073 21.0307 16.1318 21.1347 16.5812 20.8137C17.0307 20.4927 17.1347 19.8682 16.8137 19.4188L14.7289 16.5L16.8137 13.5812C17.1347 13.1318 17.0307 12.5073 16.5812 12.1863C16.1318 11.8653 15.5073 11.9693 15.1863 12.4188L13.5 14.7795L11.8137 12.4188Z" fill="currentColor"/>
+  </g>
+</svg>

src/pygui/ISC/Tabs/icons/file-text.svg

@@ -0,0 +1,17 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M15 2H6a2 2 0 0 0-2 2v16a2 2 0 0 0 2 2h12a2 2 0 0 0 2-2V7Z" />
+  <path d="M14 2v4a2 2 0 0 0 2 2h4" />
+  <path d="M10 9H8" />
+  <path d="M16 13H8" />
+  <path d="M16 17H8" />
+</svg>

src/pygui/ISC/Tabs/icons/folder.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M20 20a2 2 0 0 0 2-2V8a2 2 0 0 0-2-2h-7.9a2 2 0 0 1-1.69-.9L9.6 3.9A2 2 0 0 0 7.93 3H4a2 2 0 0 0-2 2v13a2 2 0 0 0 2 2Z" />
+</svg>

src/pygui/ISC/Tabs/icons/map.svg

@@ -0,0 +1,17 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <rect width="18" height="18" x="3" y="3" rx="2" />
+  <path d="M3 9h18" />
+  <path d="M3 15h18" />
+  <path d="M9 3v18" />
+  <path d="M15 3v18" />
+</svg>

src/pygui/ISC/Tabs/icons/next.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="m9 18 6-6-6-6" />
+</svg>

src/pygui/ISC/Tabs/icons/pause.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <rect x="14" y="3" width="5" height="18" rx="1" />
+  <rect x="6" y="3" width="5" height="18" rx="1" />
+</svg>

src/pygui/ISC/Tabs/icons/play.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <polygon points="6 3 20 12 6 21 6 3" />
+</svg>

src/pygui/ISC/Tabs/icons/prev.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="m15 18-6-6 6-6" />
+</svg>

src/pygui/ISC/Tabs/icons/read.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M2.062 12.348a1 1 0 0 1 0-.696 10.75 10.75 0 0 1 19.876 0 1 1 0 0 1 0 .696 10.75 10.75 0 0 1-19.876 0" />
+  <circle cx="12" cy="12" r="3" />
+</svg>

src/pygui/ISC/Tabs/icons/refresh.svg

@@ -0,0 +1,16 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M3 12a9 9 0 0 1 9-9 9.75 9.75 0 0 1 6.74 2.74L21 8" />
+  <path d="M21 3v5h-5" />
+  <path d="M21 12a9 9 0 0 1-9 9 9.75 9.75 0 0 1-6.74-2.74L3 16" />
+  <path d="M3 21v-5h5" />
+</svg>

src/pygui/ISC/Tabs/icons/rotate-ccw.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M3 12a9 9 0 1 0 9-9 9.75 9.75 0 0 0-6.74 2.74L3 8" />
+  <path d="M3 3v5h5" />
+</svg>

src/pygui/ISC/Tabs/icons/settings.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M9.671 4.136a2.34 2.34 0 0 1 4.659 0 2.34 2.34 0 0 0 3.319 1.915 2.34 2.34 0 0 1 2.33 4.033 2.34 2.34 0 0 0 0 3.831 2.34 2.34 0 0 1-2.33 4.033 2.34 2.34 0 0 0-3.319 1.915 2.34 2.34 0 0 1-4.659 0 2.34 2.34 0 0 0-3.32-1.915 2.34 2.34 0 0 1-2.33-4.033 2.34 2.34 0 0 0 0-3.831A2.34 2.34 0 0 1 6.35 6.051a2.34 2.34 0 0 0 3.319-1.915" />
+  <circle cx="12" cy="12" r="3" />
+</svg>

src/pygui/ISC/Tabs/icons/split.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <rect width="18" height="18" x="3" y="3" rx="2" />
+  <path d="M12 3v18" />
+</svg>

src/pygui/ISC/Tabs/icons/status.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <circle cx="12" cy="12" r="10" />
+  <path d="M12 6v6l4 2" />
+</svg>

src/pygui/ISC/Tabs/icons/stop.svg

@@ -0,0 +1,13 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <rect width="18" height="18" x="3" y="3" rx="2" />
+</svg>

src/pygui/ISC/Tabs/icons/triangle-alert.svg

@@ -0,0 +1,15 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="m21.73 18-8-14a2 2 0 0 0-3.46 0l-8 14A2 2 0 0 0 4 21h16a2 2 0 0 0 1.73-3Z" />
+  <path d="M12 9v4" />
+  <path d="M12 17h.01" />
+</svg>

src/pygui/ISC/Tabs/icons/x.svg

@@ -0,0 +1,14 @@
+<svg
+  xmlns="http://www.w3.org/2000/svg"
+  width="24"
+  height="24"
+  viewBox="0 0 24 24"
+  fill="none"
+  stroke="currentColor"
+  stroke-width="2"
+  stroke-linecap="round"
+  stroke-linejoin="round"
+>
+  <path d="M18 6 6 18" />
+  <path d="m6 6 12 12" />
+</svg>

src/pygui/ISC/Tabs/qmldir

@@ -1,9 +1,7 @@
 # ===== ISC Tabs Module =====
 module ISC.Tabs
 
-GraphTab 1.0 GraphTab.qml
 WaferMapTab 1.0 WaferMapTab.qml
 DataTab 1.0 DataTab.qml
 SettingsTab 1.0 SettingsTab.qml
 StatusTab 1.0 StatusTab.qml
-SelectFileDialog 1.0 SelectFileDialog.qml

src/pygui/ISC/Theme.qml

@@ -7,110 +7,191 @@ import QtQuick
 // =============================================================================
 //  Sections:
 //    1.  Mode flag
-//    2.  Tone palette          (raw tones; everything else derives from these)
+//    2.  Typography              (families, pixel sizes, weights)
-//    3.  Surfaces              (page / card / panel / workspace backgrounds)
+//    3.  Motion
-//    4.  Borders
+//    4.  Tone palette            (raw tones; everything else derives from these)
-//    5.  Text                  (headings, body, panel titles)
+//    5.  Surfaces                (page / card / panel / workspace backgrounds)
-//    6.  Controls              (fields, buttons, checkbox)
+//    6.  Borders
-//    7.  Tracks                (pill toggle + scrollbar)
+//    7.  Text                    (headings, body, panel titles)
-//    8.  Tabs                  (footer tab bar)
+//    8.  Controls                (fields, buttons, checkbox, toggle)
-//    9.  Side rail
+//    9.  Interaction overlays    (hover / active washes — mode-aware)
-//   10.  Status                (success / warning / error)
+//   10.  Tracks                  (pill toggle + scrollbar)
-//   11.  Geometry              (radius / border width / spacing / sizing)
+//   11.  Tabs                    (mode toggle pills)
+//   12.  Side rail
+//   13.  Transport / toolbar
+//   14.  Status & badges         (success / warning / error, badge text)
+//   15.  Sensor bands            (wafer map dots)
+//   16.  Wafer family badges     (source list avatars + accent bars)
+//   17.  Comparison & charts     (metric grading, diff accent, canvas grid)
+//   18.  Geometry                (radius / border width / spacing / sizing)
 // =============================================================================
+//  Based on Codex themes:
+//    Dark  (oscurange):  surface #0B0B0F, ink #E6E6E6
+//    Light (absolutely): surface #F9F9F7, ink #2D2D2B
+//    Accent (both): #F9B98C
 
 QtObject {
     // ── 1. Mode ──────────────────────────────────────────────────────────────
     property bool isDarkMode: true
 
-    // ── 2. Tone palette (base values; consume via semantic tokens below) ─────
+    // ── 2. Typography ────────────────────────────────────────────────────────
-    readonly property color tone100: isDarkMode ? "#111111" : "#FAFAFA"
+    readonly property string uiFontFamily: "Geist, Inter, system-ui, -apple-system, BlinkMacSystemFont, sans-serif"
-    readonly property color tone150: isDarkMode ? "#161616" : "#F6F6F6"
+    readonly property string codeFontFamily: "\"Geist Mono\", ui-monospace, \"SFMono-Regular\", monospace"
-    readonly property color tone200: isDarkMode ? "#1A1A1A" : "#F0F0F0"
-    readonly property color tone250: isDarkMode ? "#212121" : "#EAEAEA"
-    readonly property color tone300: isDarkMode ? "#282828" : "#E2E2E2"
-    readonly property color tone350: isDarkMode ? "#303030" : "#D6D6D6"
-    readonly property color toneText: isDarkMode ? "#F2F2F2" : "#111111"
-    readonly property color toneMute: isDarkMode ? "#A8A8A8" : "#8A8A8A"
-    readonly property color toneBorder: isDarkMode ? "#2E2E2E" : "#D4D4D4"
 
-    // ── 3. Surfaces ──────────────────────────────────────────────────────────
+    // pixelSize scale — map to closest token, tune globally
+    readonly property int font2xs: 9   // tiny metadata
+    readonly property int fontXs: 11   // captions, micro labels
+    readonly property int fontSm: 13   // sidebar labels, secondary
+    readonly property int fontMd: 14   // body, field values
+    readonly property int fontLg: 16   // section headers
+    readonly property int fontXl: 20   // panel / dialog titles
+    readonly property int font2xl: 24  // hero titles
+    readonly property int font3xl: 30  // display
+
+    readonly property int fontWeightRegular: 400
+    readonly property int fontWeightMedium: 500
+    readonly property int fontWeightBold: 700
+
+    // ── 3. Motion ────────────────────────────────────────────────────────────
+    readonly property int durationFast: 120   // micro-interactions (focus ring, hover flash)
+    readonly property int durationBase: 180   // standard transitions (pill switch, row select)
+    readonly property int durationSlow: 260   // larger transitions (panel open/close)
+    readonly property var easeStandard: Easing.OutCubic
+
+    // ── 4. Tone palette (Codex theme v1 inspired) ────────────────────────────
+    readonly property color themeSurface: isDarkMode ? "#0B0B0F" : "#F9F9F7"
+    readonly property color themeInk: isDarkMode ? "#E6E6E6" : "#2D2D2B"
+    readonly property color themeAccent: isDarkMode ? "#F9B98C" : "#B87333"
+    readonly property color themeSkill: isDarkMode ? "#479FFA" : "#3B82F6"   // blue family both modes
+    readonly property color themeAdded: isDarkMode ? "#40C977" : "#00C853"
+    readonly property color themeRemoved: isDarkMode ? "#FA423E" : "#FF5F38"
+    readonly property color themeViolet: isDarkMode ? "#A78BFA" : "#8B5CF6"
+
+    readonly property color tone100: themeSurface
+    readonly property color tone150: isDarkMode ? "#101014" : "#F3F3F1"
+    readonly property color tone200: isDarkMode ? "#151518" : "#EEEEEC"
+    readonly property color tone250: isDarkMode ? "#1B1B1F" : "#E8E8E6"
+    readonly property color tone300: isDarkMode ? "#222228" : "#E0E0DE"
+    readonly property color tone350: isDarkMode ? "#2B2B32" : "#D7D7D4"
+    readonly property color toneText: themeInk
+    readonly property color toneMute: isDarkMode ? "#A8A8A1" : "#85857E"
+    readonly property color toneBorder: isDarkMode ? "#2D2D34" : "#D2D2CE"
+
+    // ── 5. Surfaces ──────────────────────────────────────────────────────────
     readonly property color pageBackground: tone100
-    readonly property color cardBackground: tone200
+    readonly property color cardBackground: tone150
-    readonly property color panelBackground: tone200
+    readonly property color panelBackground: tone150
-    readonly property color workspaceBackground: tone200
+    readonly property color workspaceBackground: tone150
-    readonly property color responseBackground: tone200
+    readonly property color responseBackground: tone150
-    readonly property color subtleSectionBackground: tone300
+    readonly property color subtleSectionBackground: tone250
 
-    // ── 4. Borders ───────────────────────────────────────────────────────────
+    // ── 6. Borders ───────────────────────────────────────────────────────────
     readonly property color cardBorder: toneBorder
-    readonly property color cardSurfaceBorder: isDarkMode ? "#3C3C3C" : "#C8C8C8"
+    readonly property color cardSurfaceBorder: isDarkMode ? "#3A3A42" : "#C7C7C2"
     readonly property color responseBorder: toneBorder
     readonly property color workspaceBorder: toneBorder
     readonly property color innerFrameBorder: toneBorder
-    readonly property color outerFrameBorder: isDarkMode ? "#383838" : "#CACACA"
+    readonly property color outerFrameBorder: isDarkMode ? "#3A3A42" : "#C7C7C2"
-    readonly property color softBorder: isDarkMode ? "#252525" : "#E0E0E0"
+    readonly property color softBorder: isDarkMode ? "#24242A" : "#E4E4E1"
 
-    // ── 5. Text ──────────────────────────────────────────────────────────────
+    // ── 7. Text ──────────────────────────────────────────────────────────────
     readonly property color headingColor: toneText
     readonly property color bodyColor: toneMute
     readonly property color subheadingColor: toneMute
     readonly property color panelTitleText: toneMute
     readonly property color disabledText: toneMute
 
-    // ── 6. Controls ──────────────────────────────────────────────────────────
+    // ── 8. Controls ──────────────────────────────────────────────────────────
     // Fields
-    readonly property color fieldBackground: tone100
+    readonly property color fieldBackground: isDarkMode ? "#101014" : "#FFFFFF"
     readonly property color fieldText: toneText
     readonly property color fieldPlaceholder: toneMute
     readonly property color fieldBorder: toneBorder
-    readonly property color fieldBorderFocus: toneText
+    readonly property color fieldBorderFocus: themeAccent
     // Neutral buttons
-    readonly property color buttonNeutralBackground: tone300
+    readonly property color buttonNeutralBackground: tone250
-    readonly property color buttonNeutralHover: isDarkMode ? "#303030" : "#DDDDDD"
+    readonly property color buttonNeutralHover: tone300
-    readonly property color buttonNeutralPressed: tone100
+    readonly property color buttonNeutralPressed: isDarkMode ? "#0F0F13" : "#FFFFFF"
     readonly property color buttonNeutralText: toneText
     readonly property color buttonPressed: tone300
-    readonly property color primaryAccent: toneText
+    readonly property color primaryAccent: themeAccent
     // Checkbox
     readonly property color checkboxText: toneText
+    // Toggle switch thumb (white knob reads on both track colors)
+    readonly property color toggleThumb: "#FFFFFF"
 
-    // ── 7. Tracks (pill toggle, scrollbar thumb) ─────────────────────────────
+    // ── 9. Interaction overlays ──────────────────────────────────────────────
-    readonly property color trackBackground: isDarkMode ? "#25252B" : "#D1D5DB"
+    // Mode-aware washes. Never use raw Qt.rgba(1,1,1,x) in views: a white
+    // overlay is invisible on light-mode surfaces.
+    readonly property color listHoverBackground: isDarkMode ? Qt.rgba(1, 1, 1, 0.04) : Qt.rgba(0, 0, 0, 0.03)
+    readonly property color listActiveBackground: isDarkMode ? Qt.rgba(1, 1, 1, 0.06) : Qt.rgba(0, 0, 0, 0.05)
+    readonly property color flatButtonHover: isDarkMode ? Qt.rgba(1, 1, 1, 0.08) : Qt.rgba(0, 0, 0, 0.06)
+    readonly property color cardWash: isDarkMode ? Qt.rgba(1, 1, 1, 0.02) : Qt.rgba(0, 0, 0, 0.02)
 
-    // ── 8. Tabs (footer tab bar) ─────────────────────────────────────────────
+    // ── 10. Tracks (pill toggle, scrollbar thumb) ────────────────────────────
-    readonly property color tabBarBackground: tone200
+    readonly property color trackBackground: isDarkMode ? "#25252B" : "#E2E2DE"
-    readonly property color tabBackground: "transparent"
-    readonly property color tabActiveBackground: isDarkMode ? "#333333" : "#FFFFFF"
-    readonly property color tabHoverBackground: tone300
-    readonly property color tabBorder: "transparent"
-    readonly property color tabText: toneMute
-    readonly property color tabActiveText: toneText
 
-    // ── 9. Side rail ─────────────────────────────────────────────────────────
+    // ── 11. Tabs (mode toggle pills) ─────────────────────────────────────────
-    readonly property color sideRailBackground: tone200
+    readonly property color tabActiveBackground: isDarkMode ? "#25252B" : "#FFFFFF"
-    readonly property color sideActiveBackground: tone300
 
-    // ── 10a. Transport / toolbar surfaces ────────────────────────────────────
+    // ── 12. Side rail ────────────────────────────────────────────────────────
-    readonly property color transportBackground:  isDarkMode ? "#0D0D0D" : "#E8E8E8"
+    readonly property color sideRailBackground: tone150
-    readonly property color transportButtonBg:    isDarkMode ? "#2A2A2A" : "#D4D4D4"
+    readonly property color sidePanelBackground: isDarkMode ? "#151518" : "#F3F3F1"
-    readonly property color transportButtonHover: isDarkMode ? "#3A3A3A" : "#C4C4C4"
+    readonly property color sideActiveBackground: isDarkMode ? "#25252B" : "#FFFFFF"
-    readonly property color liveColor:   isDarkMode ? "#22C55E" : "#16A34A"
+    readonly property color sideBorder: toneBorder
-    readonly property color recordColor: isDarkMode ? "#EF4444" : "#DC2626"
+    readonly property color sideMutedText: toneMute
 
-    // ── 10. Status ───────────────────────────────────────────────────────────
+    // ── 13. Transport / toolbar surfaces ─────────────────────────────────────
-    readonly property color statusSuccessColor: isDarkMode ? "#63D471" : "#2E9E44"
+    readonly property color transportButtonBg: tone250
-    readonly property color statusWarningColor: isDarkMode ? "#F5C15C" : "#C88A18"
+    readonly property color transportButtonHover: tone300
-    readonly property color statusErrorColor: isDarkMode ? "#FF6B6B" : "#D64545"
+    readonly property color liveColor: themeAdded
+    readonly property color recordColor: themeRemoved
 
-    // -- 10b. Sensor bands (wafer map dots)
+    // ── 14. Status & badges ──────────────────────────────────────────────────
+    readonly property color statusSuccessColor: themeAdded
+    readonly property color statusWarningColor: isDarkMode ? "#E8A817" : "#B8860B"   // amber/yellow, separate from accent
+    readonly property color statusErrorColor: themeRemoved
+    // Text placed ON a filled status pill / saturated chip:
+    readonly property color statusBadgeText: "#111111"   // dark ink on bright status fills, both modes
+    readonly property color textOnColor: "#FFFFFF"       // white text on deep saturated fills (avatars etc.)
+    // Error banner (soft red surface + readable red text)
+    readonly property color errorSurface: Qt.alpha(statusErrorColor, 0.15)
+    readonly property color errorTextSoft: isDarkMode ? "#FCA5A5" : "#B91C1C"
+
+    // ── 15. Sensor bands (wafer map dots) ────────────────────────────────────
     readonly property color sensorInRange: statusSuccessColor
+    // ponytail: high-temp shares error red — semantically correct (dangerous value),
+    // re-hue if colorblind testing demands a different channel.
     readonly property color sensorHigh: statusErrorColor
-    readonly property color sensorLow: isDarkMode ? "#5B9DF5" : "#2F6FE0"
+    readonly property color sensorLow: themeSkill
     readonly property color waferRingColor: toneBorder
     readonly property color waferAxisColor: softBorder
 
-    // ── 11. Geometry ─────────────────────────────────────────────────────────
+    // ── 16. Wafer family badges (SourcePanel list) ───────────────────────────
+    // Accent = left bar / outline shade; Fill = avatar circle behind textOnColor.
+    // Family grouping mirrors FileBrowser's waferType first-letter convention.
+    readonly property color familyBlueAccent: "#3B82F6"    // A / E / P
+    readonly property color familyBlueFill: "#1D4ED8"
+    readonly property color familyGreenAccent: "#10B981"   // B / C / D
+    readonly property color familyGreenFill: "#065F46"
+    readonly property color familyVioletAccent: "#8B5CF6"  // Z
+    readonly property color familyVioletFill: "#7C3AED"
+    readonly property color familyNeutralFill: "#374151"   // unknown family
+
+    // ── 17. Comparison & charts ──────────────────────────────────────────────
+    // Metric grading for DTW readout cards (good → caution → bad).
+    // Dark values are pastel (readable on tone150); light values are deepened
+    // so they still pass on near-white cards.
+    readonly property color metricGood: isDarkMode ? "#6EE7B7" : "#059669"
+    readonly property color metricWarn: isDarkMode ? "#FDE047" : "#B45309"
+    readonly property color metricBad: isDarkMode ? "#EF4444" : "#DC2626"
+    // DIFF column accent in ReadoutPanel
+    readonly property color diffAccent: themeViolet
+    // Canvas chart primitives (DTW plot grid + axis labels)
+    readonly property color chartGridLine: isDarkMode ? Qt.rgba(1, 1, 1, 0.08) : Qt.rgba(0, 0, 0, 0.10)
+    readonly property color chartAxisText: isDarkMode ? Qt.rgba(1, 1, 1, 0.35) : Qt.rgba(0, 0, 0, 0.45)
+
+    // ── 18. Geometry ─────────────────────────────────────────────────────────
     // Radius
     readonly property int radiusXs: 6   // fields, tight elements
     readonly property int radiusSm: 8   // buttons
@@ -124,17 +205,15 @@ QtObject {
     readonly property int rightPaneGap: 6
     readonly property int panelPadding: 12
     // Side rail layout
-    readonly property int sideRailWidth: 190
+    readonly property int sideRailWidth: 300
-    readonly property int sideRailSpacing: 14
+    readonly property int rightRailWidth: 280
-    readonly property int sideButtonHeight: 146
+    readonly property int sideRailMargin: 16
-    readonly property int sideButtonMinHeight: 88
+    readonly property int sideRailSpacing: 16
-    // Tab bar layout
+    readonly property int sideButtonHeight: 44
-    readonly property int tabBarHeight: 34
+    readonly property int sidePanelRadius: 10
-    readonly property int tabBarPadding: 6
+    readonly property int sideFooterConnection: 100
-    readonly property int tabSpacing: 2
+    readonly property int sideFooterUtility: 46
-    readonly property int tabRadius: 8
+    readonly property int sidePillHeight: 54
-    readonly property int tabFontSize: 12
-    readonly property int tabButtonMinWidth: 80
     // Settings page layout
     readonly property int settingsPanelMaxWidth: 760
     readonly property int settingsOuterMargin: 40

src/pygui/ISC/qmldir

@@ -4,6 +4,7 @@ module ISC
 # ===== Root Components =====
 Main 1.0 Main.qml
 HomePage 1.0 HomePage.qml
+AboutDialog 1.0 AboutDialog.qml
 
 # ===== Singleton Theme =====
 singleton Theme 1.0 Theme.qml

src/pygui/__main__.py

@@ -1,5 +1,6 @@
 import logging
 import sys
+from importlib.metadata import PackageNotFoundError, version
 from pathlib import Path
 
 from PySide6.QtQml import QQmlApplicationEngine
@@ -8,11 +9,22 @@ from PySide6.QtWidgets import QApplication
 
 from pygui.backend.controllers.device_controller import DeviceController
 from pygui.backend.controllers.session_controller import SessionController
+from pygui.backend.data.constants import default_data_dir
 from pygui.backend.data.file_browser import FileBrowser
 from pygui.backend.data.local_settings import LocalSettings
 from pygui.backend.data.local_settings_model import LocalSettingsModel
+from pygui.backend.license.license_model import LicenseModel
 
 # Importing wafer_map_item + trend_chart_item registers @QmlElement types (QML: import ISC.Wafer).
+from pygui.backend.visualization import (
+    graph_quick_item as graph_quick_item,  # noqa: F401
+)
+from pygui.backend.visualization import (
+    trend_chart_item as trend_chart_item,  # noqa: F401
+)
+from pygui.backend.visualization import (
+    wafer_map_item as wafer_map_item,  # noqa: F401
+)
 
 
 # ===== Application Entry Point =====
@@ -30,34 +42,49 @@ def main() -> int:
     app = QApplication(sys.argv)
     engine = QQmlApplicationEngine()
 
-    # ===== Shared Models =====
+    # ===== Shared Settings =====
-    settings_model = LocalSettingsModel()
+    # One LocalSettings instance, one disk read. LocalSettingsModel and
+    # DeviceController both hold this same object, so a save from the
+    # Settings tab is visible to the device layer immediately — no reload,
+    # no second copy to go stale.
+    data_dir = str(default_data_dir())
+    raw_settings = LocalSettings.read_settings(data_dir)
+
+    settings_model = LocalSettingsModel(raw_settings, data_dir)
     select_file_dialog_model = FileBrowser()
     settings_model.loadSettings()
     engine.rootContext().setContextProperty("settingsModel", settings_model)
     engine.rootContext().setContextProperty("file_browser", select_file_dialog_model)
 
+    # App version from package metadata so the About dialog can't drift
+    # from pyproject.toml.
+    try:
+        app_version = version("pygui")
+    except PackageNotFoundError:
+        app_version = "dev"
+    engine.rootContext().setContextProperty("appVersion", app_version)
+
     # ===== Device Controller (serial comm) =====
-    data_dir = str(settings_model._data_dir)
+    # TODO P1.1: construct LicenseModel BEFORE DeviceController and pass
-    raw_settings = LocalSettings.read_settings(data_dir)
+    #   license_lookup=license_model.levelForWafer into the ctor.
+    #   THINKING: controller must answer "is this serial licensed?" at
+    #   read/erase time (P2.1); a bound Callable[[str], str] avoids a
+    #   LicenseModel import in the controller and keeps it testable with a
+    #   lambda. See docs/pending/license-gating-plan.md §1.1.
     device_controller = DeviceController(raw_settings, data_dir)
     engine.rootContext().setContextProperty("deviceController", device_controller)
 
+    # Source panel browses the same folder recordings/reads are saved to.
+    select_file_dialog_model.setCurrentDirectory(str(device_controller.saveDataDir))
+
+    # ===== License Model (About dialog grid, replay trial) =====
+    license_model = LicenseModel(data_dir)
+    engine.rootContext().setContextProperty("licenseModel", license_model)
+
     # ===== Session Controller (live/review wafer dashboard) =====
-    raw_settings_dict = raw_settings.__dict__.copy() if hasattr(raw_settings, '__dict__') else {}
+    stream_controller = SessionController()
-    stream_controller = SessionController(settings=raw_settings_dict)
     engine.rootContext().setContextProperty("streamController", stream_controller)
 
-    # Persist session state back to settings when it changes
-    def _persist_session_settings():
-        session_state = stream_controller.collect_settings()
-        for k, v in session_state.items():
-            if hasattr(raw_settings, k):
-                setattr(raw_settings, k, v)
-        LocalSettings.save_settings(data_dir, raw_settings)
-
-    stream_controller.settingsChanged.connect(_persist_session_settings)
-
     # ===== QML Startup =====
     # The "ISC" QML module lives alongside this file (src/pygui/ISC), so the
     # package directory is the import path the engine searches for qmldir.

src/pygui/backend/__init__.py

@@ -1,26 +0,0 @@
-# ===== Backend Package =====
-# Backward-compatible re-exports so existing callers keep working
-# while imports are migrated to the new sub-package paths.
-
-from pygui.backend.controllers.device_controller import DeviceController  # noqa: F401
-from pygui.backend.controllers.session_controller import SessionController  # noqa: F401
-from pygui.backend.data.csv_file_metadata import CSVFileMetadata  # noqa: F401
-from pygui.backend.data.csv_recorder import CsvRecorder  # noqa: F401
-from pygui.backend.data.data_records import read_data_records  # noqa: F401
-from pygui.backend.data.file_browser import FileBrowser  # noqa: F401
-from pygui.backend.data.local_settings import LocalSettings  # noqa: F401
-from pygui.backend.data.local_settings_model import LocalSettingsModel  # noqa: F401
-from pygui.backend.models.data_model import TemperatureTableModel  # noqa: F401
-from pygui.backend.models.frame import Frame  # noqa: F401
-from pygui.backend.models.frame_player import FramePlayer, frames_from_wafer_data  # noqa: F401
-from pygui.backend.models.frame_stats import Stats, compute_stats  # noqa: F401
-from pygui.backend.models.sensor_editor import SensorEditor  # noqa: F401
-from pygui.backend.models.session_model import SessionModel  # noqa: F401
-from pygui.backend.models.stability_detector import StabilityDetector  # noqa: F401
-from pygui.backend.models.threshold_classifier import ThresholdConfig  # noqa: F401
-from pygui.backend.visualization.graph_view import GraphView  # noqa: F401
-from pygui.backend.visualization.rbf_heatmap import interpolate_field  # noqa: F401
-from pygui.backend.visualization.wafer_map_item import WaferMapItem  # noqa: F401
-from pygui.backend.wafer.wafer_layouts import available_families, load_layout  # noqa: F401
-from pygui.backend.wafer.zwafer_models import DataRecord, Sensor, ZWaferData  # noqa: F401
-from pygui.backend.wafer.zwafer_parser import ZWaferParser  # noqa: F401

src/pygui/backend/controllers/__init__.py

@@ -1,5 +0,0 @@
-# ===== Controllers Sub-package =====
-from pygui.backend.controllers.device_controller import DeviceController
-from pygui.backend.controllers.session_controller import SessionController
-
-__all__ = ["DeviceController", "SessionController"]

src/pygui/backend/controllers/device_controller.py

@@ -3,31 +3,30 @@
 from __future__ import annotations
 
 import logging
+import os
+import subprocess
+import sys
 import threading
 from datetime import datetime
+from pathlib import Path
 from typing import Any, Optional
 
 from PySide6.QtCore import Property, QObject, Qt, Signal, Slot
 
-from pygui.backend.controllers.session_controller import SessionController
 from pygui.backend.data.local_settings import LocalSettings
 from pygui.backend.models.data_model import TemperatureTableModel
 from pygui.backend.utils import slot_error_boundary
 from pygui.backend.visualization.graph_view import GraphView
 from pygui.serialcomm.data_parser import (
+    convert_to_debug_temperatures,
     convert_to_temperatures,
     parse_binary_data,
     remove_trailing_zeros,
+    save_debug_csv,
     save_to_csv,
 )
-from pygui.serialcomm.device_service import DeviceService
 from pygui.serialcomm.serial_port import WaferInfo
 
-# import pygui.backend.wafer_map_item
-
-stream_controller = SessionController()
-# engine.rootContext().setContextProperty("streamController", stream_controller)
-
 log = logging.getLogger(__name__)
 
 
@@ -39,11 +38,15 @@ class DeviceController(QObject):
 
     # ---- public signals ----
     portsUpdated = Signal(list)
+    connectionStatusChanged = Signal()
+    operationInProgressChanged = Signal()
+    waferDetectedChanged = Signal()
+    selectedPortChanged = Signal()
     detectResult = Signal(object)  # WaferInfo dict or None
-    readResult = Signal(object)  # {"success": bool, "bytes": int} or {"error": str}
+    readResult = Signal(dict)  # {"success": bool, "bytes": int} or {"error": str}
-    eraseResult = Signal(object)  # {"success": bool}
+    eraseResult = Signal(dict)  # {"success": bool}
-    debugResult = Signal(object)  # {"success": bool, "sensor_bytes": int, "debug_bytes": int}
+    debugResult = Signal(dict)  # {"success": bool, "sensor_bytes": int, "debug_bytes": int}
-    parsedDataReady = Signal(object)  # {"success": bool, "rows": int, "cols": int, "data": ..., "csv_path": str}
+    parsedDataReady = Signal(dict)  # {"success": bool, "rows": int, "cols": int, "data": ..., "csv_path": str}
     statusRestored = Signal()  # Emitted when status is restored from previous session
     logMessage = Signal(str)
     activityLogUpdated = Signal(str)
@@ -51,48 +54,48 @@ class DeviceController(QObject):
     # ---- private signals (marshal worker-thread results back to main thread) ----
     _detectFinished = Signal(object, object)     # (port_or_None, WaferInfo_or_None)
     _readFinished = Signal(str, str, object)     # (port, family_code, bytes_or_None)
+    _eraseFinished = Signal(bool)                # (success)
+    _debugFinished = Signal(dict)                # (result_dict)
 
     def __init__(self, settings: LocalSettings, data_dir: str, parent: QObject | None = None) -> None:
         super().__init__(parent)
         self._settings = settings
         self._data_dir = data_dir
+        from pygui.serialcomm.device_service import DeviceService
         self._service = DeviceService(settings)
 
-        # Always start fresh — never restore connection status from a prior session
+        # Always start fresh — never restore connection status or logs from a prior session
         self._connection_status = "Disconnected"
         self._operation_in_progress = False
-        self._activity_log: list[str] = getattr(settings, 'activity_log', [])
+        self._activity_log: list[str] = []
         self._raw_bytes: Optional[bytes] = None
-        from pathlib import Path
         self._save_data_dir: str = getattr(settings, 'save_data_dir', "") or str(Path(self._data_dir) / "csv")
-        self._last_wafer_info: dict[str, Any] = getattr(settings, 'last_wafer_info', {})
+        # TODO P1.2: accept ctor param license_lookup: Callable[[str], str]
-        self._last_csv_path: str = getattr(settings, 'last_csv_path', "")
+        #   (default lambda s: "") and add:
-        self._selected_port: str = getattr(settings, 'selected_port', "")
+        #     def _wafer_license_level(self) -> str:
-        self._data_row_count: int = getattr(settings, 'data_row_count', 0)
+        #         return self._license_lookup(self._last_wafer_info.get("serialNumber", ""))
-        self._data_col_count: int = getattr(settings, 'data_col_count', 0)
+        #   plus @Slot(result=bool) waferLicensed() for QML (used by P2.2).
+        #   THINKING: single shared guard — per-call-site checks are the
+        #   sibling-caller bug (fix read, forget erase). Empty serial → ""
+        #   → denied = safe default. Called by P2.1.
+        #   See docs/pending/license-gating-plan.md §1.2.
+        self._last_wafer_info: dict[str, Any] = {}
+        self._wafer_detected: bool = False
+        self._last_csv_path: str = ""
+        self._selected_port: str = ""
+        self._data_row_count: int = 0
+        self._data_col_count: int = 0
         self._data_model = TemperatureTableModel(self)
         self._graph_view = GraphView(self)
 
-        # If we have persisted activity log, emit it to QML
-        if self._activity_log:
-            self.activityLogUpdated.emit("\n".join(self._activity_log))
-
-        # Log status restoration and emit signal for UI updates
-        if self._connection_status != "Disconnected" or self._selected_port or self._last_wafer_info:
-            self._append_log("Restored previous session status")
-            if self._selected_port:
-                self._append_log(f"Last selected port: {self._selected_port}")
-            if self._last_wafer_info:
-                info = self._last_wafer_info
-                self._append_log(f"Last wafer: {info.get('serialNumber', 'Unknown')} ({info.get('familyCode', 'Unknown')})")
-            self.statusRestored.emit()
-
         # Reset connection status on fresh start
         self._connection_status = "Disconnected"
 
         # Marshal worker-thread results onto the Qt main thread.
         self._detectFinished.connect(self._handle_detect_finished, Qt.ConnectionType.QueuedConnection)
         self._readFinished.connect(self._handle_read_finished, Qt.ConnectionType.QueuedConnection)
+        self._eraseFinished.connect(self._handle_erase_finished, Qt.ConnectionType.QueuedConnection)
+        self._debugFinished.connect(self._handle_debug_finished, Qt.ConnectionType.QueuedConnection)
 
         root_logger = logging.getLogger()
         root_logger.addHandler(QmlActivityLogHandler(self))
@@ -108,18 +111,23 @@ class DeviceController(QObject):
         """Update connection status and notify QML."""
         if self._connection_status != status:
             self._connection_status = status
-            self.portsUpdated.emit(self.availablePorts)
+            self.connectionStatusChanged.emit()
 
-    @Property(str, notify=portsUpdated)
+    @Property(str, notify=connectionStatusChanged)
     def connectionStatus(self) -> str:
         """Current connection status string for display."""
         return self._connection_status
 
-    @Property(bool, notify=portsUpdated)
+    @Property(bool, notify=operationInProgressChanged)
     def operationInProgress(self) -> bool:
         """Whether a hardware operation is currently running."""
         return self._operation_in_progress
 
+    @Property(str, notify=activityLogUpdated)
+    def activityLog(self) -> str:
+        """Full activity log text; survives QML tab reloads."""
+        return "\n".join(self._activity_log)
+
     @Property(str, notify=activityLogUpdated)
     def saveDataDir(self) -> str:
         """Directory where parsed CSV data files are saved."""
@@ -133,7 +141,43 @@ class DeviceController(QObject):
         self._append_log(f"Save data dir set to: {path}")
         self._save_status()
 
-    @Property(str, notify=portsUpdated)
+    @Slot(result=str)
+    @slot_error_boundary
+    def exportDir(self) -> str:
+        """Ensure and return the Export subfolder under saveDataDir."""
+        path = Path(self._save_data_dir) / "Export"
+        path.mkdir(parents=True, exist_ok=True)
+        return str(path)
+
+    @Slot(str)
+    @slot_error_boundary
+    def openCsvFile(self, file_path: str) -> None:
+        """Open a CSV file in the system default spreadsheet application."""
+
+        if not file_path:
+            self._append_log("No file path provided to openCsvFile")
+            return
+
+        try:
+            path = Path(file_path)
+            if not path.exists():
+                self._append_log(f"File not found: {file_path}")
+                return
+
+            # Platform-appropriate file opener
+            if sys.platform == "darwin":
+                subprocess.Popen(["open", str(path)])
+            elif sys.platform == "linux":
+                subprocess.Popen(["xdg-open", str(path)])
+            else:  # Windows
+                os.startfile(str(path))
+
+            self._append_log(f"Opened file: {file_path}")
+        except Exception as exc:
+            log.warning("Failed to open file %s: %s", file_path, exc)
+            self._append_log(f"Error opening file: {exc}")
+
+    @Property(str, notify=selectedPortChanged)
     def selectedPort(self) -> str:
         """Currently selected serial port shared across the UI."""
         return self._selected_port
@@ -142,7 +186,9 @@ class DeviceController(QObject):
     @slot_error_boundary
     def setSelectedPort(self, port: str) -> None:
         """Set the active serial port from the port selector."""
+        if self._selected_port != port:
             self._selected_port = port
+            self.selectedPortChanged.emit()
             self._save_status()
 
     @Property(int, notify=parsedDataReady)
@@ -162,15 +208,33 @@ class DeviceController(QObject):
         Returns [familyCode, serialNumber, sensorCount, mfgDateHex, runtime, cycleCount].
         """
         info = self._last_wafer_info
+        family_code = info.get("familyCode", "")
+        sensor_count = info.get("sensorCount", 0)
+        from pygui.serialcomm.data_parser import csv_column_count
+        mapped_count = csv_column_count(family_code)
+        if mapped_count > 0:
+            sensor_count = mapped_count
+
         return [
-            info.get("familyCode", ""),
+            family_code,
             info.get("serialNumber", ""),
-            info.get("sensorCount", 0),
+            sensor_count,
             info.get("mfgDateHex", ""),
             info.get("runtime", 0),
             info.get("cycleCount", 0),
         ]
 
+    @Property(bool, notify=waferDetectedChanged)
+    def waferDetected(self) -> bool:
+        """Whether a wafer is currently detected and ready for read/erase."""
+        return self._wafer_detected
+
+    def _set_wafer_detected(self, detected: bool) -> None:
+        if self._wafer_detected != detected:
+            self._wafer_detected = detected
+            self.waferDetectedChanged.emit()
+
+
     @Property(object, notify=detectResult)
     def dataModel(self) -> TemperatureTableModel:
         """QAbstractTableModel for the parsed temperature data table."""
@@ -235,25 +299,26 @@ class DeviceController(QObject):
         self._set_connection_status("Disconnected")
         self._selected_port = ""
         self._last_wafer_info = {}
+        self._set_wafer_detected(False)
         self._data_row_count = 0
         self._data_col_count = 0
         self._raw_bytes = None
         self._operation_in_progress = False
+        self._data_model.reset()
+        self._graph_view.resetChart()
+        self._activity_log.clear()
         self.detectResult.emit(None)
+        self.parsedDataReady.emit({"success": False})
         self.portsUpdated.emit(self.availablePorts)
-        self._append_log("Session refreshed/cleared")
+        self.activityLogUpdated.emit("")
         self._save_status()
 
 
     def _set_operation_progress(self, in_progress: bool) -> None:
-        """Set operation progress state and notify QML.
+        """Set operation progress state and notify QML."""
-
+        if self._operation_in_progress != in_progress:
-        portsUpdated is the shared notify signal for availablePorts,
-        connectionStatus, and operationInProgress — emitting it forces
-        QML to re-evaluate all three bindings.
-        """
             self._operation_in_progress = in_progress
-        self.portsUpdated.emit(self._service.enumerate_ports())
+            self.operationInProgressChanged.emit()
 
     # ---- Public Slots ----
 
@@ -261,6 +326,7 @@ class DeviceController(QObject):
     @slot_error_boundary
     def refreshPorts(self) -> None:
         """Scan for available serial ports and emit updated list."""
+        self._service.clear_port_scan_cache()
         ports = self._service.enumerate_ports()
         self._set_connection_status("Disconnected")
         self.portsUpdated.emit(ports)
@@ -280,6 +346,19 @@ class DeviceController(QObject):
             self._append_log("Already busy — ignoring detect request")
             return
 
+        # Clear previous session data & logs for a fresh session
+        self._selected_port = ""
+        self._last_wafer_info = {}
+        self._data_row_count = 0
+        self._data_col_count = 0
+        self._raw_bytes = None
+        self._data_model.reset()
+        self._graph_view.resetChart()
+        self._activity_log.clear()
+        self.detectResult.emit(None)
+        self.selectedPortChanged.emit()
+        self.parsedDataReady.emit({"success": False})
+
         self._set_operation_progress(True)
         self._set_connection_status("Detecting...")
         self.portsUpdated.emit(self._service.enumerate_ports())
@@ -303,23 +382,28 @@ class DeviceController(QObject):
         self, port: Optional[str], info: Optional[WaferInfo]
     ) -> None:
         """Main-thread completion handler for detectWafer."""
+        try:
             if info is not None:
-            self._selected_port = port or ""
+                # Build the dict (can raise) before declaring success, so a
-            self._set_connection_status("Connected")
+                # bad payload can't leave status="Connected" while
-            self._append_log(
+                # waferDetected stays false and Read/Erase stay greyed.
-                f"Detected: {info.serial_number} (family={info.family_code}, "
-                f"port={port}, runtime={info.runtime}s, cycles={info.cycle_count})"
-            )
                 wafer_dict = self._wafer_info_to_dict(info)
+                self._selected_port = port or ""
                 self._last_wafer_info = wafer_dict
+                self._set_wafer_detected(True)
+                self._set_connection_status("Connected")
                 self.detectResult.emit(wafer_dict)
+                self.selectedPortChanged.emit()
                 self._save_status()
             else:
                 self._selected_port = ""
                 self._set_connection_status("Disconnected")
                 self._append_log("No wafer detected on any port")
                 self._last_wafer_info = {}
+                self._set_wafer_detected(False)
                 self.detectResult.emit(None)
+                self.selectedPortChanged.emit()
+        finally:
             self._set_operation_progress(False)
 
     @Slot()
@@ -335,6 +419,16 @@ class DeviceController(QObject):
             self._append_log("Already busy — ignoring read request")
             return
 
+        # TODO P2.1: license guard —
+        #   if self._wafer_license_level() == "":
+        #       self._append_log("Wafer not licensed — load its license .bin (About dialog)")
+        #       self.readResult.emit({"error": "Wafer not licensed"})
+        #       return
+        #   THINKING: this slot is the trust boundary; the QML enabled
+        #   binding (P2.2) is UX only. Reuses existing readResult error
+        #   shape → zero new signals. Depends on P1.2. Same guard goes in
+        #   eraseMemory (emit eraseResult there). See plan §2.1.
+
         if not self._selected_port:
             self._append_log("No wafer detected — run Detect Wafer first")
             self.readResult.emit({"error": "No port — detect wafer first"})
@@ -391,12 +485,36 @@ class DeviceController(QObject):
     @slot_error_boundary
     def eraseMemory(self, port: str) -> None:
         """Send p1 erase command."""
+        if self._operation_in_progress:
+            self._append_log("Already busy — ignoring erase request")
+            return
+
+        # TODO P2.1: same license guard as readMemoryAsync, but emit
+        #   self.eraseResult.emit({"success": False}) on denial. See plan §2.1.
         self._set_operation_progress(True)
         self._set_connection_status("Erasing...")
         self.portsUpdated.emit(self._service.enumerate_ports())
         self._append_log(f"Erase command sent to {port} (wafer takes ~15s) ...")
 
+        threading.Thread(
+            target=self._erase_worker,
+            args=(port,),
+            daemon=True,
+        ).start()
+
+    def _erase_worker(self, port: str) -> None:
+        """Background thread worker for eraseMemory."""
+        try:
             ok = self._service.erase_wafer(port)
+        except Exception as exc:
+            log.exception("Erase worker crashed: %s", exc)
+            ok = False
+        self._eraseFinished.emit(ok)
+
+    @Slot(bool)
+    @slot_error_boundary
+    def _handle_erase_finished(self, ok: bool) -> None:
+        """Main thread completion handler for eraseMemory."""
         if ok:
             self._set_connection_status("Connected")
             self._append_log("Erase command accepted — wait ~15 seconds")
@@ -409,45 +527,83 @@ class DeviceController(QObject):
     @Slot(str)
     @slot_error_boundary
     def readDebug(self, port: str) -> None:
-        """Read both D1 (sensor) and F1 (debug/cold-junction) data.
+        """Read both D1 (sensor) and F1 (debug/cold-junction) data."""
-
+        if self._operation_in_progress:
-        Emits debugResult with counts on success.
+            self._append_log("Already busy — ignoring debug read request")
-        """
+            return
         self._set_operation_progress(True)
         self._set_connection_status("Reading debug...")
         self.portsUpdated.emit(self._service.enumerate_ports())
         self._append_log(f"Reading debug data on {port} ...")
 
+        threading.Thread(
+            target=self._debug_worker,
+            args=(port,),
+            daemon=True,
+        ).start()
+
+    def _debug_worker(self, port: str) -> None:
+        """Background thread worker for readDebug."""
+        try:
             # Step 1: D1 sensor data
             sensor_data = self._service.read_wafer_data(port, family_code="")
             if sensor_data is None:
-            self._set_connection_status("Disconnected")
+                self._debugFinished.emit({"error": "D1 read failed"})
-            self._append_log("D1 read failed — aborting debug read")
-            self.debugResult.emit({"error": "D1 read failed"})
-            self._set_operation_progress(False)
                 return
 
-        self._append_log(f"D1 read: {len(sensor_data)} bytes")
-
             # Step 2: F1 debug data
             debug_data = self._service.read_wafer_data(port, family_code="", cmd="F1")
             if debug_data is None:
-            self._set_connection_status("Disconnected")
+                self._debugFinished.emit({"error": "F1 read failed"})
-            self._append_log("F1 read failed")
-            self.debugResult.emit({"error": "F1 read failed"})
-            self._set_operation_progress(False)
                 return
 
-        self._set_connection_status("Connected")
+            fc = (
-        self._append_log(
+                self._last_wafer_info.get("familyCode", "")
-            f"Debug read complete: {len(sensor_data)} sensor bytes, "
+                if self._last_wafer_info
-            f"{len(debug_data)} debug bytes"
+                else ""
             )
-        self.debugResult.emit({
+            sensor_hex = parse_binary_data(sensor_data, fc)
+            debug_hex = parse_binary_data(debug_data, fc)
+            if not sensor_hex or not debug_hex:
+                self._debugFinished.emit({"error": "Debug binary parse failed"})
+                return
+
+            temp_data = convert_to_temperatures(sensor_hex, fc)
+            debug_temp_data = convert_to_debug_temperatures(debug_hex)
+            csv_path = save_debug_csv(temp_data, debug_temp_data, self._save_data_dir)
+            if csv_path is None:
+                self._debugFinished.emit({"error": "Debug CSV save failed"})
+                return
+
+            self._debugFinished.emit({
                 "success": True,
                 "sensor_bytes": len(sensor_data),
                 "debug_bytes": len(debug_data),
+                "csv_path": csv_path,
             })
+        except Exception as exc:
+            log.exception("Debug worker crashed: %s", exc)
+            self._debugFinished.emit({"error": str(exc)})
+
+    @Slot(dict)
+    @slot_error_boundary
+    def _handle_debug_finished(self, result: dict) -> None:
+        """Main thread completion handler for readDebug."""
+        if result.get("success"):
+            self._set_connection_status("Connected")
+            sensor_bytes = result.get("sensor_bytes", 0)
+            debug_bytes = result.get("debug_bytes", 0)
+            csv_path = result.get("csv_path", "")
+            msg = f"Debug read complete: {sensor_bytes} sensor bytes, {debug_bytes} debug bytes"
+            if csv_path:
+                msg += f", CSV written to {csv_path}"
+            self._append_log(msg)
+        else:
+            self._set_connection_status("Disconnected")
+            err_msg = result.get("error", "Debug read failed")
+            self._append_log(err_msg)
+
+        self.debugResult.emit(result)
         self._set_operation_progress(False)
 
     @Slot(str, str)
@@ -467,7 +623,6 @@ class DeviceController(QObject):
             return
 
         if not self._save_data_dir:
-            from pathlib import Path
             self._save_data_dir = str(Path(self._data_dir) / "csv")
             self._append_log(f"Auto-set save directory to: {self._save_data_dir}")
             self._save_status()
@@ -558,10 +713,16 @@ class DeviceController(QObject):
     @staticmethod
     def _wafer_info_to_dict(info: WaferInfo) -> dict[str, Any]:
         """Convert WaferInfo dataclass to JSON-serialisable dict for QML."""
+        from pygui.serialcomm.data_parser import csv_column_count
+        sensor_count = info.sensor_count
+        mapped_count = csv_column_count(info.family_code)
+        if mapped_count > 0:
+            sensor_count = mapped_count
+
         return {
             "familyCode": info.family_code,
             "serialNumber": info.serial_number,
-            "sensorCount": info.sensor_count,
+            "sensorCount": sensor_count,
             "mfgDateHex": info.mfg_date_hex,
             "runtime": info.runtime,
             "cycleCount": info.cycle_count,
@@ -572,8 +733,9 @@ class QmlActivityLogHandler(logging.Handler):
         super().__init__()
         self._controller = controller
     def emit(self, record: logging.LogRecord) -> None:
-        timestamp = datetime.now().strftime("%H:%M:%S")
-        level = record.levelname
         message = record.getMessage()
-        msg = f"[{timestamp}] {level}: {message}"
+        if "found wafer on" in message:
+            return
+        level = record.levelname
+        msg = f"{level}: {message}"
         self._controller._append_log(msg)

src/pygui/backend/controllers/session_controller.py

@@ -11,12 +11,17 @@ from PySide6.QtCore import Property, QObject, Qt, QTimer, Signal, Slot
 from pygui.backend.cluster_average import average_clusters, group_sensors_by_radius
 from pygui.backend.data.csv_recorder import CsvRecorder
 from pygui.backend.models.frame import Frame
-from pygui.backend.models.frame_player import FramePlayer, frames_from_wafer_data
+from pygui.backend.models.frame_player import (
-from pygui.backend.models.replay_stats import ReplayStatsTracker
+    FramePlayer,
+    all_sensor_series,
+    frames_from_wafer_data,
+)
+from pygui.backend.models.frame_stats import compute_edge_center
 from pygui.backend.models.sensor_editor import SensorEditor
-from pygui.backend.models.session_model import SessionModel
+from pygui.backend.models.session_model import SessionModel, SessionUpdate
 from pygui.backend.models.threshold_classifier import ThresholdConfig
 from pygui.backend.utils import slot_error_boundary
+from pygui.backend.wafer.wafer_layouts import ec_pairs_for_wafer_id
 from pygui.backend.wafer.zwafer_models import Sensor
 from pygui.backend.wafer.zwafer_parser import ZWaferParser
 from pygui.serialcomm.stream_reader import StreamReader
@@ -35,15 +40,22 @@ class SessionController(QObject):
     recordingChanged = Signal()
     sensorsChanged = Signal()
     loadedFileChanged = Signal()
+    loadFileError = Signal(str)
     clusterAveragingEnabledChanged = Signal()
-    settingsChanged = Signal()  # emitted when session state changes that should be persisted
+    liveStatsChanged = Signal()  # emitted when receivedCount or errorCount change
     # trend: per-frame avg for live graph
-    trendData = Signal(str)  # JSON array of floats
+    trendDelta = Signal(str)  # JSON [[elapsed_s, avg]] — one new point per live frame
+    trendReset = Signal()  # live trend buffer cleared (new stream started)
+    # NOTE: dict (QVariantMap), not object — Signal(object) delivers Python
+    # dicts to QML as an opaque empty wrapper with no accessible fields.
+    comparisonResult = Signal(dict)  # dict with success, distance, warping_path, max_sensor_deviation, series_a, series_b
+    splitResult = Signal(dict)  # dict with success, segments
+    segmentExported = Signal(dict)  # dict with success, path | error
     # private: marshal a worker-thread frame onto the main thread
     _liveFrame = Signal(object)    # Frame
+    _liveError = Signal()          # worker-thread error ping
 
-    def __init__(self, parent: QObject | None = None,
+    def __init__(self, parent: QObject | None = None) -> None:
-                 settings: dict | None = None) -> None:
         super().__init__(parent)
         self._mode = MODE_REVIEW
         self._model = SessionModel()
@@ -51,15 +63,9 @@ class SessionController(QObject):
         self._reader: Optional[StreamReader] = None
         self._recorder = CsvRecorder()
         self._sensors: list[Sensor] = []
-        self._last = None              # last SessionUpdate
+        self._last: Optional[SessionUpdate] = None
         self._elapsed = 0.0
-        self._trend_buffer: list[float] = [] # rolling window
+        self._stream_start_time: float = 0.0
-        self._trend_timestamps: list[float] = []  # monotonic timestamps
-
-        # Trend refresh timer - update every 1s
-        self._trend_timer = QTimer(self)
-        self._trend_timer.setInterval(1000)
-        self._trend_timer.timeout.connect(self._flush_trend)
 
         self._play_timer = QTimer(self)
         self._play_timer.timeout.connect(self._advance)
@@ -72,28 +78,21 @@ class SessionController(QObject):
         self._dirty = False
 
         self._liveFrame.connect(self._on_live_frame, Qt.ConnectionType.QueuedConnection)
+        self._liveError.connect(self._on_live_error, Qt.ConnectionType.QueuedConnection)
 
         self._sensor_editor = SensorEditor()
+        self._ec_pairs: tuple[tuple[int, int], ...] = ()
         self._last_raw_frame: Frame | None = None
         self._loaded_file: str = ""
         self._cluster_averaging_enabled = False
         self._active_clusters: list[list[int]] = []
-        self._stats_tracker = ReplayStatsTracker()
+        self._received_count: int = 0
+        self._error_count: int = 0
 
-        # Restore persisted state if available
+        # Comparison cache for dynamic overlap mapping
-        self._load_settings(settings or {})
+        self._compare_recs_a: list = []
-
+        self._compare_recs_b: list = []
-    # ---- persisted settings ----
+        self._compare_alignment_map: dict[int, int] = {}
-
-    def _load_settings(self, settings: dict) -> None:
-        """Restore session state from persisted settings dict."""
-        # Do NOT auto-restore the last session file — always start fresh.
-
-    def collect_settings(self) -> dict:
-        """Return a dict of session state to persist."""
-        return {
-            "session_last_file": self._loaded_file,
-        }
 
     # ---- properties QML binds to ----
     @Property(str, notify=modeChanged)
@@ -105,6 +104,9 @@ class SessionController(QObject):
     @Property(int, notify=frameUpdated)
     def frameTotal(self) -> int: return self._player.total
 
+    @Property(bool, notify=stateChanged)
+    def playing(self) -> bool: return self._play_timer.isActive()
+
     @Property(str, notify=stateChanged)
     def state(self) -> str:
         if self._last:
@@ -131,7 +133,7 @@ class SessionController(QObject):
                         "value": round(v, 2), "band": band, "index": i})
         return out
 
-    @Property("QVariantList", notify=sensorsChanged)
+    @Property("QVariantList", notify=sensorsChanged)  # type: ignore[arg-type]
     def sensorLayout(self) -> list:
         """[{label, x, y, side, offset_x, offset_y}] for WaferMapItem.sensors."""
         return [
@@ -156,14 +158,14 @@ class SessionController(QObject):
         """Wafer size in mm."""
         return getattr(self._sensors, "size", 300.0)
 
-    @Property("QVariantList", notify=frameUpdated)
+    @Property("QVariantList", notify=frameUpdated)  # type: ignore[arg-type]
     def sensorValues(self) -> list:
         """[float] in sensor order."""
         if not self._last:
             return []
         return [round(v, 3) for v in self._last.values]
 
-    @Property("QVariantList", notify=frameUpdated)
+    @Property("QVariantList", notify=frameUpdated)  # type: ignore[arg-type]
     def sensorBands(self) -> list:
         """['in_range'|'high'|'low'] in sensor order."""
         if not self._last:
@@ -185,15 +187,43 @@ class SessionController(QObject):
         if not self._last:
             return {}
         s = self._last.stats
-        return {"min": round(s.min, 2), "minIndex": s.min_index + 1,
+        out = {"min": round(s.min, 2), "minIndex": s.min_index + 1,
                "max": round(s.max, 2), "maxIndex": s.max_index + 1,
                "diff": round(s.diff, 2), "avg": round(s.avg, 2),
                "sigma": round(s.sigma, 2), "threeSigma": round(s.three_sigma, 2)}
+        ec = compute_edge_center(self._last.values, self._ec_pairs,
+                                 self._sensor_editor.replaced_indices())
+        if ec is not None:
+            out.update({
+                "ecMinEdgeIndex": ec.min_edge_index + 1,
+                "ecMinCenterIndex": ec.min_center_index + 1,
+                "ecMinEdgeValue": round(ec.min_edge, 2),
+                "ecMinCenterValue": round(ec.min_center, 2),
+                "ecMinDelta": round(ec.min_delta, 2),
+                "ecMaxEdgeIndex": ec.max_edge_index + 1,
+                "ecMaxCenterIndex": ec.max_center_index + 1,
+                "ecMaxEdgeValue": round(ec.max_edge, 2),
+                "ecMaxCenterValue": round(ec.max_center, 2),
+                "ecMaxDelta": round(ec.max_delta, 2),
+            })
+        return out
 
     @Property(str, notify=loadedFileChanged)
     def loadedFile(self) -> str: return self._loaded_file
 
-    @Property("QVariantList", notify=frameUpdated)
+    @Property(str, notify=loadedFileChanged)
+    def graphSensorNames(self) -> str:
+        """Comma-joined sensor names for the whole-run Graph tab."""
+        names, _ = all_sensor_series(list(self._player.frames))
+        return ",".join(names)
+
+    @Property(str, notify=loadedFileChanged)
+    def graphSeriesJson(self) -> str:
+        """JSON per-sensor value series (one list per sensor) for the Graph tab."""
+        _, series = all_sensor_series(list(self._player.frames))
+        return json.dumps(series)
+
+    @Property("QVariantList", notify=frameUpdated)  # type: ignore[arg-type]
     def overriddenSensors(self) -> list[int]:
         """Indices of sensors that currently have a replacement or offset."""
         return self._sensor_editor.active_indices()
@@ -202,7 +232,7 @@ class SessionController(QObject):
     def clusterAveragingEnabled(self) -> bool:
         return self._cluster_averaging_enabled
 
-    @clusterAveragingEnabled.setter
+    @clusterAveragingEnabled.setter  # type: ignore[no-redef]
     def clusterAveragingEnabled(self, value: bool) -> None:
         if self._cluster_averaging_enabled == value:
             return
@@ -210,13 +240,32 @@ class SessionController(QObject):
         self.clusterAveragingEnabledChanged.emit()
         self._reprocess_current()
 
+    @Property(int, notify=liveStatsChanged)
+    def receivedCount(self) -> int:
+        return self._received_count
+
+    @Property(int, notify=liveStatsChanged)
+    def errorCount(self) -> int:
+        return self._error_count
+
+    @Property(int, notify=liveStatsChanged)
+    def resyncCount(self) -> int:
+        return self._reader.resync_count if self._reader else 0
+
     # ---- mode + thresholds ----
     @Slot(str)
     @slot_error_boundary
     def setMode(self, mode: str) -> None:
         if mode == self._mode:
             return
+        if mode != "live":
             self.stopStream()
+            if self._mode == "live":
+                # Leaving a live session: blank the wafer map instead of
+                # freezing the last streamed frame on screen.
+                self._last = None
+                self._last_raw_frame = None
+                self.frameUpdated.emit()
         self._play_timer.stop()
         self._mode = mode
         self.modeChanged.emit()
@@ -243,24 +292,25 @@ class SessionController(QObject):
 
         frames = []
 
+        try:
             if is_official_csv(file_path):
                 sensors, records = read_official_csv(file_path)
                 frames = frames_from_wafer_data(None, records)
             else:
-            try:
                 data, _ = ZWaferParser().parse(file_path)
-            except (ValueError, KeyError) as exc:
-                log.warning("Could not parse %s: %s", file_path, exc)
-                return
                 if data is None or not data.sensors:
-                log.warning("Could not parse %s", file_path)
+                    self.loadFileError.emit("Invalid layout or missing sensors in custom CSV.")
                     return
                 records = read_data_records(file_path)
                 sensors = data.sensors
                 frames = frames_from_wafer_data(data, records)
 
             if not sensors or not frames:
-            log.warning("No sensors or data in %s", file_path)
+                self.loadFileError.emit("No sensors or frames found in data file.")
+                return
+        except Exception as exc:
+            log.warning("Could not parse file %s: %s", file_path, exc)
+            self.loadFileError.emit(f"Load error: {exc}")
             return
 
         wafer_id = ""
@@ -271,32 +321,282 @@ class SessionController(QObject):
             wafer_id = stem.split("-")[0] if "-" in stem else stem
 
         shape, size = resolve_shape_and_size(sensors, wafer_id)
+        self._ec_pairs = ec_pairs_for_wafer_id(wafer_id)
         self._sensors = WaferLayout(sensors, shape=shape, size=size)
         self._active_clusters = getattr(self._sensors, 'clusters', [])
         if not self._active_clusters:
             self._active_clusters = group_sensors_by_radius(self._sensors)
         self._player.load(frames)
         self._model.reset()
-        self._stats_tracker.reset()
         self._loaded_file = file_path
         self.loadedFileChanged.emit()
         self.sensorsChanged.emit()
         self._emit_current()
-        # Populate stats tracker from all loaded frames for trend chart (P3.1)
+
-        for frame in self._player._frames:
+    @Slot()
-            self._stats_tracker.track(frame.seq, frame.values)
+    @slot_error_boundary
-        self.trendData.emit(json.dumps(self._stats_tracker.get_trend()))
+    def unloadFile(self) -> None:
-        self.settingsChanged.emit()
+        """Clear the loaded file, resetting the player and frame states."""
+        self._player.load([])
+        self._model.reset()
+        self._ec_pairs = ()
+        self._loaded_file = ""
+        self.loadedFileChanged.emit()
+        self.sensorsChanged.emit()
+
+    # ---- comparison: DTW between two CSV files ----
+    @Slot(str, str)
+    @slot_error_boundary
+    def compareFiles(self, file_a: str, file_b: str) -> None:
+        """Run DTW comparison between two CSV files and emit result."""
+        from pathlib import Path
+
+        from pygui.backend.comparison import compare_runs
+        from pygui.backend.data.data_records import is_official_csv, read_data_records, read_official_csv
+
+        if Path(file_a).resolve() == Path(file_b).resolve():
+            self.comparisonResult.emit({
+                "success": False,
+                "error": "Cannot compare a file to itself. Choose two different runs."
+            })
+            return
+
+        try:
+            if is_official_csv(file_a):
+                _, recs_a = read_official_csv(file_a)
+            else:
+                recs_a = read_data_records(file_a)
+
+            if is_official_csv(file_b):
+                _, recs_b = read_official_csv(file_b)
+            else:
+                recs_b = read_data_records(file_b)
+            if not recs_a or not recs_b:
+                self.comparisonResult.emit({
+                    "success": False,
+                    "error": "No data in one or both files"
+                })
+                return
+
+            self._compare_recs_a = recs_a
+            self._compare_recs_b = recs_b
+
+            len_a, len_b = len(recs_a), len(recs_b)
+            # DTW can only align frames both runs actually have; the longer
+            # run's extra tail is still returned for display, just unaligned.
+            overlap_frames = min(len_a, len_b)
+            series_a = [recs_a[i].values[0] if recs_a[i].values else 0.0 for i in range(len_a)]
+            series_b = [recs_b[i].values[0] if recs_b[i].values else 0.0 for i in range(len_b)]
+            time_a = [round(recs_a[i].time, 3) for i in range(len_a)]
+            time_b = [round(recs_b[i].time, 3) for i in range(len_b)]
+
+            result = compare_runs(series_a[:overlap_frames], series_b[:overlap_frames])
+            self._compare_alignment_map = {i: j for i, j in result["warping_path"]}
+
+            # Mean temporal shift along the DTW path: positive means run B
+            # reaches the same profile features later than run A.
+            path = result["warping_path"]
+            frame_offset = round(sum(j - i for i, j in path) / len(path)) if path else 0
+            frame_offset_seconds = round(
+                sum(time_b[j] - time_a[i] for i, j in path) / len(path), 2
+            ) if path else 0.0
+
+            # Max sensor deviation: walk the DTW-aligned frame pairs (bounded to
+            # the overlap both runs share) and take the largest per-sensor abs
+            # difference across all sensors, not just the sensor[0] series used
+            # for alignment.
+            num_sensors = min(len(recs_a[0].values), len(recs_b[0].values)) if recs_a[0].values and recs_b[0].values else 0
+            max_sensor_deviation = 0.0
+            for i, j in zip(result["index_a"], result["index_b"]):
+                values_a = recs_a[i].values
+                values_b = recs_b[j].values
+                for s in range(min(num_sensors, len(values_a), len(values_b))):
+                    diff = abs(values_a[s] - values_b[s])
+                    if diff > max_sensor_deviation:
+                        max_sensor_deviation = diff
+
+            # Sensor layout + per-sensor diff for the wafer overlap view. Reuses the
+            # same sensor-parsing branch as loadFile() (file_a is assumed representative
+            # of both files' wafer type).
+            from pygui.backend.wafer.wafer_layouts import resolve_shape_and_size
+            from pygui.backend.wafer.zwafer_parser import ZWaferParser
+
+            sensor_layout: list[dict] = []
+            sensor_diff: list[float] = []
+            wafer_shape = "round"
+            wafer_size = 300.0
+            try:
+                if is_official_csv(file_a):
+                    sensors, _ = read_official_csv(file_a)
+                    stem = Path(file_a).stem
+                    wafer_id = stem.split("-")[0] if "-" in stem else stem
+                else:
+                    parsed, _ = ZWaferParser().parse(file_a)
+                    sensors = parsed.sensors if parsed else []
+                    wafer_id = parsed.serial if (parsed and parsed.serial) else ""
+
+                if sensors:
+                    wafer_shape, wafer_size = resolve_shape_and_size(sensors, wafer_id)
+                    last_a = recs_a[overlap_frames - 1].values
+                    last_b = recs_b[overlap_frames - 1].values
+                    n = min(len(sensors), len(last_a), len(last_b))
+                    sensor_layout = [
+                        {
+                            "label": s.label,
+                            "x": s.x,
+                            "y": s.y,
+                            "side": getattr(s, "side", "right"),
+                            "offset_x": getattr(s, "offset_x", 0.0),
+                            "offset_y": getattr(s, "offset_y", 0.0),
+                        }
+                        for s in sensors[:n]
+                    ]
+                    sensor_diff = [round(last_b[i] - last_a[i], 3) for i in range(n)]
+            except Exception as layout_exc:
+                log.warning("Could not resolve sensor layout for overlap view: %s", layout_exc)
+
+            self.comparisonResult.emit({
+                "success": True,
+                "distance": result["distance"],
+                # Lists, not tuples — tuples don't survive QVariant conversion
+                "warping_path": [list(p) for p in result["warping_path"][:50]],
+                "frame_offset": frame_offset,
+                "frame_offset_seconds": frame_offset_seconds,
+                "max_sensor_deviation": max_sensor_deviation,
+                "series_a": series_a,
+                "series_b": series_b,
+                "time_a": time_a,
+                "time_b": time_b,
+                "frame_count_a": len_a,
+                "frame_count_b": len_b,
+                "sensor_layout": sensor_layout,
+                "sensor_diff": sensor_diff,
+                "wafer_shape": wafer_shape,
+                "wafer_size": wafer_size,
+            })
+        except Exception as exc:
+            log.warning("Comparison failed: %s", exc)
+            self.comparisonResult.emit({
+                "success": False,
+                "error": str(exc)
+            })
+
+    @Slot(int, result="QVariantList")
+    def getSensorDiffAt(self, scrub_idx: int) -> list[float]:
+        """Return the per-sensor temp diff (Run B - Run A) at the given scrub frame index of Run A, using DTW alignment."""
+        if not self._compare_recs_a or not self._compare_recs_b:
+            return []
+
+        idx_a = min(max(0, scrub_idx), len(self._compare_recs_a) - 1)
+        if idx_a not in self._compare_alignment_map:
+            # DTW path only covers indices up to the shorter run's length —
+            # past that, Run B has no data at this frame, not a clampable one.
+            return []
+        idx_b = self._compare_alignment_map[idx_a]
+
+        values_a = self._compare_recs_a[idx_a].values
+        values_b = self._compare_recs_b[idx_b].values
+
+        n = min(len(values_a), len(values_b))
+        return [round(values_b[i] - values_a[i], 3) for i in range(n)]
+
+    # ---- splitting: threshold-based segmentation ----
+    @Slot(str, float)
+    @slot_error_boundary
+    def splitData(self, file_path: str, threshold: float) -> None:
+        """Segment temperature profile into Ramp/Soak/Cool phases."""
+        from pygui.backend.data.data_records import is_official_csv, read_data_records, read_official_csv
+        from pygui.backend.splitter import segment_profile
+
+        try:
+            if is_official_csv(file_path):
+                _, records = read_official_csv(file_path)
+            else:
+                records = read_data_records(file_path)
+            if not records:
+                self.splitResult.emit({
+                    "success": False,
+                    "error": "No data in file"
+                })
+                return
+
+            # Extract average temperatures (use first sensor as proxy)
+            avg_temps = [rec.values[0] if rec.values else 0.0 for rec in records]
+            segments = segment_profile(avg_temps, threshold)
+
+            # cache for exportSegment (per-segment Export in SplitDialog)
+            self._last_split_file = file_path
+            self._last_split_segments = segments
+
+            self.splitResult.emit({
+                "success": True,
+                "segments": [{
+                    "label": seg.label,
+                    "start_frame": seg.start_frame,
+                    "end_frame": seg.end_frame,
+                    "avg_temp": seg.avg_temp
+                } for seg in segments]
+            })
+        except Exception as exc:
+            log.warning("Split failed: %s", exc)
+            self.splitResult.emit({
+                "success": False,
+                "error": str(exc)
+            })
+
+    @Slot(int)
+    @slot_error_boundary
+    def exportSegment(self, index: int) -> None:
+        """Write one segment from the last split as a standalone CSV.
+
+        Output lands next to the source file as
+        ``<stem>_<label><index>.csv`` — the stem keeps its wafer-id prefix
+        so read_official_csv still resolves the layout on re-import.
+        Emits segmentExported with success + path (or error).
+        """
+        from pathlib import Path
+
+        from pygui.backend.data.csv_recorder import CsvRecorder
+
+        source = getattr(self, "_last_split_file", "")
+        segments = getattr(self, "_last_split_segments", [])
+        if not source or not (0 <= index < len(segments)):
+            self.segmentExported.emit({
+                "success": False,
+                "error": "No split result to export"
+            })
+            return
+
+        seg = segments[index]
+        src = Path(source)
+        dest = src.with_name(f"{src.stem}_{seg.label.lower()}{index + 1}.csv")
+        try:
+            ok = CsvRecorder.write_segment(
+                str(dest), str(src), seg.start_frame, seg.end_frame)
+        except Exception as exc:
+            log.warning("Segment export failed: %s", exc)
+            self.segmentExported.emit({"success": False, "error": str(exc)})
+            return
+
+        if ok:
+            self.segmentExported.emit({"success": True, "path": str(dest)})
+        else:
+            self.segmentExported.emit({
+                "success": False,
+                "error": "No frames in range"
+            })
 
     @Slot()
     @slot_error_boundary
     def play(self) -> None:
         self._play_timer.start(self._next_interval_ms())
+        self.stateChanged.emit()
 
     @Slot()
     @slot_error_boundary
     def pause(self) -> None:
         self._play_timer.stop()
+        self.stateChanged.emit()
 
     @Slot()
     @slot_error_boundary
@@ -304,6 +604,7 @@ class SessionController(QObject):
         self._play_timer.stop()
         self._player.seek(0)
         self._emit_current()
+        self.stateChanged.emit()
 
     @Slot(int)
     @slot_error_boundary
@@ -311,6 +612,7 @@ class SessionController(QObject):
         self._play_timer.stop()
         self._player.step(delta)
         self._emit_current()
+        self.stateChanged.emit()
 
     @Slot(int)
     @slot_error_boundary
@@ -335,6 +637,7 @@ class SessionController(QObject):
     def _advance(self) -> None:
         if self._player.at_end:
             self._play_timer.stop()
+            self.stateChanged.emit()
             return
         self._player.step(1)
         self._emit_current()
@@ -373,6 +676,9 @@ class SessionController(QObject):
     @Slot(str, str)
     @slot_error_boundary
     def startStream(self, port: str, family_code: str = "") -> None:
+        if self._reader is not None:
+            log.warning("startStream: StreamReader is already running.")
+            return
 
         from pygui.backend.wafer.wafer_layouts import load_layout_for_wafer_id
         from pygui.serialcomm.serial_port import SerialPort  # transport open
@@ -383,6 +689,7 @@ class SessionController(QObject):
                 self.sensorsChanged.emit()
             except Exception as e:
                 log.warning("Could not load layout for %s: %s", family_code, e)
+        self._ec_pairs = ec_pairs_for_wafer_id(family_code)
 
         self._active_clusters = getattr(self._sensors, 'clusters', [])
         if not self._active_clusters:
@@ -413,24 +720,36 @@ class SessionController(QObject):
 
         # Clear out any old data from the prev sessions
         self._model.reset()
-        self._trend_buffer.clear()
+        self._reset_live_trend()
-        self._trend_timestamps.clear()
-        self._trend_timer.start()
-        self._stats_tracker.reset()
         self._last = None
         self._last_raw_frame = None
+        self._received_count = 0
+        self._error_count = 0
+        self.liveStatsChanged.emit()
 
         transport = SerialPort.open_port(port, timeout=1)
         # Send 'D2' command padded to 512 bytes to start the stream
         cmd = b"D2" + SerialPort.COMMAND_PAD.encode()
         transport.write(cmd)
 
+        import weakref
+        weak_self = weakref.ref(self)
+
         def on_error(exc: Exception):
             log.error("Live stream error: %s", exc)
+            ref = weak_self()
+            if ref is not None:
+                ref._liveError.emit()
+                ref.stopStream()
+
+        def on_frame(frame: Frame):
+            ref = weak_self()
+            if ref is not None:
+                ref._liveFrame.emit(frame)
 
         self._reader = StreamReader(
             transport, parse_binary_frame,
-            on_frame=lambda f: self._liveFrame.emit(f),
+            on_frame=on_frame,
             on_error=on_error,
             family_code=family_code or "A")
         self._reader.start()
@@ -443,13 +762,14 @@ class SessionController(QObject):
     @slot_error_boundary
     def stopStream(self) -> None:
         self._repaint_timer.stop()
-        self._trend_timer.stop()
+        self._received_count = 0
+        self._error_count = 0
+        self.liveStatsChanged.emit()
         if self._reader:
             transport = self._reader._transport
-            self._reader.stop()
-            self._reader = None
 
             # Send 'D2S' command padded to 512 bytes to stop the stream
+            # Send BEFORE stopping the reader which will close the port on thread exit
             if transport and transport.is_open:
                 try:
                     cmd = b"D2S" + (b"F" * 509)
@@ -458,14 +778,17 @@ class SessionController(QObject):
                 except Exception as exc:
                     log.error("Error sending stop command: %s", exc)
 
+            self._reader.stop()
+            self._reader = None
+
         self.stateChanged.emit()
         self.stopRecording()
 
     @Slot(object)
     @slot_error_boundary
     def _on_live_frame(self, frame: Frame) -> None:
-        import json
+        self._received_count += 1
-        self._stats_tracker.track(frame.seq, frame.values)
+        self.liveStatsChanged.emit()
         # Main thread (queued). Record raw, process edited; mark dirty for repaint.
         self._last_raw_frame = frame
         edited = Frame(seq=frame.seq, time=frame.time,
@@ -474,22 +797,11 @@ class SessionController(QObject):
         if self._recorder.is_recording:
             self._recorder.write(frame)   # always record raw values, never edited
         self._dirty = True
-        self.trendData.emit(json.dumps(self._stats_tracker.get_trend()))
 
         if self._last and self._last.stats:
             avg = self._last.stats.avg
-            now = time.monotonic()
+            elapsed = time.monotonic() - self._stream_start_time
-            self._trend_buffer.append(avg)
+            self.trendDelta.emit(json.dumps([[elapsed, avg]]))
-            self._trend_timestamps.append(now)
-
-            # drop entries older than 60 secs
-            cutoff = now -60
-            while self._trend_timestamps and self._trend_timestamps[0] < cutoff:
-                self._trend_timestamps.pop(0)
-                self._trend_buffer.pop(0)
-
-
-
 
     def _flush_repaint(self) -> None:
         if not self._dirty:
@@ -498,6 +810,11 @@ class SessionController(QObject):
         self.frameUpdated.emit()
         self.stateChanged.emit()
 
+    def _on_live_error(self) -> None:
+        """Main-thread callback for worker-thread stream errors."""
+        self._error_count += 1
+        self.liveStatsChanged.emit()
+
     # ---- recording ----
     @Slot(str, str)
     @slot_error_boundary
@@ -540,8 +857,8 @@ class SessionController(QObject):
         self._sensor_editor.clear()
         self._reprocess_current()
 
-    def _flush_trend(self) -> None:
+    def _reset_live_trend(self) -> None:
-        import json
+        """Mark a fresh stream start for elapsed-time trend deltas."""
-        self.trendData.emit(json.dumps(self._trend_buffer))
+        self._stream_start_time = time.monotonic()
-
+        self.trendReset.emit()
 

src/pygui/backend/crypto/__init__.py

@@ -1,2 +0,0 @@
-# ===== Crypto Sub-package =====
-from pygui.backend.crypto.crypto_helper import *  # noqa: F403

src/pygui/backend/data/__init__.py

@@ -1,14 +0,0 @@
-# ===== Data Sub-package =====
-from pygui.backend.data.csv_file_metadata import CSVFileMetadata
-from pygui.backend.data.csv_recorder import CsvRecorder
-from pygui.backend.data.data_records import is_official_csv, read_data_records, read_official_csv
-from pygui.backend.data.file_browser import FileBrowser
-from pygui.backend.data.local_settings import LocalSettings
-from pygui.backend.data.local_settings_model import LocalSettingsModel
-
-__all__ = [
-    "CsvRecorder", "CSVFileMetadata",
-    "read_data_records", "is_official_csv", "read_official_csv",
-    "FileBrowser",
-    "LocalSettings", "LocalSettingsModel",
-]

src/pygui/backend/data/constants.py

@@ -1,3 +1,14 @@
 # ===== Backend Data Constants =====
 
+from pathlib import Path
+
+from PySide6.QtCore import QStandardPaths
+
 DEFAULT_DATA_DIR_NAME = "isc_data"
+
+
+def default_data_dir() -> Path:
+    """Documents-folder isc_data directory used as the default app data location."""
+    documents_dir = QStandardPaths.writableLocation(QStandardPaths.StandardLocation.DocumentsLocation)
+    base_dir = Path(documents_dir) if documents_dir else (Path.home() / "Documents")
+    return base_dir / DEFAULT_DATA_DIR_NAME

src/pygui/backend/data/csv_file_metadata.py

@@ -19,8 +19,8 @@ class CSVFileMetadata:
         """Return the first character of the wafer string, or empty if none"""
         return self.wafer[0] if self.wafer else ""
 
-    def get_date(self) -> datetime:
+    def get_date(self) -> datetime | None:
-        """Parsifes the date string. Returns current time if parsing fails"""
+        """Parsifes the date string. Returns None if parsing fails"""
         date_format = "%Y-%m-%d %H:%M:%S"
         try:
             return datetime.strptime(self.date, date_format)

src/pygui/backend/data/csv_recorder.py

@@ -1,4 +1,5 @@
 """Append live frames"""
+
 from __future__ import annotations
 
 from datetime import datetime
@@ -12,14 +13,12 @@ from pygui.backend.wafer.zwafer_models import Sensor
 class CsvRecorder:
     def __init__(self) -> None:
         self._file_handle: Optional[TextIO] = None
-        self._oath: Optional[str] = None
+        self._path: Optional[str] = None
-
 
     @property
     def is_recording(self) -> bool:
         return self._file_handle is not None
 
-
     def start(self, path: str, sensors: list[Sensor], serial: str = "") -> None:
         Path(path).parent.mkdir(parents=True, exist_ok=True)
         file_handle = open(path, "w", encoding="utf-8", newline="")
@@ -50,6 +49,12 @@ class CsvRecorder:
     def write_segment(file_path: str, source_path: str, start_frame: int, end_frame: int) -> bool:
         """Copy a range of frames from source CSV into a new file.
 
+        Preserves the source's header structure so the segment re-imports
+        through FileBrowser unchanged: official CSVs keep their sensor-name
+        row, Z-wafer CSVs keep every metadata line through the "data"
+        sentinel. Frame indices count only valid data rows, matching how
+        the readers in data_records.py number frames.
+
         Args:
             file_path: Output CSV path.
             source_path: Source CSV path with full wafer data
@@ -57,11 +62,42 @@ class CsvRecorder:
             end_frame: Last frame index (inclusive)
 
         Returns:
-            True on success.
+            True on success (at least one frame written).
         """
-        import pandas as pd
+        from pygui.backend.data.data_records import is_data_row, is_official_csv
-        df = pd.read_csv(source_path)
-        segment = df.iloc[start_frame:end_frame + 1]
-        segment.to_csv(file_path, index=False)
-        return True
 
+        if start_frame < 0 or end_frame < start_frame:
+            return False
+
+        with open(source_path, "r", encoding="utf-8") as f:
+            lines = f.readlines()
+
+        out: list[str] = []
+        written = 0
+        frame_idx = -1
+        in_data = is_official_csv(source_path)
+
+        for i, line in enumerate(lines):
+            stripped = line.rstrip().rstrip(",").strip()
+            if not in_data:
+                out.append(line)
+                if stripped and stripped.split(",")[0].lower() == "data":
+                    in_data = True
+                continue
+            if i == 0:
+                # official format: row 0 is the sensor-name header
+                out.append(line)
+                continue
+            if not stripped or not is_data_row(stripped):
+                continue
+            frame_idx += 1
+            if start_frame <= frame_idx <= end_frame:
+                out.append(line if line.endswith("\n") else line + "\n")
+                written += 1
+
+        if written == 0:
+            return False
+        Path(file_path).parent.mkdir(parents=True, exist_ok=True)
+        with open(file_path, "w", encoding="utf-8", newline="") as f:
+            f.writelines(out)
+        return True

src/pygui/backend/data/data_records.py

@@ -1,4 +1,5 @@
 """Read the data section of a Z-wafer CSV into DataRecords, or the official headerless CSV."""
+
 from __future__ import annotations
 
 from pathlib import Path
@@ -6,6 +7,20 @@ from pathlib import Path
 from pygui.backend.wafer.zwafer_models import DataRecord, Sensor
 
 
+def is_data_row(line: str) -> bool:
+    """True if *line* is a single CSV row of numeric values (no headers/metadata)."""
+    cols = [c.strip() for c in line.split(",") if c.strip() != ""]
+    return bool(cols) and all(_is_float(c) for c in cols)
+
+
+def _is_float(s: str) -> bool:
+    try:
+        float(s)
+    except ValueError:
+        return False
+    return True
+
+
 def read_data_records(file_path: str) -> list[DataRecord]:
     records: list[DataRecord] = []
     in_data = False
@@ -18,13 +33,10 @@ def read_data_records(file_path: str) -> list[DataRecord]:
                 if line.split(",")[0].lower() == "data":
                     in_data = True
                 continue
+            if not is_data_row(line):
+                continue
             cols = [c.strip() for c in line.split(",") if c.strip() != ""]
-            try:
             nums = [float(c) for c in cols]
-            except ValueError:
-                continue
-            if not nums:
-                continue
             records.append(DataRecord(time=nums[0], values=nums[1:]))
         return records
 

src/pygui/backend/data/file_browser.py

@@ -5,10 +5,10 @@ import re
 from datetime import datetime
 from pathlib import Path
 
-from PySide6.QtCore import Property, QObject, QStandardPaths, Signal, Slot
+from PySide6.QtCore import Property, QObject, Signal, Slot
 from PySide6.QtWidgets import QFileDialog, QMessageBox
 
-from pygui.backend.data.constants import DEFAULT_DATA_DIR_NAME
+from pygui.backend.data.constants import default_data_dir
 from pygui.backend.data.csv_file_metadata import CSVFileMetadata
 from pygui.backend.wafer.zwafer_parser import ZWaferParser
 
@@ -28,7 +28,7 @@ class FileBrowser(QObject):
         self._refresh_files(show_empty_message=False)
 
     # ===== Exposed Properties =====
-    @Property("QVariantList", notify=filesChanged)
+    @Property("QVariantList", notify=filesChanged)  # type: ignore[arg-type]
     def files(self) -> list[dict[str, object]]:
         return [dict(row) for row in self._files]
 
@@ -37,12 +37,22 @@ class FileBrowser(QObject):
         return str(self._current_directory)
 
     # ===== Directory Selection =====
+    @Slot(str)
+    def setCurrentDirectory(self, path: str) -> None:
+        """Point the browser at `path` without opening a native dialog.
+
+        Used to keep this directory in sync with DeviceController.saveDataDir
+        when the user picks a save folder elsewhere in the app.
+        """
+        self._set_current_directory(Path(path))
+        self._refresh_files(show_empty_message=False)
+
     @Slot()
     def chooseDirectory(self) -> None:
         selected_dir = QFileDialog.getExistingDirectory(
             None,
             "Select CSV Folder",
-            self.currentDirectory,
+            str(self._current_directory),
         )
         if not selected_dir:
             return
@@ -71,11 +81,10 @@ class FileBrowser(QObject):
             self._show_error(f"CSV file was not found:\n{file_path}")
             return
 
+        # ponytail: row is absent when saving metadata for a CSV just read from
+        # the wafer (not in the browser listing) — still write the sidecar.
         row = self._find_row(file_path)
-        if row is None:
+        if row is not None:
-            self._show_error("The selected CSV row is no longer available.")
-            return
-
             row["wafer"] = wafer
             row["date"] = date
             row["chamber"] = chamber
@@ -119,6 +128,11 @@ class FileBrowser(QObject):
             return
 
         for csv_path in sorted(self._current_directory.glob("*.csv")):
+            # Recorded-live CSVs are named "live_<serial>_<timestamp>.csv" by
+            # SessionController.startRecording (see WaferMapTab's Record button),
+            # distinct from the "<serial>-<timestamp>.csv" convention used by
+            # DeviceController.parseAndSaveData for read-memory dumps.
+            is_recording = csv_path.stem.lower().startswith("live_")
             try:
                 metadata = self._load_metadata(csv_path)
                 wafer_type = metadata.get_wafer_type().upper() or (csv_path.stem[0].upper() if csv_path.stem else "")
@@ -146,6 +160,7 @@ class FileBrowser(QObject):
                         "masterType": master_state.get(str(csv_path), "") or metadata.master_type,
                         "fileName": str(csv_path),
                         "highlight": wafer_type in {"A", "B", "C"},
+                        "isRecording": is_recording,
                     }
                 )
             except Exception:
@@ -169,6 +184,7 @@ class FileBrowser(QObject):
                         "masterType": master_state.get(str(csv_path), ""),
                         "fileName": str(csv_path),
                         "highlight": False,
+                        "isRecording": is_recording,
                     }
                 )
 
@@ -229,11 +245,7 @@ class FileBrowser(QObject):
 
     # ===== Internal Helpers =====
     def _resolve_default_directory(self) -> Path:
-        documents_dir = QStandardPaths.writableLocation(
+        return default_data_dir()
-            QStandardPaths.DocumentsLocation
-        )
-        base_dir = Path(documents_dir) if documents_dir else (Path.home() / "Documents")
-        return base_dir / DEFAULT_DATA_DIR_NAME
 
     def _set_current_directory(self, directory: Path) -> None:
         normalized = Path(directory)

src/pygui/backend/data/local_settings.py

@@ -13,8 +13,8 @@ class LocalSettings:
         # Configuration settings
         self.chamber_id = ""
         self.reverse_z_wafer = False
-        self.master = {}  # Dict[str, str]
+        self.master: dict[str, str] = {}
-        self.wafer_data_size = {}  # Dict[str, int]
+        self.wafer_data_size: dict[str, int] = {}
         self.debug = False
         self.wafer_read_retries = 8
         # Timeout in msec for reading from the wafer (default 2 min)
@@ -32,9 +32,6 @@ class LocalSettings:
         self.data_col_count = 0
         self.last_csv_path = ""
 
-        # Session persistence
-        self.session_last_file = ""
-
     # ===== File Path Helpers =====
     @classmethod
     def _settings_path(cls, directory: str) -> Path:

src/pygui/backend/data/local_settings_model.py

@@ -2,17 +2,26 @@ from __future__ import annotations
 
 from copy import deepcopy
 from pathlib import Path
-from typing import Any
+from typing import Any, Callable
 
-from PySide6.QtCore import Property, QDateTime, QObject, QStandardPaths, Signal, Slot
+from PySide6.QtCore import Property, QDateTime, QObject, Signal, Slot
 
-from pygui.backend.data.constants import DEFAULT_DATA_DIR_NAME
 from pygui.backend.data.local_settings import LocalSettings
 
 MASTER_FAMILIES = ("A", "B", "C", "D", "E", "F", "P", "X", "Z")
 
 
 class LocalSettingsModel(QObject):
+    # Draft attrs are seeded via setattr() in __init__ from _new_defaults();
+    # declared here so mypy knows their types.
+    _chamber_id: str
+    _reverse_z_wafer: bool
+    _debug_mode: bool
+    _wafer_read_timeout: int
+    _wafer_detect_timeout: int
+    _wafer_retries: int
+    _masters: dict[str, str]
+
     chamberIdChanged = Signal()
     reverseZWaferChanged = Signal()
     debugModeChanged = Signal()
@@ -26,18 +35,35 @@ class LocalSettingsModel(QObject):
     saveStatusChanged = Signal()
     lastSavedAtChanged = Signal()
 
-    def __init__(self, parent: QObject | None = None) -> None:
+    # Draft attr (this class) <-> LocalSettings attr (the shared, persisted
+    # instance also held by DeviceController) <-> coercer applied on both
+    # load and revert/reset. One table drives load/save/revert/reset instead
+    # of four hand-written field-by-field copies.
+    _FIELD_MAP: tuple[tuple[str, str, Callable[[Any], Any]], ...] = (
+        ("_chamber_id", "chamber_id", str),
+        ("_reverse_z_wafer", "reverse_z_wafer", bool),
+        ("_debug_mode", "debug", bool),
+        ("_wafer_read_timeout", "wafer_read_timeout", int),
+        ("_wafer_detect_timeout", "wafer_detect_timeout", int),
+        ("_wafer_retries", "wafer_read_retries", int),
+    )
+
+    def __init__(
+        self,
+        settings: LocalSettings,
+        data_dir: Path | str,
+        parent: QObject | None = None,
+    ) -> None:
         super().__init__(parent)
-        self._data_dir = self._resolve_data_dir()
+        # Shared with DeviceController — saving here must mutate this same
+        # instance, not a throwaway copy, or the device layer keeps using
+        # stale config until restart.
+        self._settings = settings
+        self._data_dir = Path(data_dir)
         self._defaults = self._new_defaults()
 
-        self._chamber_id = self._defaults["chamberId"]
+        for draft_attr, default_value in self._defaults.items():
-        self._reverse_z_wafer = self._defaults["reverseZWafer"]
+            setattr(self, draft_attr, deepcopy(default_value))
-        self._debug_mode = self._defaults["debugMode"]
-        self._wafer_read_timeout = self._defaults["waferReadTimeout"]
-        self._wafer_detect_timeout = self._defaults["waferDetectTimeout"]
-        self._wafer_retries = self._defaults["waferRetries"]
-        self._masters = deepcopy(self._defaults["masters"])
 
         self._is_dirty = False
         self._is_valid = True
@@ -47,34 +73,21 @@ class LocalSettingsModel(QObject):
         self._saved_snapshot = self._snapshot()
         self._recompute_derived()
 
-    def _resolve_data_dir(self) -> Path:
-        documents_dir = QStandardPaths.writableLocation(
-            QStandardPaths.DocumentsLocation
-        )
-        base_dir = Path(documents_dir) if documents_dir else (Path.home() / "Documents")
-        return base_dir / DEFAULT_DATA_DIR_NAME
-
     def _new_defaults(self) -> dict[str, Any]:
         return {
-            "chamberId": "2",
+            "_chamber_id": "2",
-            "reverseZWafer": False,
+            "_reverse_z_wafer": False,
-            "debugMode": False,
+            "_debug_mode": False,
-            "waferReadTimeout": 120000,
+            "_wafer_read_timeout": 120000,
-            "waferDetectTimeout": 5000,
+            "_wafer_detect_timeout": 5000,
-            "waferRetries": 8,
+            "_wafer_retries": 8,
-            "masters": {family: "" for family in MASTER_FAMILIES},
+            "_masters": {family: "" for family in MASTER_FAMILIES},
         }
 
     def _snapshot(self) -> dict[str, Any]:
-        return {
+        snap = {attr: getattr(self, attr) for attr, _, _ in self._FIELD_MAP}
-            "chamberId": self._chamber_id,
+        snap["_masters"] = deepcopy(self._masters)
-            "reverseZWafer": self._reverse_z_wafer,
+        return snap
-            "debugMode": self._debug_mode,
-            "waferReadTimeout": self._wafer_read_timeout,
-            "waferDetectTimeout": self._wafer_detect_timeout,
-            "waferRetries": self._wafer_retries,
-            "masters": deepcopy(self._masters),
-        }
 
     def _set_is_dirty(self, value: bool) -> None:
         if self._is_dirty != value:
@@ -137,22 +150,19 @@ class LocalSettingsModel(QObject):
         self.waferRetriesChanged.emit()
         self.mastersChanged.emit()
 
-    def _to_local_settings(self) -> LocalSettings:
+    def _normalized_masters(self, source: dict[str, str]) -> dict[str, str]:
-        settings = LocalSettings()
+        masters = {family: "" for family in MASTER_FAMILIES}
-        settings.chamber_id = self._chamber_id
+        for family, value in source.items():
-        settings.reverse_z_wafer = self._reverse_z_wafer
+            normalized = str(family).strip().upper()
-        settings.debug = self._debug_mode
+            if normalized in masters:
-        settings.wafer_read_timeout = self._wafer_read_timeout
+                masters[normalized] = str(value).strip()
-        settings.wafer_detect_timeout = self._wafer_detect_timeout
+        return masters
-        settings.wafer_read_retries = self._wafer_retries
-        settings.master = deepcopy(self._masters)
-        return settings
 
     @Property(str, notify=chamberIdChanged)
     def chamberId(self) -> str:
         return self._chamber_id
 
-    @chamberId.setter
+    @chamberId.setter  # type: ignore[no-redef]
     def chamberId(self, value: str) -> None:
         next_value = str(value).strip()
         if self._chamber_id == next_value:
@@ -165,7 +175,7 @@ class LocalSettingsModel(QObject):
     def reverseZWafer(self) -> bool:
         return self._reverse_z_wafer
 
-    @reverseZWafer.setter
+    @reverseZWafer.setter  # type: ignore[no-redef]
     def reverseZWafer(self, value: bool) -> None:
         if self._reverse_z_wafer == value:
             return
@@ -177,7 +187,7 @@ class LocalSettingsModel(QObject):
     def debugMode(self) -> bool:
         return self._debug_mode
 
-    @debugMode.setter
+    @debugMode.setter  # type: ignore[no-redef]
     def debugMode(self, value: bool) -> None:
         if self._debug_mode == value:
             return
@@ -189,7 +199,7 @@ class LocalSettingsModel(QObject):
     def waferReadTimeout(self) -> int:
         return self._wafer_read_timeout
 
-    @waferReadTimeout.setter
+    @waferReadTimeout.setter  # type: ignore[no-redef]
     def waferReadTimeout(self, value: int) -> None:
         if self._wafer_read_timeout == value:
             return
@@ -201,7 +211,7 @@ class LocalSettingsModel(QObject):
     def waferDetectTimeout(self) -> int:
         return self._wafer_detect_timeout
 
-    @waferDetectTimeout.setter
+    @waferDetectTimeout.setter  # type: ignore[no-redef]
     def waferDetectTimeout(self, value: int) -> None:
         if self._wafer_detect_timeout == value:
             return
@@ -213,7 +223,7 @@ class LocalSettingsModel(QObject):
     def waferRetries(self) -> int:
         return self._wafer_retries
 
-    @waferRetries.setter
+    @waferRetries.setter  # type: ignore[no-redef]
     def waferRetries(self, value: int) -> None:
         if self._wafer_retries == value:
             return
@@ -251,22 +261,11 @@ class LocalSettingsModel(QObject):
 
     @Slot()
     def loadSettings(self) -> None:
-        loaded = LocalSettings.read_settings(str(self._data_dir))
+        """Seed draft fields from the shared LocalSettings instance."""
-        self._chamber_id = str(loaded.chamber_id).strip() or str(
+        for draft_attr, settings_attr, coerce in self._FIELD_MAP:
-            self._defaults["chamberId"]
+            setattr(self, draft_attr, coerce(getattr(self._settings, settings_attr)))
-        )
+        self._chamber_id = self._chamber_id.strip() or str(self._defaults["_chamber_id"])
-        self._reverse_z_wafer = bool(loaded.reverse_z_wafer)
+        self._masters = self._normalized_masters(self._settings.master)
-        self._debug_mode = bool(loaded.debug)
-        self._wafer_read_timeout = int(loaded.wafer_read_timeout)
-        self._wafer_detect_timeout = int(loaded.wafer_detect_timeout)
-        self._wafer_retries = int(loaded.wafer_read_retries)
-
-        masters = {family: "" for family in MASTER_FAMILIES}
-        for family, value in loaded.master.items():
-            normalized = str(family).strip().upper()
-            if normalized in masters:
-                masters[normalized] = str(value).strip()
-        self._masters = masters
 
         self._saved_snapshot = self._snapshot()
         self._emit_all_changed()
@@ -275,13 +274,18 @@ class LocalSettingsModel(QObject):
 
     @Slot()
     def saveSettings(self) -> None:
+        """Write draft fields onto the shared LocalSettings instance and persist it."""
         self._recompute_derived()
         if not self._is_valid:
             self._set_save_status("error: invalid settings")
             return
 
         try:
-            LocalSettings.save_settings(str(self._data_dir), self._to_local_settings())
+            for draft_attr, settings_attr, _coerce in self._FIELD_MAP:
+                setattr(self._settings, settings_attr, getattr(self, draft_attr))
+            self._settings.master = deepcopy(self._masters)
+            LocalSettings.save_settings(str(self._data_dir), self._settings)
+
             self._saved_snapshot = self._snapshot()
             self._recompute_derived()
             self._set_save_status("Saved")
@@ -293,13 +297,9 @@ class LocalSettingsModel(QObject):
     @Slot()
     def revertChanges(self) -> None:
         snap = self._saved_snapshot
-        self._chamber_id = str(snap["chamberId"])
+        for draft_attr, _settings_attr, coerce in self._FIELD_MAP:
-        self._reverse_z_wafer = bool(snap["reverseZWafer"])
+            setattr(self, draft_attr, coerce(snap[draft_attr]))
-        self._debug_mode = bool(snap["debugMode"])
+        self._masters = deepcopy(snap["_masters"])
-        self._wafer_read_timeout = int(snap["waferReadTimeout"])
-        self._wafer_detect_timeout = int(snap["waferDetectTimeout"])
-        self._wafer_retries = int(snap["waferRetries"])
-        self._masters = deepcopy(snap["masters"])
 
         self._emit_all_changed()
         self._recompute_derived()
@@ -307,13 +307,9 @@ class LocalSettingsModel(QObject):
 
     @Slot()
     def resetDefaults(self) -> None:
-        self._chamber_id = str(self._defaults["chamberId"])
+        for draft_attr, _settings_attr, coerce in self._FIELD_MAP:
-        self._reverse_z_wafer = bool(self._defaults["reverseZWafer"])
+            setattr(self, draft_attr, coerce(self._defaults[draft_attr]))
-        self._debug_mode = bool(self._defaults["debugMode"])
+        self._masters = deepcopy(self._defaults["_masters"])
-        self._wafer_read_timeout = int(self._defaults["waferReadTimeout"])
-        self._wafer_detect_timeout = int(self._defaults["waferDetectTimeout"])
-        self._wafer_retries = int(self._defaults["waferRetries"])
-        self._masters = deepcopy(self._defaults["masters"])
 
         self._emit_all_changed()
         self._recompute_derived()

src/pygui/backend/license/license_manager.py

@@ -0,0 +1,126 @@
+"""C#-compatible wafer license file parsing.
+
+License files are AES-128-CBC encrypted `.bin` blobs named
+``X00000-00.bin`` where ``X`` is the wafer family code, ``00000`` the
+5-digit serial number, and ``00`` the 2-digit license level. The blob is
+``ciphertext || iv`` (IV is the trailing 16 bytes). The decrypted text is
+a fixed-offset record::
+
+    [0:6]   serial       e.g. "A00001"
+    [7:15]  mfg date     8 hex chars
+    [16:18] level        2 decimal digits ("00" basic, "01"+ adds replay)
+    [19:27] license date 8 hex chars
+
+The key is hardcoded to match the C# application exactly
+"""
+
+import logging
+import re
+from dataclasses import dataclass
+from pathlib import Path
+
+from pygui.backend.crypto.crypto_helper import CryptoHelper
+
+log = logging.getLogger(__name__)
+
+LICENSE_KEY = b"ThisIsA16ByteKey"
+LICENSE_FILENAME_RE = re.compile(r"^[A-Z]\d{5}-\d{2}\.bin$")
+
+_MIN_TEXT_LEN = 27
+
+
+# ===== License Record =====
+@dataclass(frozen=True)
+class License:
+    """One parsed license file (all fields as stored in the file)."""
+
+    serial: str        # "A00001"
+    level: str         # "00".."03"
+    mfg_date_hex: str  # 8 hex chars
+    lic_date_hex: str  # 8 hex chars
+
+    @property
+    def level_int(self) -> int:
+        """Level as int; -1 if unparseable."""
+        try:
+            return int(self.level, 10)
+        except ValueError:
+            return -1
+
+    @property
+    def mfg_date_decimal(self) -> str:
+        """Mfg date shown as decimal (C# grid does Convert.ToInt64(hex, 16))."""
+        return _hex_to_decimal(self.mfg_date_hex)
+
+    @property
+    def lic_date_decimal(self) -> str:
+        """License date shown as decimal, same conversion as the C# grid."""
+        return _hex_to_decimal(self.lic_date_hex)
+
+
+def _hex_to_decimal(hex_str: str) -> str:
+    try:
+        return str(int(hex_str, 16))
+    except ValueError:
+        return ""
+
+
+# ===== Blob Parsing =====
+def split_data_iv(blob: bytes) -> tuple[bytes, bytes]:
+    """Split a license blob into (ciphertext, iv) — IV is the last 16 bytes."""
+    if len(blob) < 32:
+        raise ValueError("License blob too short")
+    return blob[:-16], blob[-16:]
+
+
+def parse_license_blob(blob: bytes) -> License | None:
+    """Decrypt and parse one license blob. None if malformed."""
+    try:
+        data, iv = split_data_iv(blob)
+        message = CryptoHelper.decrypt_aes(data, LICENSE_KEY, iv)
+        text = message.decode("utf-8")
+    except (ValueError, UnicodeDecodeError) as exc:
+        log.warning("Undecryptable license blob: %s", exc)
+        return None
+
+    if len(text) < _MIN_TEXT_LEN:
+        log.warning("License text too short (%d chars)", len(text))
+        return None
+
+    return License(
+        serial=text[0:6],
+        mfg_date_hex=text[7:15],
+        level=text[16:18],
+        lic_date_hex=text[19:27],
+    )
+
+
+# ===== Directory Scan =====
+def read_license_files(licenses_dir: str | Path) -> list[License]:
+    """Parse every valid license .bin in the directory.
+
+    A file counts only if its name matches ``X00000-00.bin`` AND equals
+    ``{serial}-{level}.bin`` from its own decrypted payload — same
+    tamper check as the C# app.
+    """
+    directory = Path(licenses_dir)
+    if not directory.is_dir():
+        return []
+
+    licenses: list[License] = []
+    for path in sorted(directory.glob("*.bin")):
+        if not LICENSE_FILENAME_RE.match(path.name):
+            continue
+        try:
+            blob = path.read_bytes()
+        except OSError as exc:
+            log.warning("Cannot read license file %s: %s", path, exc)
+            continue
+        lic = parse_license_blob(blob)
+        if lic is None:
+            continue
+        if path.name != f"{lic.serial}-{lic.level}.bin":
+            log.warning("License filename mismatch: %s", path.name)
+            continue
+        licenses.append(lic)
+    return licenses

src/pygui/backend/license/license_model.py

@@ -0,0 +1,146 @@
+"""QML-facing license model: grid rows, Load License, replay trial marker."""
+
+import logging
+import shutil
+import time
+from pathlib import Path
+from urllib.parse import unquote, urlparse
+
+from PySide6.QtCore import Property, QObject, Signal, Slot
+
+from pygui.backend.license.license_manager import (
+    LICENSE_FILENAME_RE,
+    License,
+    parse_license_blob,
+    read_license_files,
+)
+
+log = logging.getLogger(__name__)
+
+TRIAL_DAYS = 30
+
+
+def _to_local_path(path_or_url: str) -> Path:
+    """Accept both plain paths and file:// URLs (QML FileDialog gives URLs)."""
+    if path_or_url.startswith("file:"):
+        return Path(unquote(urlparse(path_or_url).path))
+    return Path(path_or_url)
+
+
+# ===== License Model =====
+class LicenseModel(QObject):
+    """Context property backing the About dialog license grid.
+
+    Licenses live in ``<data_dir>/licenses`` (mirrors C#'s
+    ``DataDir\\licenses``). The 30-day replay trial marker is
+    ``<data_dir>/replay.lic``.
+    """
+
+    licensesChanged = Signal()
+
+    def __init__(self, data_dir: str, parent: QObject | None = None) -> None:
+        super().__init__(parent)
+        self._data_dir = Path(data_dir)
+        self._licenses_dir = self._data_dir / "licenses"
+        try:
+            self._licenses_dir.mkdir(parents=True, exist_ok=True)
+        except OSError as exc:
+            log.warning("Cannot create licenses dir %s: %s", self._licenses_dir, exc)
+        self._licenses: list[License] = []
+        self.refresh()
+
+    # ── Grid rows ─────────────────────────────────────────────────────
+    @Property("QVariantList", notify=licensesChanged)  # type: ignore[arg-type]
+    def licenses(self) -> list:
+        """Rows for the About grid: serial, mfg date, level, license date."""
+        return [
+            {
+                "serial": lic.serial,
+                "mfgDate": lic.mfg_date_decimal,
+                "level": lic.level,
+                "licDate": lic.lic_date_decimal,
+            }
+            for lic in self._licenses
+        ]
+
+    @Slot()
+    def refresh(self) -> None:
+        """Re-scan the licenses directory."""
+        self._licenses = read_license_files(self._licenses_dir)
+        self.licensesChanged.emit()
+
+    # ── Load License ──────────────────────────────────────────────────
+    @Slot(str, result=bool)
+    def loadLicenseFile(self, path_or_url: str) -> bool:
+        """Validate a picked .bin and copy it into the licenses directory."""
+        src = _to_local_path(path_or_url)
+        if not src.is_file():
+            log.warning("License file does not exist: %s", src)
+            return False
+        if not LICENSE_FILENAME_RE.match(src.name):
+            log.warning("License filename invalid: %s", src.name)
+            return False
+
+        try:
+            blob = src.read_bytes()
+        except OSError as exc:
+            log.warning("Cannot read license file %s: %s", src, exc)
+            return False
+
+        lic = parse_license_blob(blob)
+        if lic is None or src.name != f"{lic.serial}-{lic.level}.bin":
+            log.warning("License file failed validation: %s", src.name)
+            return False
+
+        try:
+            self._licenses_dir.mkdir(parents=True, exist_ok=True)
+            shutil.copyfile(src, self._licenses_dir / src.name)
+        except OSError as exc:
+            log.warning("Cannot copy license into %s: %s", self._licenses_dir, exc)
+            return False
+
+        self.refresh()
+        return True
+
+    # ── Wafer detect (informational) ──────────────────────────────────
+    @Slot(str, result=str)
+    def levelForWafer(self, serial: str) -> str:
+        """License level for a wafer serial like "A00001"; "" if unlicensed."""
+        for lic in self._licenses:
+            if lic.serial == serial:
+                return lic.level
+        return ""
+
+    # ── Replay trial (30-day marker, C# parity) ───────────────────────
+    @property
+    def _trial_marker(self) -> Path:
+        return self._data_dir / "replay.lic"
+
+    @Slot(result=str)
+    def replayLicenseState(self) -> str:
+        """"permanent" if any license level >= 1, "temporary" if trial
+        marker exists, else "none" (trial not started)."""
+        if any(lic.level_int >= 1 for lic in self._licenses):
+            return "permanent"
+        if self._trial_marker.exists():
+            return "temporary"
+        return "none"
+
+    @Slot(result=bool)
+    def startReplayTrial(self) -> bool:
+        """Create the trial marker (idempotent). False on I/O failure."""
+        try:
+            self._trial_marker.touch(exist_ok=True)
+            return True
+        except OSError as exc:
+            log.warning("Cannot create trial marker: %s", exc)
+            return False
+
+    @Slot(result=bool)
+    def replayTrialExpired(self) -> bool:
+        """True once the marker is older than 30 days (or missing)."""
+        marker = self._trial_marker
+        if not marker.exists():
+            return True
+        age_days = (time.time() - marker.stat().st_mtime) / 86400.0
+        return age_days > TRIAL_DAYS

src/pygui/backend/models/__init__.py

@@ -1,19 +0,0 @@
-# ===== Models Sub-package =====
-from pygui.backend.models.data_model import TemperatureTableModel
-from pygui.backend.models.frame import Frame
-from pygui.backend.models.frame_player import FramePlayer, frames_from_wafer_data
-from pygui.backend.models.frame_stats import Stats, compute_stats
-from pygui.backend.models.sensor_editor import SensorEditor
-from pygui.backend.models.session_model import SessionModel, SessionUpdate
-from pygui.backend.models.stability_detector import StabilityDetector
-from pygui.backend.models.threshold_classifier import ThresholdConfig, classify, resolve_bounds
-
-__all__ = [
-    "Frame", "FramePlayer", "frames_from_wafer_data",
-    "Stats", "compute_stats",
-    "SessionModel", "SessionUpdate",
-    "TemperatureTableModel",
-    "SensorEditor",
-    "ThresholdConfig", "classify", "resolve_bounds",
-    "StabilityDetector",
-]

src/pygui/backend/models/data_model.py

@@ -55,7 +55,7 @@ class TemperatureTableModel(QAbstractTableModel):
         # Column 0 = row index, columns 1..N = sensor values
         return self._col_count + 1
 
-    def data(self, index: Any, role: int = ...) -> Any:
+    def data(self, index: Any, role: int = ...) -> Any:  # type: ignore[assignment]
         if not index.isValid():
             return None
 
@@ -73,7 +73,7 @@ class TemperatureTableModel(QAbstractTableModel):
         return None
 
     def headerData(
-        self, section: int, orientation: int, role: int = ...
+        self, section: int, orientation: Qt.Orientation, role: int = ...  # type: ignore[assignment]
     ) -> Any:
         if role != Qt.ItemDataRole.DisplayRole:
             return None

src/pygui/backend/models/frame_player.py

@@ -4,10 +4,23 @@ from pygui.backend.models.frame import Frame
 from pygui.backend.wafer.zwafer_models import ZWaferData
 
 
-def frames_from_wafer_data(data: ZWaferData, records) -> list[Frame]:
+def frames_from_wafer_data(data: ZWaferData | None, records) -> list[Frame]:
     """Build Frames from parsed DataRecords (records = list[DataRecord].)"""
     return [Frame(seq=i, time=r.time, values=list(r.values)) for i, r in enumerate(records)]
 
+
+def all_sensor_series(frames: list[Frame]) -> tuple[list[str], list[list[float]]]:
+    """Per-sensor value series across every frame, for the whole-run Graph tab.
+
+    Sensor names are 1-based ("Sensor 1", ...), matching the C# original.
+    """
+    if not frames:
+        return [], []
+    n_sensors = len(frames[0].values)
+    names = [f"Sensor {i + 1}" for i in range(n_sensors)]
+    series = [[frame.values[i] for frame in frames] for i in range(n_sensors)]
+    return names, series
+
 class FramePlayer:
     def __init__(self) -> None:
         self._frames: list[Frame] =[]
@@ -22,6 +35,10 @@ class FramePlayer:
     def total(self) -> int:
         return len(self._frames)
 
+    @property
+    def frames(self) -> tuple[Frame, ...]:
+        return tuple(self._frames)
+
     @property
     def index(self) -> int:
         return self._i

src/pygui/backend/models/frame_stats.py

@@ -14,6 +14,44 @@ class Stats:
     sigma: float; three_sigma: float
 
 
+@dataclass(frozen=True)
+class EdgeCenterStats:
+    min_edge_index: int; min_center_index: int
+    min_edge: float; min_center: float; min_delta: float
+    max_edge_index: int; max_center_index: int
+    max_edge: float; max_center: float; max_delta: float
+
+
+def compute_edge_center(
+    values: list[float],
+    pairs: tuple[tuple[int, int], ...],
+    excluded: set[int],
+) -> EdgeCenterStats | None:
+    """Min/max |edge - center| over the family's pair table.
+
+    Pairs with an excluded (replaced) sensor, an index outside the frame, or a
+    NaN value are skipped. Returns None when no pair is computable.
+    """
+    n = len(values)
+    best: list[tuple[float, int, int]] = []
+    for e, c in pairs:
+        if e in excluded or c in excluded or e >= n or c >= n:
+            continue
+        if math.isnan(values[e]) or math.isnan(values[c]):
+            continue
+        best.append((abs(values[e] - values[c]), e, c))
+    if not best:
+        return None
+    min_d, min_e, min_c = min(best)
+    max_d, max_e, max_c = max(best)
+    return EdgeCenterStats(
+        min_edge_index=min_e, min_center_index=min_c,
+        min_edge=values[min_e], min_center=values[min_c], min_delta=min_d,
+        max_edge_index=max_e, max_center_index=max_c,
+        max_edge=values[max_e], max_center=values[max_c], max_delta=max_d,
+    )
+
+
 def compute_stats(values: list[float]) -> Stats:
     clean = [(i, v) for i, v in enumerate(values) if not math.isnan(v)]
     if not clean:

src/pygui/backend/models/sensor_editor.py

@@ -28,6 +28,11 @@ class SensorEditor:
     def has_overrides(self) -> bool:
         return bool(self._replacements or self._offsets)
 
+    def replaced_indices(self) -> set[int]:
+        """Sensors whose value is a replacement (offsets don't count — an
+        offset sensor still reads from its physical location)."""
+        return set(self._replacements)
+
     def active_indices(self) -> list[int]:
         """Return sorted sensor indices that have any override."""
         return sorted(set(self._replacements) | set(self._offsets))

src/pygui/backend/visualization/__init__.py

@@ -1,11 +0,0 @@
-# ===== Visualization Sub-package =====
-from pygui.backend.visualization.graph_quick_item import GraphQuickItem
-from pygui.backend.visualization.graph_view import GraphView
-from pygui.backend.visualization.rbf_heatmap import interpolate_field
-from pygui.backend.visualization.trend_chart_item import TrendChartItem
-from pygui.backend.visualization.wafer_map_item import WaferMapItem
-
-__all__ = [
-    "GraphQuickItem", "GraphView", "TrendChartItem", "WaferMapItem",
-    "interpolate_field",
-]

src/pygui/backend/visualization/chart_geometry.py

@@ -0,0 +1,52 @@
+"""Pure coordinate-mapping math shared by the QQuickPaintedItem chart items
+(GraphQuickItem, TrendChartItem). No QPainter or Qt-widget dependency, so
+it's testable without a GUI — unlike the paint() methods that call it.
+"""
+from __future__ import annotations
+
+
+def value_to_pixel(
+    value: float,
+    value_min: float,
+    value_max: float,
+    pixel_start: float,
+    pixel_span: float,
+) -> float:
+    """Map a value onto a pixel range, inverted so larger values sit at
+    smaller pixel coordinates (screen y grows downward).
+
+    Also used for evenly-spaced tick indices: pass the tick index as
+    `value` and `(tick_count - 1)` as `value_max` with `value_min=0`.
+    """
+    value_range = value_max - value_min
+    if value_range < 1e-9:
+        return pixel_start + pixel_span / 2
+    fraction = 1.0 - (value - value_min) / value_range
+    return pixel_start + fraction * pixel_span
+
+
+def index_to_pixel(index: float, count: int, pixel_start: float, pixel_span: float) -> float:
+    """Map a 0-based sample index onto a pixel range, left to right."""
+    if count <= 1:
+        return pixel_start + pixel_span / 2
+    fraction = index / (count - 1)
+    return pixel_start + fraction * pixel_span
+
+
+def elapsed_to_pixel(
+    elapsed: float,
+    window_start: float,
+    window_end: float,
+    pixel_start: float,
+    pixel_span: float,
+) -> float:
+    """Map an elapsed-seconds value onto a pixel range, left to right.
+
+    Unlike `value_to_pixel`, this is not inverted: larger elapsed values sit
+    at larger pixel x-coordinates, matching how time flows left-to-right.
+    """
+    window_span = window_end - window_start
+    if window_span < 1e-9:
+        return pixel_start + pixel_span
+    fraction = (elapsed - window_start) / window_span
+    return pixel_start + fraction * pixel_span

src/pygui/backend/visualization/graph_quick_item.py

@@ -21,15 +21,60 @@ Usage from QML::
 
 from __future__ import annotations
 
-from PySide6.QtCore import Property, QRectF, Qt, Signal
+import math
+
+from PySide6.QtCore import Property, QRectF, Qt, Signal, Slot
 from PySide6.QtGui import QColor, QFont, QFontMetrics, QPainter, QPen
 from PySide6.QtQml import QmlElement
 from PySide6.QtQuick import QQuickPaintedItem
 
+from pygui.backend.visualization.chart_geometry import index_to_pixel, value_to_pixel
+
 QML_IMPORT_NAME = "ISC.Wafer"
 QML_IMPORT_MAJOR_VERSION = 1
 
 
+def viewport_stats(
+    series: list[list[float]],
+    names: list[str],
+    start: int,
+    end: int,
+) -> tuple[float, float, float, str, str]:
+    """Aggregate min/max/avg across every sensor's points in `[start, end]`.
+
+    Mirrors PopupChartForm.cs's `recalc_stats`: one running min/max/avg over
+    every visible point from every series, plus which sensor achieved each
+    extreme. Non-numeric values are skipped. No points in range -> zeros and
+    empty sensor names.
+    """
+    vmin = math.inf
+    vmax = -math.inf
+    total = 0.0
+    count = 0
+    min_sensor = ""
+    max_sensor = ""
+    for i, s in enumerate(series):
+        name = names[i] if i < len(names) else ""
+        lo = max(0, start)
+        hi = min(len(s) - 1, end)
+        for j in range(lo, hi + 1):
+            try:
+                v = float(s[j])
+            except (TypeError, ValueError):
+                continue
+            if v < vmin:
+                vmin = v
+                min_sensor = name
+            if v > vmax:
+                vmax = v
+                max_sensor = name
+            total += v
+            count += 1
+    if count == 0:
+        return (0.0, 0.0, 0.0, "", "")
+    return (vmin, vmax, total / count, min_sensor, max_sensor)
+
+
 @QmlElement
 class GraphQuickItem(QQuickPaintedItem):
     """Painted line chart; driven by series data passed via QML property bindings."""
@@ -40,6 +85,8 @@ class GraphQuickItem(QQuickPaintedItem):
     xLabelChanged = Signal()
     yLabelChanged = Signal()
     colorsChanged = Signal()
+    viewportChanged = Signal()
+    viewStatsChanged = Signal()
 
     def __init__(self, parent=None) -> None:
         super().__init__(parent)
@@ -72,16 +119,37 @@ class GraphQuickItem(QQuickPaintedItem):
         self._max_y: float = 150.0
         self._padding: dict[str, int] = {"left": 60, "right": 20, "top": 30, "bottom": 50}
 
+        # Viewport (replay chart zoom/pan): defaults reproduce "whole series",
+        # so the Graph tab (which never sets these) is unaffected. See
+        # docs/adr/0004-graphquickitem-viewport-for-replay-chart.md.
+        self._view_start: int = 0
+        self._view_end: int = -1
+        self._show_min_max_markers: bool = False
+        self._view_min: float = 0.0
+        self._view_max: float = 0.0
+        self._view_avg: float = 0.0
+        self._view_min_sensor: str = ""
+        self._view_max_sensor: str = ""
+
     # ── Qt properties (QML-bindable) ──────────────────────────────────────────
 
     @Property("QVariantList", notify=seriesDataChanged)
     def seriesData(self) -> list:
         return self._series_data
 
-    @seriesData.setter
+    @seriesData.setter  # type: ignore[no-redef]
     def seriesData(self, val: list) -> None:
         self._series_data = [list(s) for s in (val or [])]
+        # New data resets the viewport to the full range -- matches
+        # PopupChartForm.cs's SetData(), which resets AxisX.Minimum/Maximum
+        # before RecalculateAxesScale(). Without this, a stale viewport left
+        # over from a previous (longer) series can point entirely past the
+        # new data -- every per-series slice becomes empty and the chart
+        # silently renders nothing instead of the new data.
+        self._view_start = 0
+        self._view_end = -1
         self._auto_range()
+        self._recompute_view_stats()
         self.seriesDataChanged.emit()
         self.update()
 
@@ -89,17 +157,138 @@ class GraphQuickItem(QQuickPaintedItem):
     def sensorNames(self) -> list:
         return self._sensor_names
 
-    @sensorNames.setter
+    @sensorNames.setter  # type: ignore[no-redef]
     def sensorNames(self, val: list) -> None:
         self._sensor_names = list(val or [])
+        self._recompute_view_stats()
         self.sensorNamesChanged.emit()
         self.update()
 
+    # ── Viewport properties (replay chart zoom/pan) ────────────────────────
+
+    @Property(int, notify=viewportChanged)
+    def viewStartIndex(self) -> int:
+        return self._view_start
+
+    @viewStartIndex.setter  # type: ignore[no-redef]
+    def viewStartIndex(self, val: int) -> None:
+        v = max(0, int(val))
+        if v == self._view_start:
+            return
+        self._view_start = v
+        self._on_viewport_changed()
+
+    @Property(int, notify=viewportChanged)
+    def viewEndIndex(self) -> int:
+        return self._view_end
+
+    @viewEndIndex.setter  # type: ignore[no-redef]
+    def viewEndIndex(self, val: int) -> None:
+        v = int(val)
+        if v == self._view_end:
+            return
+        self._view_end = v
+        self._on_viewport_changed()
+
+    @Property(bool, notify=viewportChanged)
+    def showMinMaxMarkers(self) -> bool:
+        return self._show_min_max_markers
+
+    @showMinMaxMarkers.setter  # type: ignore[no-redef]
+    def showMinMaxMarkers(self, val: bool) -> None:
+        v = bool(val)
+        if v == self._show_min_max_markers:
+            return
+        self._show_min_max_markers = v
+        self.viewportChanged.emit()
+        self.update()
+
+    @Property(float, notify=viewStatsChanged)
+    def viewMin(self) -> float:
+        return self._view_min
+
+    @Property(float, notify=viewStatsChanged)
+    def viewMax(self) -> float:
+        return self._view_max
+
+    @Property(float, notify=viewStatsChanged)
+    def viewAvg(self) -> float:
+        return self._view_avg
+
+    @Property(str, notify=viewStatsChanged)
+    def viewMinSensor(self) -> str:
+        return self._view_min_sensor
+
+    @Property(str, notify=viewStatsChanged)
+    def viewMaxSensor(self) -> str:
+        return self._view_max_sensor
+
+    # ── Zoom/pan slots (replay chart interaction; QML MouseArea calls these
+    #    with fractions derived from wheel/drag pixel deltas) ───────────────
+
+    @Slot(float, float)
+    def zoomAtFraction(self, frac: float, factor: float) -> None:
+        """Zoom the viewport around a fractional X position within it.
+
+        `frac` in [0, 1] is where within the current viewport to zoom around;
+        `factor < 1` narrows the window (zoom in), `factor > 1` widens it
+        (zoom out). Clamped to data bounds and a minimum 1-index window.
+        """
+        max_len = max((len(s) for s in self._series_data), default=0)
+        if max_len < 2:
+            return
+        start = float(self._view_start)
+        end = float(self._resolved_view_end())
+        width = max(1.0, end - start)
+        f = max(0.0, min(1.0, frac))
+        center = start + f * width
+        new_width = max(1.0, min(float(max_len - 1), width * max(0.01, factor)))
+        new_start = center - f * new_width
+        new_end = new_start + new_width
+        self._set_viewport_clamped(new_start, new_end, max_len)
+
+    @Slot(float)
+    def panByFraction(self, delta_frac: float) -> None:
+        """Shift the viewport by `delta_frac * window_width` indices."""
+        max_len = max((len(s) for s in self._series_data), default=0)
+        if max_len < 2:
+            return
+        start = float(self._view_start)
+        end = float(self._resolved_view_end())
+        width = max(1.0, end - start)
+        shift = delta_frac * width
+        self._set_viewport_clamped(start + shift, end + shift, max_len)
+
+    @Slot()
+    def resetZoom(self) -> None:
+        """Restore the full-range viewport sentinel (0, -1)."""
+        self._set_viewport(0, -1)
+
+    def _set_viewport_clamped(self, new_start: float, new_end: float, max_len: int) -> None:
+        if new_start < 0.0:
+            new_end -= new_start
+            new_start = 0.0
+        if new_end > max_len - 1:
+            new_start -= new_end - (max_len - 1)
+            new_end = float(max_len - 1)
+        new_start = max(0.0, new_start)
+        self._set_viewport(int(round(new_start)), int(round(new_end)))
+
+    def _set_viewport(self, start: int, end: int) -> None:
+        """Set the viewport bounds directly (not through the QML-facing
+        property setters, so this stays a plain attribute write for mypy)."""
+        new_start = max(0, start)
+        if new_start == self._view_start and end == self._view_end:
+            return
+        self._view_start = new_start
+        self._view_end = end
+        self._on_viewport_changed()
+
     @Property(str, notify=titleChanged)
     def title(self) -> str:
         return self._title
 
-    @title.setter
+    @title.setter  # type: ignore[no-redef]
     def title(self, val: str) -> None:
         self._title = str(val or "")
         self.titleChanged.emit()
@@ -109,7 +298,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def xLabel(self) -> str:
         return self._x_label
 
-    @xLabel.setter
+    @xLabel.setter  # type: ignore[no-redef]
     def xLabel(self, val: str) -> None:
         self._x_label = str(val or "")
         self.xLabelChanged.emit()
@@ -119,7 +308,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def yLabel(self) -> str:
         return self._y_label
 
-    @yLabel.setter
+    @yLabel.setter  # type: ignore[no-redef]
     def yLabel(self, val: str) -> None:
         self._y_label = str(val or "")
         self.yLabelChanged.emit()
@@ -129,7 +318,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def showLegend(self) -> bool:
         return self._show_legend
 
-    @showLegend.setter
+    @showLegend.setter  # type: ignore[no-redef]
     def showLegend(self, val: bool) -> None:
         self._show_legend = bool(val)
         self.colorsChanged.emit()
@@ -141,7 +330,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def backgroundColor(self) -> QColor:
         return self._bg_color
 
-    @backgroundColor.setter
+    @backgroundColor.setter  # type: ignore[no-redef]
     def backgroundColor(self, c: QColor) -> None:
         self._bg_color = c
         self.update()
@@ -150,7 +339,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def gridColor(self) -> QColor:
         return self._grid_color
 
-    @gridColor.setter
+    @gridColor.setter  # type: ignore[no-redef]
     def gridColor(self, c: QColor) -> None:
         self._grid_color = c
         self.update()
@@ -159,7 +348,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def axisColor(self) -> QColor:
         return self._axis_color
 
-    @axisColor.setter
+    @axisColor.setter  # type: ignore[no-redef]
     def axisColor(self, c: QColor) -> None:
         self._axis_color = c
         self.update()
@@ -168,7 +357,7 @@ class GraphQuickItem(QQuickPaintedItem):
     def textColor(self) -> QColor:
         return self._text_color
 
-    @textColor.setter
+    @textColor.setter  # type: ignore[no-redef]
     def textColor(self, c: QColor) -> None:
         self._text_color = c
         self.update()
@@ -178,7 +367,7 @@ class GraphQuickItem(QQuickPaintedItem):
         """Return hex strings of the current series color palette."""
         return [c.name() for c in self._series_colors]
 
-    @seriesColors.setter
+    @seriesColors.setter  # type: ignore[no-redef]
     def seriesColors(self, hex_list: list) -> None:
         colors = []
         for h in (hex_list or []):
@@ -192,13 +381,38 @@ class GraphQuickItem(QQuickPaintedItem):
 
     # ── internal ──────────────────────────────────────────────────────────────
 
+    def _resolved_view_end(self) -> int:
+        """`viewEndIndex` with the -1 ("last index") sentinel resolved."""
+        max_len = max((len(s) for s in self._series_data), default=0)
+        if self._view_end < 0 or self._view_end > max_len - 1:
+            return max_len - 1
+        return self._view_end
+
+    def _on_viewport_changed(self) -> None:
+        self._auto_range()
+        self._recompute_view_stats()
+        self.viewportChanged.emit()
+        self.update()
+
+    def _recompute_view_stats(self) -> None:
+        end = self._resolved_view_end()
+        vmin, vmax, avg, min_sensor, max_sensor = viewport_stats(
+            self._series_data, self._sensor_names, self._view_start, end
+        )
+        self._view_min, self._view_max, self._view_avg = vmin, vmax, avg
+        self._view_min_sensor, self._view_max_sensor = min_sensor, max_sensor
+        self.viewStatsChanged.emit()
+
     def _auto_range(self) -> None:
-        """Set Y range to cover all data with 10% padding."""
+        """Set Y range to cover the current viewport's data with 10% padding."""
+        start = max(0, self._view_start)
+        end = self._resolved_view_end()
         all_vals: list[float] = []
         for series in self._series_data:
-            for v in series:
+            hi = min(len(series) - 1, end)
+            for i in range(start, hi + 1):
                 try:
-                    all_vals.append(float(v))
+                    all_vals.append(float(series[i]))
                 except (ValueError, TypeError):
                     pass
         if not all_vals:
@@ -275,8 +489,7 @@ class GraphQuickItem(QQuickPaintedItem):
 
         for i in range(n_y_ticks):
             y_val = self._min_y + i * y_step
-            y_frac = 1.0 - (i / (n_y_ticks - 1)) if n_y_ticks > 1 else 0.5
+            y_px = value_to_pixel(i, 0, n_y_ticks - 1, plot_top, plot_h)
-            y_px = plot_top + y_frac * plot_h
 
             # Grid line
             painter.setPen(grid_pen)
@@ -318,19 +531,23 @@ class GraphQuickItem(QQuickPaintedItem):
                 self._x_label,
             )
 
-        # --- X-axis ticks ---
+        # --- Viewport slice (replay chart zoom/pan; full range by default,
-        num_points = max(len(s) for s in self._series_data) if self._series_data else 0
+        #     so unset viewport reproduces the pre-viewport rendering) ---
-        if num_points > 1:
+        view_start = max(0, self._view_start)
-            n_x_ticks = min(num_points, max(2, int(plot_w // 80)))
+        view_end = self._resolved_view_end()
-            x_tick_step = (num_points - 1) / max(1, n_x_ticks - 1)
+        view_len = max(1, view_end - view_start + 1)
+
+        # --- X-axis ticks (labelled in original, non-sliced index space) ---
+        if view_len > 1:
+            n_x_ticks = min(view_len, max(2, int(plot_w // 80)))
+            x_tick_step = (view_len - 1) / max(1, n_x_ticks - 1)
             for i in range(n_x_ticks):
-                idx = int(round(i * x_tick_step))
+                rel_idx = int(round(i * x_tick_step))
-                x_frac = idx / (num_points - 1)
+                x_px = index_to_pixel(rel_idx, view_len, plot_left, plot_w)
-                x_px = plot_left + x_frac * plot_w
                 painter.setPen(axis_pen)
                 painter.drawText(
                     int(x_px - 12), int(plot_top + plot_h + 14),
-                    str(idx + 1),
+                    str(view_start + rel_idx + 1),
                 )
 
         # --- Axes boundary ---
@@ -339,30 +556,36 @@ class GraphQuickItem(QQuickPaintedItem):
         painter.drawLine(int(plot_left), int(plot_top), int(plot_left), int(plot_top + plot_h))
         painter.drawLine(int(plot_left), int(plot_top + plot_h), int(plot_left + plot_w), int(plot_top + plot_h))
 
-        # --- Figure out max series length ---
+        # --- Draw each series (sliced to the current viewport) ---
-        max_len = max(len(s) for s in self._series_data) if self._series_data else 0
+        min_pt: tuple[float, float] | None = None
-        if max_len < 1:
+        max_pt: tuple[float, float] | None = None
-            return
+        min_seen = math.inf
-
+        max_seen = -math.inf
-        # --- Draw each series ---
         for si, series in enumerate(self._series_data):
-            if len(series) < 1:
+            hi = min(len(series) - 1, view_end)
+            sliced = series[view_start:hi + 1] if view_start <= hi else []
+            if not sliced:
                 continue
             color = self._series_colors[si % len(self._series_colors)]
             pen = QPen(color, 2)
             painter.setPen(pen)
 
             pts: list[tuple[float, float]] = []
-            for i, val in enumerate(series):
+            for i, val in enumerate(sliced):
                 try:
                     v = float(val)
                 except (ValueError, TypeError):
                     continue
-                x_frac = i / (max_len - 1) if max_len > 1 else 0.5
+                x_px = index_to_pixel(i, view_len, plot_left, plot_w)
-                y_frac = 1.0 - ((v - self._min_y) / y_range) if y_range > 0 else 0.5
+                y_px = value_to_pixel(v, self._min_y, self._max_y, plot_top, plot_h)
-                x_px = plot_left + x_frac * plot_w
-                y_px = plot_top + y_frac * plot_h
                 pts.append((x_px, y_px))
+                if self._show_min_max_markers:
+                    if v < min_seen:
+                        min_seen = v
+                        min_pt = (x_px, y_px)
+                    if v > max_seen:
+                        max_seen = v
+                        max_pt = (x_px, y_px)
 
             if len(pts) < 2:
                 if len(pts) == 1:
@@ -375,6 +598,19 @@ class GraphQuickItem(QQuickPaintedItem):
                     int(pts[i + 1][0]), int(pts[i + 1][1]),
                 )
 
+        # --- Min/max markers (replay chart only; PopupChartForm.cs parity) ---
+        if self._show_min_max_markers:
+            marker_font = QFont()
+            marker_font.setPixelSize(14)
+            marker_font.setBold(True)
+            painter.setFont(marker_font)
+            if max_pt is not None:
+                painter.setPen(QPen(QColor("#FF5757")))
+                painter.drawText(int(max_pt[0] - 6), int(max_pt[1] - 8), "▼")
+            if min_pt is not None:
+                painter.setPen(QPen(QColor("#42A5F5")))
+                painter.drawText(int(min_pt[0] - 6), int(min_pt[1] + 18), "▲")
+
         # --- Legend ---
         if self._show_legend and self._sensor_names:
             legend_font = QFont()

src/pygui/backend/visualization/graph_view.py

@@ -23,6 +23,9 @@ class GraphView(QObject):
     each sensor as a separate line series.
     """
 
+    # Set lazily in updateTrend (guarded by hasattr); declared for mypy.
+    _trend_line: Any
+
     # ---- signals ----
     dataReady = Signal(object)  # {"success": bool, "sensory_names": list, "series": list}
 
@@ -227,7 +230,7 @@ class GraphView(QObject):
             index_a, index_b = path[i]
             if index_a < len(a) and index_b < len(b):
                 line = pg.InfiniteLine(pos=index_a, angle=90, pen=pg.mkPen("#666666", width=1,
-                style=Qt.DashLine))
+                style=Qt.PenStyle.DashLine))
                 self._plot_widget.addItem(line)
 
             self._plot_widget.setTitle("DTW Comparison")

src/pygui/backend/visualization/rbf_heatmap.py

@@ -6,6 +6,7 @@ from __future__ import annotations
 
 import numpy as np
 from scipy.interpolate import RBFInterpolator
+from scipy.ndimage import zoom as _ndi_zoom
 
 try:
     import cupy as _cupy  # type: ignore
@@ -17,6 +18,17 @@ except Exception:
 _KERNEL = "thin_plate_spline"
 _SMOOTHING = 0.0
 
+# Sensor density (≤244 points) carries no more spatial information than this;
+# evaluating on a bigger grid than the widget's pixel size just burns CPU that
+# a GPU-bilinear QImage upscale reproduces visually. See alpha-release-polish-plan.md §2.2.
+GRID_RES = 100
+
+# Bilinear-scaling the raw 100x100 field straight to widget size shows visible
+# facets on real (higher-contrast) sensor data. A cheap cubic pre-smooth of the
+# field (RBF grid is the expensive part; resampling a small array is not) removes
+# the facets before the final QImage upscale does the rest.
+REFINE_FACTOR = 2
+
 
 def interpolate_field(
     xs: np.ndarray,
@@ -28,26 +40,30 @@ def interpolate_field(
     extent: tuple[float, float, float, float],  # (xmin, xmax, ymin, ymax) in mm
     round_clip: bool = False,
 ) -> np.ndarray:
-    """Return a (height, width) float64 array of interpolated values.
+    """Return a float64 array of interpolated values, capped at GRID_RES per side.
 
     Args:
         xs, ys:      sensor positions in mm (1-D arrays, length N)
         vs:          sensor values (length N)
-        width/height: output grid dimensions in pixels
+        width/height: desired output dimensions in pixels; the grid is solved at
+                      min(dim, GRID_RES) and the caller upscales the resulting image
         extent:      (xmin, xmax, ymin, ymax) in the same mm space as xs/ys
         round_clip:  if True, pixels outside the inscribed ellipse become NaN
     """
     coords = np.column_stack([xs, ys])
     rbf = RBFInterpolator(coords, vs, kernel=_KERNEL, smoothing=_SMOOTHING)
 
+    grid_w = min(width, GRID_RES)
+    grid_h = min(height, GRID_RES)
+
     xmin, xmax, ymin, ymax = extent
-    gx = np.linspace(xmin, xmax, width)
+    gx = np.linspace(xmin, xmax, grid_w)
-    gy = np.linspace(ymin, ymax, height)
+    gy = np.linspace(ymin, ymax, grid_h)
     grid_x, grid_y = np.meshgrid(gx, gy)
     flat = np.column_stack([grid_x.ravel(), grid_y.ravel()])
 
     # RBFInterpolator always runs on CPU; CuPy only accelerates other ops if added later
-    field = rbf(flat).reshape(height, width)
+    field = rbf(flat).reshape(grid_h, grid_w)
 
     if round_clip:
         cx = (xmin + xmax) / 2
@@ -57,5 +73,33 @@ def interpolate_field(
         dist = ((grid_x - cx) / rx) ** 2 + ((grid_y - cy) / ry) ** 2
         field = np.where(dist <= 1.0, field, np.nan)
 
-    return field.astype(np.float64)
+    result: np.ndarray = field.astype(np.float64)
+    return result
+
+
+def refine_field(field: np.ndarray, factor: int = REFINE_FACTOR) -> np.ndarray:
+    """Cubic-upsample a coarse (NaN-free) field by `factor`.
+
+    Callers that need a circular boundary should pass an *unclipped* field
+    (round_clip=False) and mask with ellipse_alpha() afterwards — cubic
+    resampling across a NaN/zero-filled hole rings at the boundary, and any
+    mask derived from the coarse grid keeps its staircase when upscaled.
+    """
+    refined: np.ndarray = _ndi_zoom(field, factor, order=3)
+    return refined
+
+
+def ellipse_alpha(height: int, width: int, feather_px: float = 1.2) -> np.ndarray:
+    """Anti-aliased coverage mask (0..1) of the ellipse inscribed in the grid.
+
+    Computed analytically at the target resolution — unlike upsampling a
+    binary clip mask from the coarse RBF grid, this cannot show grid steps.
+    `feather_px` is the half-width of the linear edge ramp, in grid pixels.
+    """
+    y = (np.arange(height) + 0.5) / height * 2.0 - 1.0
+    x = (np.arange(width) + 0.5) / width * 2.0 - 1.0
+    yy, xx = np.meshgrid(y, x, indexing="ij")
+    r = np.sqrt(xx * xx + yy * yy)
+    f = feather_px * 2.0 / min(width, height)
+    return np.clip((1.0 - r) / f + 0.5, 0.0, 1.0)
 

src/pygui/backend/visualization/trend_chart_item.py

@@ -1,12 +1,15 @@
 """QQuickPaintedItem trend chart — running-average temperature over time.
 
-Renders a single polyline series (per-frame average temperatures) using QPainter.
+Renders a single polyline series (per-frame average temperatures) over a fixed
-Mirrors the @QmlElement registration pattern used by `WaferMapItem` so it can
+0-200°C Y axis and an elapsed-seconds X axis, using a bounded 60-second
-be embedded directly in QML via `import ISC.Wafer` and used as `TrendChartItem { }`.
+rolling window. Mirrors the @QmlElement registration pattern used by
+`WaferMapItem` so it can be embedded directly in QML via `import ISC.Wafer`
+and used as `TrendChartItem { }`.
 
-The series is driven by the existing `streamController.trendData` signal, which
+The series is driven by `streamController.trendDelta` (one new
-emits a JSON-encoded list of floats from both review-mode replay and live-mode
+`[elapsed_s, value]` point per live frame) and cleared on
-streaming.
+`streamController.trendReset` (new stream started). See
+docs/adr/0001-trend-chart-axes-standardization.md.
 """
 from __future__ import annotations
 
@@ -19,17 +22,23 @@ from PySide6.QtGui import QColor, QFont, QPainter, QPen, QPolygon
 from PySide6.QtQml import QmlElement
 from PySide6.QtQuick import QQuickPaintedItem
 
+from pygui.backend.visualization.chart_geometry import elapsed_to_pixel, value_to_pixel
+
 log = logging.getLogger(__name__)
 
 QML_IMPORT_NAME = "ISC.Wafer"
 QML_IMPORT_MAJOR_VERSION = 1
 
+WINDOW_SECONDS = 60.0
+Y_MIN = 0.0
+Y_MAX = 200.0
+Y_TICKS = (0, 40, 80, 120, 160, 200)
+
 
 @QmlElement
 class TrendChartItem(QQuickPaintedItem):
-    """Painted trend chart; driven by a list of floats via the `data` property."""
+    """Painted trend chart; driven by incremental (elapsed_s, value) points."""
 
-    dataChanged = Signal()
     hasDataChanged = Signal()
     lineColorChanged = Signal()
     gridColorChanged = Signal()
@@ -42,41 +51,35 @@ class TrendChartItem(QQuickPaintedItem):
         self.setAntialiasing(True)
         self.setFillColor(QColor("transparent"))
 
-        self._data: list[float] = []
+        self._points: list[tuple[float, float]] = []
         self._padding: int = 8
+        # Separate from `_padding` (breathing room around the plot area): these
+        # reserve space for the axis labels themselves, which are wider than
+        # `_padding` alone — that mismatch is what clipped y-axis text before.
+        self._margin_left: int = 48
+        self._margin_bottom: int = 30
+        # Top tick label is drawn centered on the plot's top edge (y_px - 7),
+        # so the plot needs headroom or the label kisses the card border.
+        self._margin_top: int = 10
         self._line_color = QColor("#5B9DF5")
         self._grid_color = QColor("#2A3441")
         self._text_color = QColor("#CBD5E1")
 
     # ── Qt properties ─────────────────────────────────────────────────────
 
-    @Property("QVariantList", notify=dataChanged)
-    def data(self) -> list[float]:
-        return self._data
-
-    @data.setter
-    def data(self, val) -> None:
-        coerced = self._coerce_floats(val)
-        if coerced == self._data:
-            return
-        self._data = coerced
-        self.dataChanged.emit()
-        self.hasDataChanged.emit()
-        self.update()
-
     @Property(bool, notify=hasDataChanged)
     def hasData(self) -> bool:
-        """True when the data list has at least one point.
+        """True when at least one point is buffered.
 
-        QML can bind to this safely (QVariantList `.length` is not bindable).
+        QML can bind to this safely (a plain list length is not bindable).
         """
-        return len(self._data) > 0
+        return len(self._points) > 0
 
     @Property(QColor, notify=lineColorChanged)
     def lineColor(self) -> QColor:
         return self._line_color
 
-    @lineColor.setter
+    @lineColor.setter  # type: ignore[no-redef]
     def lineColor(self, c: QColor) -> None:
         if c == self._line_color:
             return
@@ -88,7 +91,7 @@ class TrendChartItem(QQuickPaintedItem):
     def gridColor(self) -> QColor:
         return self._grid_color
 
-    @gridColor.setter
+    @gridColor.setter  # type: ignore[no-redef]
     def gridColor(self, c: QColor) -> None:
         if c == self._grid_color:
             return
@@ -100,7 +103,7 @@ class TrendChartItem(QQuickPaintedItem):
     def textColor(self) -> QColor:
         return self._text_color
 
-    @textColor.setter
+    @textColor.setter  # type: ignore[no-redef]
     def textColor(self, c: QColor) -> None:
         if c == self._text_color:
             return
@@ -112,7 +115,7 @@ class TrendChartItem(QQuickPaintedItem):
     def padding(self) -> int:
         return self._padding
 
-    @padding.setter
+    @padding.setter  # type: ignore[no-redef]
     def padding(self, val: int) -> None:
         v = max(0, int(val))
         if v == self._padding:
@@ -121,24 +124,48 @@ class TrendChartItem(QQuickPaintedItem):
         self.paddingChanged.emit()
         self.update()
 
-    # ── Convenience slot for QML: accept a JSON string from a Signal(str) ──
+    # ── slots for QML: streamController.trendDelta / trendReset ────────────
 
     @Slot(str)
-    def setDataFromJson(self, avgs_json: str) -> None:
+    def appendDelta(self, delta_json: str) -> None:
-        """Slot for QML Connections handler: parse JSON array and update data.
+        """Append new (elapsed_s, value) points and prune the 60s window.
 
-        Mirrors `streamController.trendData` (which emits JSON-encoded floats).
+        Mirrors `streamController.trendDelta`, which emits one new pair per
+        live frame as `[[elapsed_s, value], ...]`.
         """
         try:
-            parsed = json.loads(avgs_json) if avgs_json else []
+            parsed = json.loads(delta_json) if delta_json else []
         except (json.JSONDecodeError, TypeError) as exc:
-            log.error("TrendChartItem: failed to parse trend JSON: %s", exc)
+            log.error("TrendChartItem: failed to parse trend delta JSON: %s", exc)
             return
-        coerced = self._coerce_floats(parsed)
+
-        if coerced == self._data:
+        had_data = len(self._points) > 0
+        added = False
+        for pair in parsed:
+            try:
+                elapsed, value = float(pair[0]), float(pair[1])
+            except (TypeError, ValueError, IndexError):
+                continue
+            self._points.append((elapsed, value))
+            added = True
+
+        if not added:
             return
-        self._data = coerced
+
-        self.dataChanged.emit()
+        latest_elapsed = self._points[-1][0]
+        cutoff = latest_elapsed - WINDOW_SECONDS
+        self._points = [p for p in self._points if p[0] >= cutoff]
+
+        if not had_data:
+            self.hasDataChanged.emit()
+        self.update()
+
+    @Slot()
+    def clearTrend(self) -> None:
+        """Clear all buffered points (new stream started)."""
+        if not self._points:
+            return
+        self._points = []
         self.hasDataChanged.emit()
         self.update()
 
@@ -153,57 +180,39 @@ class TrendChartItem(QQuickPaintedItem):
         if w <= 0 or h <= 0:
             return
 
-        plot_rect = QRectF(self._padding, self._padding,
+        left = self._padding + self._margin_left
-                           max(1, w - 2 * self._padding),
+        top = self._padding + self._margin_top
-                           max(1, h - 2 * self._padding))
+        bottom_inset = self._padding + self._margin_bottom
+        plot_rect = QRectF(left, top,
+                           max(1, w - left - self._padding),
+                           max(1, h - top - bottom_inset))
 
         self._draw_grid(painter, plot_rect)
 
-        if len(self._data) < 2:
+        if len(self._points) < 2:
             return
 
-        y_min, y_max = self._y_range()
+        window_end = self._points[-1][0]
-        self._draw_axes_labels(painter, plot_rect, y_min, y_max)
+        window_start = max(0.0, window_end - WINDOW_SECONDS)
-        self._draw_line(painter, plot_rect, y_min, y_max)
+        self._draw_axes_labels(painter, plot_rect, window_start, window_end)
+        self._draw_line(painter, plot_rect, window_start, window_end)
 
     # ── internals ─────────────────────────────────────────────────────────
 
-    def _coerce_floats(self, val) -> list[float]:
+    def _x_to_px(self, elapsed: float, window_start: float, window_end: float, plot_rect: QRectF) -> float:
-        if not val:
+        return elapsed_to_pixel(elapsed, window_start, window_end, plot_rect.left(), plot_rect.width())
-            return []
-        out: list[float] = []
-        for v in val:
-            try:
-                out.append(float(v))
-            except (TypeError, ValueError):
-                continue
-        return out
 
-    def _y_range(self) -> tuple[float, float]:
+    def _y_to_px(self, value: float, plot_rect: QRectF) -> float:
-        lo = min(self._data)
+        px = value_to_pixel(value, Y_MIN, Y_MAX, plot_rect.top(), plot_rect.height())
-        hi = max(self._data)
+        # Clamp: a sensor reading outside 0-200°C shouldn't paint outside the widget.
-        if hi - lo < 1e-9:
+        return max(plot_rect.top(), min(plot_rect.bottom(), px))
-            return lo - 5.0, hi + 5.0
-        buf = (hi - lo) * 0.1
-        return lo - buf, hi + buf
-
-    def _x_to_px(self, i: int, n: int, plot_rect: QRectF) -> float:
-        if n <= 1:
-            return plot_rect.left()
-        return plot_rect.left() + (i / (n - 1)) * plot_rect.width()
-
-    def _y_to_px(self, v: float, y_min: float, y_max: float, plot_rect: QRectF) -> float:
-        if y_max - y_min < 1e-9:
-            return plot_rect.center().y()
-        t = (v - y_min) / (y_max - y_min)
-        return plot_rect.bottom() - t * plot_rect.height()
 
     def _draw_grid(self, painter: QPainter, plot_rect: QRectF) -> None:
         pen = QPen(self._grid_color)
         pen.setWidthF(1.0)
         pen.setCosmetic(True)
         painter.setPen(pen)
-        rows = 4
+        rows = len(Y_TICKS) - 1
         for i in range(rows + 1):
             y = plot_rect.top() + (i / rows) * plot_rect.height()
             painter.drawLine(int(plot_rect.left()), int(y),
@@ -213,31 +222,69 @@ class TrendChartItem(QQuickPaintedItem):
         self,
         painter: QPainter,
         plot_rect: QRectF,
-        y_min: float,
+        window_start: float,
-        y_max: float,
+        window_end: float,
     ) -> None:
         painter.setPen(self._text_color)
         font = QFont(painter.font())
         font.setPointSizeF(max(7.0, font.pointSizeF() * 0.85))
         painter.setFont(font)
-        rows = 4
+
-        for i in range(rows + 1):
+        title_w = 14  # leftmost sliver reserved for the rotated "Temp" title
-            t = i / rows
+        label_w = self._margin_left - 4 - title_w  # 4px gutter before the plot area
-            y_val = y_max - t * (y_max - y_min)
+        for tick in reversed(Y_TICKS):
-            y_px = plot_rect.top() + t * plot_rect.height()
+            y_px = self._y_to_px(tick, plot_rect)
-            label = f"{y_val:.1f}"
+            painter.drawText(QRectF(title_w, y_px - 7, label_w, 14),
-            painter.drawText(QRectF(0, y_px - 7, self._padding, 14),
                              Qt.AlignmentFlag.AlignRight | Qt.AlignmentFlag.AlignVCenter,
-                             label)
+                             str(tick))
+
+        # X-axis: elapsed seconds within the current rolling window.
+        cols = 4
+        y_px = plot_rect.bottom() + 4
+        for i in range(cols + 1):
+            t_val = window_start + (i / cols) * (window_end - window_start)
+            x_px = self._x_to_px(t_val, window_start, window_end, plot_rect)
+            label = f"{t_val:.0f}"
+            if i == 0:
+                rect = QRectF(x_px, y_px, 40, 14)
+                align = Qt.AlignmentFlag.AlignLeft
+            elif i == cols:
+                # Right-anchor inside the plot so the label never clips off-widget
+                rect = QRectF(x_px - 40, y_px, 40, 14)
+                align = Qt.AlignmentFlag.AlignRight
+            else:
+                rect = QRectF(x_px - 20, y_px, 40, 14)
+                align = Qt.AlignmentFlag.AlignHCenter
+            painter.drawText(rect, align | Qt.AlignmentFlag.AlignTop, label)
+
+        self._draw_axis_titles(painter, plot_rect, title_w, y_px + 18)
+
+    def _draw_axis_titles(
+        self,
+        painter: QPainter,
+        plot_rect: QRectF,
+        title_w: float,
+        x_label_bottom: float,
+    ) -> None:
+        # Y axis: "Temp", rotated upright, centered along the plot's height.
+        painter.save()
+        painter.translate(title_w / 2, plot_rect.center().y())
+        painter.rotate(-90)
+        painter.drawText(QRectF(-plot_rect.height() / 2, -7, plot_rect.height(), 14),
+                         Qt.AlignmentFlag.AlignCenter, "Temp (°C)")
+        painter.restore()
+
+        # X axis: "Time", centered under the elapsed-seconds tick row.
+        painter.drawText(QRectF(plot_rect.left(), x_label_bottom, plot_rect.width(), 14),
+                         Qt.AlignmentFlag.AlignHCenter | Qt.AlignmentFlag.AlignTop, "Time")
 
     def _draw_line(
         self,
         painter: QPainter,
         plot_rect: QRectF,
-        y_min: float,
+        window_start: float,
-        y_max: float,
+        window_end: float,
     ) -> None:
-        n = len(self._data)
         pen = QPen(self._line_color)
         pen.setWidthF(2.0)
         pen.setCosmetic(True)
@@ -246,15 +293,16 @@ class TrendChartItem(QQuickPaintedItem):
         painter.setPen(pen)
 
         poly = QPolygon()
-        for i, v in enumerate(self._data):
+        for elapsed, value in self._points:
-            px = self._x_to_px(i, n, plot_rect)
+            px = self._x_to_px(elapsed, window_start, window_end, plot_rect)
-            py = self._y_to_px(v, y_min, y_max, plot_rect)
+            py = self._y_to_px(value, plot_rect)
             poly.append(QPoint(int(px), int(py)))
         painter.drawPolyline(poly)
 
         # Trailing dot at the last data point
-        last_x = int(self._x_to_px(n - 1, n, plot_rect))
+        last_elapsed, last_value = self._points[-1]
-        last_y = int(self._y_to_px(self._data[-1], y_min, y_max, plot_rect))
+        last_x = int(self._x_to_px(last_elapsed, window_start, window_end, plot_rect))
+        last_y = int(self._y_to_px(last_value, plot_rect))
         painter.setBrush(self._line_color)
         painter.setPen(Qt.PenStyle.NoPen)
         radius = 3

src/pygui/backend/visualization/wafer_map_item.py

@@ -14,7 +14,7 @@ import logging
 import math
 
 import numpy as np
-from PySide6.QtCore import Property, QPoint, Qt, Signal, Slot
+from PySide6.QtCore import Property, QPoint, QRectF, Qt, Signal, Slot
 from PySide6.QtGui import (
     QBrush,
     QColor,
@@ -27,11 +27,69 @@ from PySide6.QtGui import (
 from PySide6.QtQml import QmlElement
 from PySide6.QtQuick import QQuickPaintedItem
 
-from pygui.backend.visualization.rbf_heatmap import interpolate_field
+from pygui.backend.models.frame_stats import compute_stats
+from pygui.backend.visualization.rbf_heatmap import (
+    ellipse_alpha,
+    interpolate_field,
+    refine_field,
+)
 from pygui.backend.wafer.zwafer_models import Sensor
 
 log = logging.getLogger(__name__)
 
+
+def parse_thickness_csv(file_path: str) -> tuple[list[list[float]], str]:
+    """Parse a customer thickness CSV into [x, y, t2] points (mm from center).
+
+    Expected columns (C# parity): Lot Start Time, RC, Site#, Slot#, T2,
+    NGOF, Wafer X, Wafer Y. Only the first wafer (first Slot# value) is read.
+    Returns (points, error) — error is "" on success.
+    """
+    import csv
+
+    points: list[list[float]] = []
+    slot: str | None = None
+    try:
+        with open(file_path, newline="") as fh:
+            reader = csv.reader(fh)
+            header = next(reader, None)
+            if header is None:
+                return [], "Unable to read header row from CSV file."
+            if header and header[-1] == "":  # trailing comma
+                header = header[:-1]
+            nfields = len(header)
+            if nfields != 8:
+                return [], "Incorrect field count in CSV header row."
+            for lno, row in enumerate(reader, start=2):
+                if row and row[-1] == "":
+                    row = row[:-1]
+                if len(row) != nfields:
+                    return [], f"Incorrect field count in CSV row {lno}"
+                if slot is None:
+                    slot = row[3]
+                elif row[3] != slot:
+                    break
+                try:
+                    t2, x, y = float(row[4]), float(row[6]), float(row[7])
+                except ValueError:
+                    return [], f"Malformed value in CSV row {lno}"
+                points.append([x, y, t2])
+    except OSError as exc:
+        return [], f"Unable to read CSV file: {exc}"
+    if not points:
+        return [], "No data found in CSV file."
+    return points, ""
+
+
+def readout_text(values: list[float]) -> str:
+    """Full READOUT stats line for the export footer; '' when no data."""
+    if not values:
+        return ""
+    s = compute_stats(values)
+    return (f"Sensors: {len(values)}   Min: {s.min:.2f}°C (#{s.min_index + 1})   "
+            f"Max: {s.max:.2f}°C (#{s.max_index + 1})   Diff: {s.diff:.2f}   "
+            f"Avg: {s.avg:.2f}   σ: {s.sigma:.2f}   3σ: {s.three_sigma:.2f}")
+
 QML_IMPORT_NAME = "ISC.Wafer"
 QML_IMPORT_MAJOR_VERSION = 1
 
@@ -47,11 +105,14 @@ class WaferMapItem(QQuickPaintedItem):
     marginChanged   = Signal()
     blendChanged    = Signal()
     showLabelsChanged = Signal()
+    showExtremesChanged = Signal()
     colorsChanged   = Signal()
     shapeChanged    = Signal()
     sizeChanged     = Signal()
     thicknessChanged = Signal()
     showThicknessChanged = Signal()
+    hoveredIndexChanged = Signal()
+    hoverScaleChanged = Signal()
 
 
     def __init__(self, parent=None):
@@ -63,11 +124,16 @@ class WaferMapItem(QQuickPaintedItem):
         self._margin:   float = 1.0
         self._blend:    float = 0.0
         self._show_labels: bool = True
+        self._show_extremes: bool = True
         self._shape: str = "round"
         self._size: float = 300.0
-        self._thickness_data: list[float] = []
+        self._thickness_data: list[list[float]] = []  # [x_mm, y_mm, t2] triples
         self._show_thickness: bool = False
         self._thickness_heatmap:QImage | None = None
+        # Hover highlight: index of the marker under the pointer (-1 = none)
+        # and a 1.0->~1.5 grow factor driven by a QML Behavior for a smooth animation.
+        self._hovered_index: int = -1
+        self._hover_scale: float = 1.0
 
         # Dark-theme color defaults (match Theme.qml tokens)
         self._ring_color     = QColor("#2A3441")   # waferRingColor  (toneBorder)
@@ -81,6 +147,12 @@ class WaferMapItem(QQuickPaintedItem):
         self._markers: dict[int, tuple[int, int]] = {}  # sensor index → (px, py)
         self._marker_r: int = 4
         self._heatmap:  QImage | None = None
+        # Size the markers/heatmap were last computed against. On first activation
+        # (e.g. a freshly-created Loader item) width()/height() can still be 0/stale
+        # when `sensors` is first set, computing degenerate marker positions that
+        # never get retried. paint() re-checks this every frame so geometry that
+        # settles after property assignment still gets picked up.
+        self._last_draw_size: int = -1
 
         self.widthChanged.connect(self._on_resize)
         self.heightChanged.connect(self._on_resize)
@@ -91,7 +163,7 @@ class WaferMapItem(QQuickPaintedItem):
     def sensors(self) -> list:
         return [{"label": s.label, "x": s.x, "y": s.y} for s in self._sensors]
 
-    @sensors.setter
+    @sensors.setter  # type: ignore[no-redef]
     def sensors(self, val: list) -> None:
         self._sensors = [
             Sensor(
@@ -111,7 +183,7 @@ class WaferMapItem(QQuickPaintedItem):
     def values(self) -> list:
         return self._values
 
-    @values.setter
+    @values.setter  # type: ignore[no-redef]
     def values(self, val: list) -> None:
         self._values = list(val or [])
         self._rebuild_heatmap()
@@ -122,7 +194,7 @@ class WaferMapItem(QQuickPaintedItem):
     def bands(self) -> list:
         return self._bands
 
-    @bands.setter
+    @bands.setter  # type: ignore[no-redef]
     def bands(self, val: list) -> None:
         self._bands = list(val or [])
         self.bandsChanged.emit()
@@ -132,7 +204,7 @@ class WaferMapItem(QQuickPaintedItem):
     def target(self) -> float:
         return self._target
 
-    @target.setter
+    @target.setter  # type: ignore[no-redef]
     def target(self, val: float) -> None:
         self._target = float(val)
         self._rebuild_heatmap()
@@ -143,7 +215,7 @@ class WaferMapItem(QQuickPaintedItem):
     def margin(self) -> float:
         return self._margin
 
-    @margin.setter
+    @margin.setter  # type: ignore[no-redef]
     def margin(self, val: float) -> None:
         self._margin = float(val)
         self._rebuild_heatmap()
@@ -154,7 +226,7 @@ class WaferMapItem(QQuickPaintedItem):
     def blend(self) -> float:
         return self._blend
 
-    @blend.setter
+    @blend.setter  # type: ignore[no-redef]
     def blend(self, val: float) -> None:
         self._blend = max(0.0, min(1.0, float(val)))
         if self._blend > 0 and self._heatmap is None:
@@ -166,17 +238,27 @@ class WaferMapItem(QQuickPaintedItem):
     def showLabels(self) -> bool:
         return self._show_labels
 
-    @showLabels.setter
+    @showLabels.setter  # type: ignore[no-redef]
     def showLabels(self, val: bool) -> None:
         self._show_labels = bool(val)
         self.showLabelsChanged.emit()
         self.update()
 
+    @Property(bool, notify=showExtremesChanged)
+    def showExtremes(self) -> bool:
+        return self._show_extremes
+
+    @showExtremes.setter  # type: ignore[no-redef]
+    def showExtremes(self, val: bool) -> None:
+        self._show_extremes = bool(val)
+        self.showExtremesChanged.emit()
+        self.update()
+
     @Property(str, notify=shapeChanged)
     def shape(self) -> str:
         return self._shape
 
-    @shape.setter
+    @shape.setter  # type: ignore[no-redef]
     def shape(self, val: str) -> None:
         self._shape = str(val).lower()
         self._rebuild()
@@ -186,7 +268,7 @@ class WaferMapItem(QQuickPaintedItem):
     def size(self) -> float:
         return self._size
 
-    @size.setter
+    @size.setter  # type: ignore[no-redef]
     def size(self, val: float) -> None:
         self._size = float(val)
         self._rebuild()
@@ -194,54 +276,95 @@ class WaferMapItem(QQuickPaintedItem):
 
     @Property("QVariantList", notify=thicknessChanged)
     def thicknessData(self) -> list:
+        """Thickness measurement points as [x_mm, y_mm, t2] triples."""
         return self._thickness_data
 
-    @thicknessData.setter
+    @thicknessData.setter  # type: ignore[no-redef]
     def thicknessData(self, val:list) -> None:
-        self._thickness_data = list(val or [])
+        self._thickness_data = [list(p) for p in (val or [])]
         self._rebuild_thickness()
         self.thicknessChanged.emit()
+        self.update()
+
+    @Property(bool, notify=thicknessChanged)
+    def hasThickness(self) -> bool:
+        return bool(self._thickness_data)
+
+    @Slot(str, result=str)
+    def loadThickness(self, file_path: str) -> str:
+        """Load a customer thickness CSV; returns error message, '' on success."""
+        points, err = parse_thickness_csv(file_path)
+        if err:
+            return err
+        self._thickness_data = points
+        self._rebuild_thickness()
+        self.thicknessChanged.emit()
+        self.update()
+        return ""
         self.update
 
     @Property(bool, notify=showThicknessChanged)
     def showThickness(self) -> bool:
         return self._show_thickness
 
-    @showThickness.setter
+    @showThickness.setter  # type: ignore[no-redef]
     def showThickness(self, val: bool) -> None:
         self._show_thickness = bool(val)
         self.showThicknessChanged.emit()
         self.update()
 
+    @Property(int, notify=hoveredIndexChanged)
+    def hoveredIndex(self) -> int:
+        return self._hovered_index
+
+    @hoveredIndex.setter  # type: ignore[no-redef]
+    def hoveredIndex(self, val: int) -> None:
+        val = int(val)
+        if val == self._hovered_index:
+            return
+        self._hovered_index = val
+        self.hoveredIndexChanged.emit()
+        self.update()
+
+    @Property(float, notify=hoverScaleChanged)
+    def hoverScale(self) -> float:
+        return self._hover_scale
+
+    @hoverScale.setter  # type: ignore[no-redef]
+    def hoverScale(self, val: float) -> None:
+        self._hover_scale = float(val)
+        self.hoverScaleChanged.emit()
+        self.update()
+
     # Colour properties — QML can bind these to Theme tokens
     @Property(QColor, notify=colorsChanged)
     def ringColor(self) -> QColor: return self._ring_color
-    @ringColor.setter
+    @ringColor.setter  # type: ignore[no-redef]
     def ringColor(self, c: QColor) -> None: self._ring_color = c; self.update()
 
     @Property(QColor, notify=colorsChanged)
     def axisColor(self) -> QColor: return self._axis_color
-    @axisColor.setter
+    @axisColor.setter  # type: ignore[no-redef]
     def axisColor(self, c: QColor) -> None: self._axis_color = c; self.update()
 
     @Property(QColor, notify=colorsChanged)
     def lowColor(self) -> QColor: return self._low_color
-    @lowColor.setter
+    @lowColor.setter  # type: ignore[no-redef]
     def lowColor(self, c: QColor) -> None: self._low_color = c; self.update()
 
     @Property(QColor, notify=colorsChanged)
     def inRangeColor(self) -> QColor: return self._in_range_color
-    @inRangeColor.setter
+    @inRangeColor.setter  # type: ignore[no-redef]
     def inRangeColor(self, c: QColor) -> None: self._in_range_color = c; self.update()
 
     @Property(QColor, notify=colorsChanged)
     def highColor(self) -> QColor: return self._high_color
-    @highColor.setter
+    @highColor.setter  # type: ignore[no-redef]
     def highColor(self, c: QColor) -> None: self._high_color = c; self.update()
 
     @Property(QColor, notify=colorsChanged)
     def textColor(self) -> QColor: return self._text_color
-    @textColor.setter
+    @textColor.setter  # type: ignore[no-redef]
     def textColor(self, c: QColor) -> None: self._text_color = c; self.update()
 
     # ── slots ─────────────────────────────────────────────────────────────
@@ -255,70 +378,125 @@ class WaferMapItem(QQuickPaintedItem):
                 return idx
         return -1
 
+    # TODO P6.1: build batch export on top of this single-frame export
+    #   THINKING: export_image() already does the hard part (grabToImage → PNG);
+    #   batch export is just a loop over file_browser.files that loads each CSV
+    #   through the existing wafer-map pipeline and calls this per file into a
+    #   chosen output dir, plus an optional summary CSV of (file, min/max/mean).
+    #   No new rendering code needed — see docs/pending/alpha-release-polish-plan.md §6.1.
     @Slot(str, result=bool)
-    def export_image(self, file_path: str) -> bool:
+    @Slot(str, str, result=bool)
+    def export_image(self, file_path: str, extra: str = "") -> bool:
         """Export the current wafer map rendering to a PNG file
 
         Args:
-            file_pat: Absolute path for the output PNG.
+            file_path: Absolute path for the output PNG.
+            extra: Optional second footer line (live stream metrics).
 
         Returns:
         True on success, False on failure
         """
-        if not file_path:
+        if not file_path or not self._values:
+            # No file loaded / no stream played yet — only the empty template
+            # would render, which isn't a meaningful export.
             return False
         try:
-            result = self.grabToImage()
+            # Render synchronously via paint() into our own image —
-            img = result.image()
+            # grabToImage() resolves on a later render frame, so its result
-            img.save(file_path, "PNG")
+            # is null when read immediately (the old silent failure).
-            return True
+            w, h = int(self.width()), int(self.height())
+            if w <= 0 or h <= 0:
+                return False
+            lines = [ln for ln in (readout_text(self._values), extra) if ln]
+            footer_h = 28 * len(lines)
+            img = QImage(w, h + footer_h, QImage.Format.Format_ARGB32)
+            img.fill(0)  # transparent background
+            painter = QPainter(img)
+            self.paint(painter)
+            if lines:
+                painter.fillRect(QRectF(0, h, w, footer_h), QColor("#101014"))
+                painter.setPen(QColor("#CBD5E1"))
+                for i, line in enumerate(lines):
+                    painter.drawText(QRectF(0, h + 28 * i, w, 28),
+                                     Qt.AlignmentFlag.AlignCenter, line)
+            painter.end()
+            return bool(img.save(file_path))
         except Exception as e:
             log.error("Export failed: %s", e)
             return False
 
+
     # ── internal ─────────────────────────────────────────────────────────
 
+    def _paint_extremes(self, painter: QPainter) -> None:
+        """Ring the hottest (high color) and coldest (low color) markers."""
+        if not self._show_extremes or not self._values or not self._markers:
+            return
+        s = compute_stats(self._values)
+        ring_r = self._marker_r + 5
+        painter.setBrush(Qt.BrushStyle.NoBrush)
+        for idx, color in ((s.max_index, self._high_color),
+                           (s.min_index, self._low_color)):
+            if idx not in self._markers:
+                continue
+            px, py = self._markers[idx]
+            painter.setPen(QPen(color, 2))
+            painter.drawEllipse(px - ring_r, py - ring_r, 2 * ring_r, 2 * ring_r)
+
     def _rebuild_thickness(self) -> None:
-        """Interpolate thickness data into a gray/orange heatmap QImage."""
+        """Interpolate thickness points into a gray/orange heatmap QImage."""
-        if not self._sensors or not self._thickness_data:
+        if not self._thickness_data:
             self._thickness_heatmap = None
             return
         ds = self._draw_size()
         r_mm = self._wafer_radius_mm()
-        xs = np.array([s.x for s in self._sensors])
+        pts = np.array(self._thickness_data, dtype=float)
-        ys = np.array([s.y for s in self._sensors])
+        xs, ys, vs = pts[:, 0], pts[:, 1], pts[:, 2]
-        vs = np.array(self._thickness_data[:len(self._sensors)], dtype=float)
-        if len(vs) < len(self._sensors):
-            self._thickness_heatmap = None
-            return
         try:
+            # No round_clip — see _rebuild_heatmap for why the mask is analytic.
             field = interpolate_field(
                 xs, ys, vs,
                 width=ds, height=ds,
                 extent=(-r_mm, r_mm, -r_mm, r_mm),
-                round_clip=(self._shape == "round"),
             )
         except Exception:
             self._thickness_heatmap = None
             return
-        # Gray/orange colormap: map field range 0→1 to gray→orange
+        field = refine_field(field)
-        vmin, vmax = np.nanmin(field), np.nanmax(field)
+        # ponytail: RBF overshoots around outlier sensors, inventing values no
+        # sensor produced (e.g. negative diffs when all diffs are positive).
+        # Clamp to the real data range so color only reflects measured values.
+        field = np.clip(field, vs.min(), vs.max())
+        if self._shape == "round":
+            alpha = ellipse_alpha(*field.shape)
+        else:
+            alpha = np.ones(field.shape)
+        # Color-range bounds from inside the wafer only — the unclipped field
+        # extrapolates wildly toward the square corners, which alpha hides but
+        # a corner-driven vmin/vmax would flatten the visible gradient.
+        inside = field[alpha >= 0.5]
+        vmin, vmax = inside.min(), inside.max()
         span = vmax - vmin or 1.0
+        # Gray/orange colormap: map field range 0→1 to gray→orange
         t = np.clip((field - vmin) / span, 0.0, 1.0)
 
+        gh, gw = field.shape
         # Gray (0.5, 0.5, 0.5) → orange (1.0, 0.65, 0.0)
-        rgb = np.zeros((ds, ds, 3), dtype=np.float32)
+        rgb = np.zeros((gh, gw, 3), dtype=np.float32)
         rgb[:, :, 0] = 0.5 + 0.5 * t
         rgb[:, :, 1] = 0.5 + 0.15 * t
         rgb[:, :, 2] = 0.5 - 0.5 * t
 
         rgb = np.nan_to_num(rgb, nan=0.0)
-        rgba = np.zeros((ds, ds, 4), dtype=np.uint8)
+        rgba = np.zeros((gh, gw, 4), dtype=np.uint8)
         rgba[:, :, :3] = (rgb * 255).astype(np.uint8)
-        rgba[:, :, 3] = np.where(np.isfinite(field), 180, 0).astype(np.uint8)
+        rgba[:, :, 3] = (alpha * 180).astype(np.uint8)
 
-        self._thickness_heatmap = (
+        grid_img = QImage(rgba.tobytes(), gw, gh, QImage.Format.Format_RGBA8888).copy()
-            QImage(rgba.tobytes(), ds, ds, QImage.Format.Format_RGBA8888).copy()
+        self._thickness_heatmap = grid_img.scaled(
+            ds, ds,
+            Qt.AspectRatioMode.IgnoreAspectRatio,
+            Qt.TransformationMode.SmoothTransformation,
         )
 
     def _on_resize(self) -> None:
@@ -342,6 +520,13 @@ class WaferMapItem(QQuickPaintedItem):
         r = max(math.hypot(s.x, s.y) for s in self._sensors)
         return r * 1.05
 
+    # TODO P6.2: reuse this for the edge-to-center delta metric
+    #   THINKING: radial_metrics.py (new) needs the same "which sensors are near
+    #   the edge vs. near the center" bucketing this function already computes
+    #   for ring-line drawing — do NOT re-derive ring boundaries separately, this
+    #   already handles round vs. square wafer shapes correctly (see family_spec.py
+    #   square-wafer work). Outermost group ≈ edge sensors, innermost ≈ center.
+    #   See docs/pending/alpha-release-polish-plan.md §6.2.
     def _sensor_ring_radii_mm(self) -> list[float]:
         """Distinct radial distances of sensor groups, sorted ascending, plus the outer boundary."""
         if not self._sensors:
@@ -391,19 +576,34 @@ class WaferMapItem(QQuickPaintedItem):
             self._heatmap = None
             return
         try:
+            # No round_clip: refine the smooth unclipped field, then mask with an
+            # analytic anti-aliased ellipse (a coarse-grid clip mask upscales jagged).
             field = interpolate_field(
                 xs, ys, vs,
                 width=ds, height=ds,
                 extent=(-r_mm, r_mm, -r_mm, r_mm),
-                round_clip=(self._shape == "round"),
             )
         except Exception:
             self._heatmap = None
             return
-        self._heatmap = self._field_to_qimage(field, ds)
+        field = refine_field(field)
+        # ponytail: RBF overshoots around outlier sensors, inventing values no
+        # sensor produced (e.g. negative diffs when all diffs are positive).
+        # Clamp to the real data range so color only reflects measured values.
+        field = np.clip(field, vs.min(), vs.max())
+        if self._shape == "round":
+            alpha = ellipse_alpha(*field.shape)
+        else:
+            alpha = np.ones(field.shape)
+        grid_img = self._field_to_qimage(field, alpha)
+        self._heatmap = grid_img.scaled(
+            ds, ds,
+            Qt.AspectRatioMode.IgnoreAspectRatio,
+            Qt.TransformationMode.SmoothTransformation,
+        )
 
-    def _field_to_qimage(self, field: np.ndarray, ds: int) -> QImage:
+    def _field_to_qimage(self, field: np.ndarray, alpha: np.ndarray) -> QImage:
-        """Apply a band-aware tri-color gradient → RGBA QImage."""
+        """Apply a band-aware tri-color gradient → RGBA QImage at the field's own resolution."""
         lo_b = self._target - self._margin
         hi_b = self._target + self._margin
         span = hi_b - lo_b or 1.0
@@ -428,19 +628,28 @@ class WaferMapItem(QQuickPaintedItem):
             lo_c * (1 - t_lo) + mid_c * t_lo,
             mid_c * (1 - t_hi) + hi_c * t_hi,
         )
-        # Outside the wafer circle `field` is NaN → NaN propagates into rgb. Alpha
-        # masks those pixels anyway, but zero them so the uint8 cast is well-defined.
         rgb = np.nan_to_num(rgb, nan=0.0)
-        rgba = np.zeros((ds, ds, 4), dtype=np.uint8)
+        gh, gw = field.shape
+        rgba = np.zeros((gh, gw, 4), dtype=np.uint8)
         rgba[:, :, :3] = (rgb * 255).astype(np.uint8)
-        rgba[:, :, 3]  = np.where(np.isfinite(field), 210, 0).astype(np.uint8)
+        # alpha is a continuous 0..1 coverage mask (not a hard isfinite cutoff) so the
+        # round-clip boundary anti-aliases instead of showing coarse-grid steps.
+        rgba[:, :, 3]  = (alpha * 210).astype(np.uint8)
 
-        return QImage(rgba.tobytes(), ds, ds, QImage.Format.Format_RGBA8888).copy()
+        return QImage(rgba.tobytes(), gw, gh, QImage.Format.Format_RGBA8888).copy()
 
     # ── paint ─────────────────────────────────────────────────────────────
 
     def paint(self, painter: QPainter) -> None:
         ds = self._draw_size()
+        if ds != self._last_draw_size:
+            # Geometry settled (or changed) since markers/heatmap were last built
+            # against a stale size — recompute now, at actual paint time.
+            self._last_draw_size = ds
+            self._compute_markers()
+            self._rebuild_heatmap()
+            self._rebuild_thickness()
+
         r_px = int(ds / 2 - 4)
         cx, cy = self._center()
 
@@ -461,6 +670,7 @@ class WaferMapItem(QQuickPaintedItem):
             painter.setOpacity(1.0)
 
         self._paint_markers(painter)
+        self._paint_extremes(painter)
 
     def _paint_template(self, painter: QPainter, cx: int, cy: int, r_px: int) -> None:
         ds = self._draw_size()
@@ -524,11 +734,11 @@ class WaferMapItem(QQuickPaintedItem):
             font_scale = 0.85
 
         id_font = QFont()
-        id_font.setPointSize(max(4, int(r * font_scale)))
+        id_font.setPointSize(max(9, int(r * font_scale)))
         id_font.setBold(True)
 
         temp_font = QFont()
-        temp_font.setPointSize(max(3, int((r - 1) * font_scale)))
+        temp_font.setPointSize(max(9, int(r * font_scale)))
 
         band_color = {
             "in_range": self._in_range_color,
@@ -536,28 +746,6 @@ class WaferMapItem(QQuickPaintedItem):
             "low":      self._low_color,
         }
 
-        for i, s in enumerate(self._sensors):
-            if i not in self._markers:
-                continue
-            px, py = self._markers[i]
-            color = band_color.get(
-                self._bands[i] if i < len(self._bands) else "in_range",
-                self._in_range_color,
-            )
-            # Filled circle with thin dark outline for contrast over heatmap
-            painter.setPen(QPen(QColor(0, 0, 0, 100), 1))
-            painter.setBrush(QBrush(color))
-            painter.drawEllipse(px - r, py - r, 2 * r, 2 * r)
-
-            if self._show_labels:
-                has_temp = i < len(self._values)
-
-                # Fetch text alignment side and offsets
-                side = getattr(s, "side", "right").lower()
-                ox = getattr(s, "offset_x", 0.0) * r
-                oy = getattr(s, "offset_y", 0.0) * r
-
-                # Pre-compute metrics using current scaled fonts
         painter.setFont(id_font)
         id_fm = painter.fontMetrics()
         id_line_h = id_fm.height()
@@ -568,6 +756,39 @@ class WaferMapItem(QQuickPaintedItem):
         temp_line_h = temp_fm.height()
         temp_ascent = temp_fm.ascent()
 
+        for i, s in enumerate(self._sensors):
+            if i not in self._markers:
+                continue
+            px, py = self._markers[i]
+            color = band_color.get(
+                self._bands[i] if i < len(self._bands) else "in_range",
+                self._in_range_color,
+            )
+            is_hovered = i == self._hovered_index
+            marker_r = int(round(r * self._hover_scale)) if is_hovered else r
+
+            if is_hovered:
+                # Soft glow ring behind the marker, growing with hoverScale.
+                glow_r = int(round(marker_r * 1.9))
+                glow_color = QColor(color)
+                glow_color.setAlpha(70)
+                painter.setPen(Qt.PenStyle.NoPen)
+                painter.setBrush(QBrush(glow_color))
+                painter.drawEllipse(px - glow_r, py - glow_r, 2 * glow_r, 2 * glow_r)
+
+            # Filled circle with thin dark outline for contrast over heatmap
+            painter.setPen(QPen(QColor(0, 0, 0, 100), 1))
+            painter.setBrush(QBrush(color))
+            painter.drawEllipse(px - marker_r, py - marker_r, 2 * marker_r, 2 * marker_r)
+
+            if self._show_labels:
+                has_temp = i < len(self._values)
+
+                # Fetch text alignment side and offsets
+                side = getattr(s, "side", "right").lower()
+                ox = getattr(s, "offset_x", 0.0) * r
+                oy = getattr(s, "offset_y", 0.0) * r
+
                 id_text = s.label
                 temp_text = f"{self._values[i]:.2f}" if has_temp else ""
 
@@ -598,11 +819,11 @@ class WaferMapItem(QQuickPaintedItem):
                 painter.setPen(QPen(self._text_color))
                 y1 = ly + id_ascent
                 if side in ("top", "bottom"):
-                    painter.drawText(lx + (text_w - id_w) // 2, y1, id_text)
+                    painter.drawText(lx + (text_w - id_w) // 2, y1, id_text)  # type: ignore[arg-type]
                 elif side == "left":
-                    painter.drawText(lx + (text_w - id_w), y1, id_text)
+                    painter.drawText(lx + (text_w - id_w), y1, id_text)  # type: ignore[arg-type]
                 else:
-                    painter.drawText(lx, y1, id_text)
+                    painter.drawText(lx, y1, id_text)  # type: ignore[arg-type]
 
                 # Draw Temperature (second line)
                 if has_temp:
@@ -610,8 +831,8 @@ class WaferMapItem(QQuickPaintedItem):
                     painter.setPen(QPen(color))
                     y2 = ly + id_line_h + temp_ascent
                     if side in ("top", "bottom"):
-                        painter.drawText(lx + (text_w - temp_w) // 2, y2, temp_text)
+                        painter.drawText(lx + (text_w - temp_w) // 2, y2, temp_text)  # type: ignore[arg-type]
                     elif side == "left":
-                        painter.drawText(lx + (text_w - temp_w), y2, temp_text)
+                        painter.drawText(lx + (text_w - temp_w), y2, temp_text)  # type: ignore[arg-type]
                     else:
-                        painter.drawText(lx, y2, temp_text)
+                        painter.drawText(lx, y2, temp_text)  # type: ignore[arg-type]

src/pygui/backend/wafer/__init__.py

@@ -1,10 +0,0 @@
-# ===== Wafer Sub-package =====
-from pygui.backend.wafer.wafer_layouts import available_families, load_layout
-from pygui.backend.wafer.zwafer_models import DataRecord, Sensor, ZWaferData
-from pygui.backend.wafer.zwafer_parser import ZWaferParser
-
-__all__ = [
-    "ZWaferData", "Sensor", "DataRecord",
-    "ZWaferParser",
-    "load_layout", "available_families",
-]

src/pygui/backend/wafer/family_spec.py

@@ -0,0 +1,9 @@
+"""Single source of truth for the wafer sensor-count partition."""
+
+
+def sensor_count_for(family_code: str) -> int:
+    """Return the number of valid sensor readings for a wafer family code.
+
+    Returns 80 for the "X" family. Returns 244 for every other family
+    code."""
+    return 80 if family_code == "X" else 244

src/pygui/backend/wafer/wafer_layouts.py

@@ -66,9 +66,39 @@ def _family_name(raw_name: str) -> str:
 
 def _load_yaml(path: Path) -> dict:
     with path.open(encoding="utf-8") as f:
-        return yaml.safe_load(f)
+        loaded: dict = yaml.safe_load(f)
+        return loaded
 
 
+# Edge→center sensor pair tables, ported verbatim from the C# original
+# (Form1.cs ec_map_*). Indices are 0-origin. Domain data, not derivable from
+# ring geometry — see docs/adr/0002-edge-center-pair-tables.md.
+_EC_MAPS: dict[str, tuple[tuple[int, int], ...]] = {
+    "AEP": tuple((e, 40 + e // 2) for e in range(16)),
+    "BCD": tuple((e, 28) for e in range(12)),
+    "F": ((0, 18), (1, 19), (2, 19), (3, 19), (4, 20), (5, 20),
+          (6, 20), (7, 21), (8, 21), (9, 21), (10, 18), (11, 18)),
+    "X": ((5, 76), (0, 76), (39, 76), (6, 77), (11, 77), (16, 77),
+          (17, 78), (22, 78), (27, 78), (28, 79), (33, 79), (38, 79)),
+    "Z": tuple((e, 0) for e in range(49, 65)),
+}
+
+
+def ec_pairs_for_wafer_id(wafer_id: str) -> tuple[tuple[int, int], ...]:
+    """Edge-center pairs for a wafer id's family letter; empty if unknown.
+
+    Unknown families deliberately get no pairs (C# fell through to Z).
+    """
+    prefix = wafer_id[0].upper() if wafer_id else ""
+    for families, key in (("AEP", "AEP"), ("BCD", "BCD"), ("F", "F"),
+                          ("X", "X"), ("Z", "Z")):
+        if prefix and prefix in families:
+            return _EC_MAPS[key]
+    return ()
+
+
+# P6.3 (LayoutSelector) dropped 2026-07-10 — the C# "layout" buttons only
+# exported coordinate spreadsheets, decided obsolete. See MIGRATION.md.
 def available_families() -> list[str]:
     return [_family_name(_load_yaml(p)["name"]) for p in _LAYOUTS_DIR.glob("*.yaml")]
 

src/pygui/backend/wafer/zwafer_parser.py

@@ -104,9 +104,6 @@ class ZWaferParser:
             elif key.lower() == "wafer id":
                 wafer_data.serial = value
 
-        if found_kv and wafer_data.date == datetime.min:
-            wafer_data.date = datetime.min
-
         return found_kv
 
     # ===== Sensor Layout Parsing =====
@@ -118,7 +115,7 @@ class ZWaferParser:
         y_coords: Optional[list],
     ) -> None:
         """Build sensor list from layout arrays."""
-        if not all([labels, x_coords, y_coords]):
+        if not (labels and x_coords and y_coords):
             raise ValueError("Sensor layout section is incomplete or missing.")
 
         if len(labels) != len(x_coords) or len(labels) != len(y_coords):