Add layout files for various wafers: aepwafer, bcdwafer, fwafer, xwafer, zwafer, and zwafer_rev

2026-06-08 15:10:13 -07:00
parent 9cd3170e8a
commit 59528eb6c9
6 changed files with 341 additions and 0 deletions
@@ -0,0 +1,68 @@
+# This will be the name of the output files
+name: zwafer
+wafers: ["Z"]
+
+# round or square wafer
+shape: round
+
+# diameter/size of the wafer
+size: 300
+
+# large or small markers and labels
+marker_size: small
+font_size: small
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top probably also needs
+# reverse_x/reverse_y to be set as well.
+x_origin: center
+y_origin: center
+
+# sensor X and Y values, in mm relative to the wafer center
+X: [0.00, -1.17, 8.92, 1.17, -8.92, 22.52, 29.35, -22.52, -29.35, 45.05, 73.37,
+     58.71, 9.66, -45.05, -73.37, -58.71, -9.66, 79.85, 89.06, 46.10, -23.86,
+     -79.85, -89.06, -46.10, 23.86, 66.96, 109.06, 87.27, 14.36, -66.96,
+     -109.06, -87.27, -14.36, 121.24, 135.23, 70.00, -36.23, -121.24, -135.23,
+     -70.00, 36.23, 124.71, 139.09, 72.00, -37.27, -124.71, -139.09, -72.00,
+     37.27, 89.49, 127.31, 145.74, 141.99, 116.62, 73.50, 19.19, -38.05, -89.49,
+     -127.31, -145.74, -141.99, -116.62, -73.50, -19.19, 38.05]
+Y: [0.00, -8.92, -1.17, 8.92, 1.17, -29.35, 22.52, 29.35, -22.52, -58.71,
+     -9.66, 45.05, 73.37, 58.71, 9.66, -45.05, -73.37, -46.10, 23.86, 79.85,
+     89.06, 46.10, -23.86, -79.85, -89.06, -87.27, -14.36, 66.96, 109.06, 87.27,
+     14.36, -66.96, -109.06, -70.00, 36.23, 121.24, 135.23, 70.00, -36.23,
+     -121.24, -135.23, -72.00, 37.27, 124.71, 139.09, 72.00, -37.27, -124.71,
+     -139.09, -116.62, -73.50, -19.19, 38.05, 89.49, 127.31, 145.74, 141.99,
+     116.62, 73.50, 19.19, -38.05, -89.49, -127.31, -145.74, -141.99]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 0
+
+# If one or both axes are reversed, this can be used to fix it
+# without having to edit all of the coordinates.
+# These should be false for most normal wafers.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    33: { left: [0, 0] },
+    34: { left: [0, 0] },
+    41: { top: [0, 0] },
+    42: { bottom: [0, 0] },
+    45: { top: [1, 0] },
+    46: { bottom: [0.5, 0] },
+    49: { left: [0, 0] },
+    50: { bottom: [-1.75, -0.5] },
+    51: { top: [-1, 0] },
+    52: { top: [-1, 0] },
+    53: { bottom: [0, 0] },
+    54: { left: [0, -0.75] },
+    55: { right: [0, 0.5] },
+    58: { bottom: [-0.75, 0] },
+    60: { top: [0, 0] },
+    62: { right: [0, 1] },
+    63: { right: [0, 0] },
+    64: { left: [0, 0.25] }
+}