diff --git a/assets/layouts/aepwafer.yaml b/assets/layouts/aepwafer.yaml
new file mode 100644
index 0000000..61d4c29
--- /dev/null
+++ b/assets/layouts/aepwafer.yaml
@@ -0,0 +1,44 @@
+# This will be the name of the output files
+name: aepwafer
+wafers: ["A", "E", "P"]
+
+# round or square wafer
+shape: round
+
+# diameter/edge size of the wafer
+size: 300
+
+# large or small markers and labels
+marker_size: large
+font_size: large
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top implies that the X/Y values
+# for that axis are negative, or else we'll be drawing outside the image.
+x_origin: left
+y_origin: bottom
+
+# sensor X and Y values, in mm relative to the origin
+X: [150, 204, 249, 280, 290, 280, 249, 204, 150, 97, 51, 21, 10, 21, 51, 97,
+    150, 203, 241, 255, 241, 203, 150, 98, 59, 45, 59, 98, 171, 207, 228, 228,
+    207, 171, 130, 94, 73, 73, 94, 130, 150, 186, 200, 186, 150, 115, 100, 115]
+Y: [290, 280, 249, 204, 150, 97, 51, 21, 10, 21, 51, 97, 150, 204, 249, 280,
+    255, 241, 203, 150, 98, 59, 45, 59, 98, 150, 203, 241, 228, 207, 171, 130,
+    94, 73, 73, 94, 130, 171, 207, 228, 200, 186, 150, 115, 100, 115, 150, 186]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 1
+
+# Normally, positive X is to the right, and positive Y is up.
+# These settings can be used to reverse one or both of these.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    4: { top: [0, 0] },
+    5: { top: [0, 0] },
+    6: { top: [0, 0] },
+}
diff --git a/assets/layouts/bcdwafer.yaml b/assets/layouts/bcdwafer.yaml
new file mode 100644
index 0000000..6874995
--- /dev/null
+++ b/assets/layouts/bcdwafer.yaml
@@ -0,0 +1,46 @@
+# This will be the name of the output files
+name: bcdwafer
+wafers: ["B", "C", "D"]
+
+# round or square wafer
+shape: round
+
+# diameter/edge size of the wafer
+size: 300
+
+# large or small markers and labels
+marker_size: large
+font_size: large
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top implies that the X/Y values
+# for that axis are negative, or else we'll be drawing outside the image.
+x_origin: center
+y_origin: center
+
+# sensor X and Y values, in mm relative to the origin
+X: [0, 72.50, 125.57, 145.00, 125.57, 72.50, 0, -72.50, -125.57, -145.00,
+    -125.57, -72.50, 0, 47.50, 82.27, 95.00, 82.27, 47.50, 0, -47.50, -82.27,
+    -95.00, -82.27, -47.50, 38.97, 22.50, -38.97, -22.50, 0]
+Y: [145.00, 125.57, 72.50, 0, -72.50, -125.57, -145.00, -125.57, -72.50, 0,
+    72.50, 125.57, 95.00, 82.27, 47.50, 0, -47.50, -82.27, -95.00, -82.27,
+    -47.50, 0, 47.50, 82.27, 22.50, -38.97, -22.50, 38.97, 0]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 1
+
+# Normally, positive X is to the right, and positive Y is up.
+# These settings can be used to reverse one or both of these.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    2: { left: [1, 0] },
+    3: { left: [1, 0] },
+    4: { left: [1, 0] },
+    5: { left: [1, 0] },
+    6: { left: [1, 0] },
+}
diff --git a/assets/layouts/fwafer.yaml b/assets/layouts/fwafer.yaml
new file mode 100644
index 0000000..c3770cc
--- /dev/null
+++ b/assets/layouts/fwafer.yaml
@@ -0,0 +1,43 @@
+# This will be the name of the output files
+name: fwafer
+wafers: ["F"]
+
+# round or square wafer
+shape: round
+
+# diameter/edge size of the wafer
+size: 200
+
+# large or small markers and labels
+marker_size: large
+font_size: large
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top implies that the X/Y values
+# for that axis are negative, or else we'll be drawing outside the image.
+x_origin: center
+y_origin: center
+
+# sensor X and Y values, in mm relative to the origin
+X: [0.0, 47.5, 82.3, 95.0, 82.3, 47.5, 0.0, -47.5, -82.3, -95.0, -82.3, -47.5,
+    -55.0, -14.8, 39.7, 55.0, 14.8, -39.7, -14.7, 25.5, 14.7, -25.5]
+Y: [95.0, 82.3, 47.5, 0.0, -47.5, -82.3, -95.0, -82.3, -47.5, 0.0, 47.5, 82.3,
+    13.3, 54.4, 40.0, -13.3, -54.4, -40.0, 25.5, 14.7, -25.5, -14.7]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 1
+
+# Normally, positive X is to the right, and positive Y is up.
+# These settings can be used to reverse one or both of these.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    2: { left: [1, 0] },
+    3: { left: [1, 0] },
+    4: { left: [1, 0] },
+    5: { left: [1, 0] },
+}
diff --git a/assets/layouts/xwafer.yaml b/assets/layouts/xwafer.yaml
new file mode 100644
index 0000000..5097ee7
--- /dev/null
+++ b/assets/layouts/xwafer.yaml
@@ -0,0 +1,69 @@
+# This will be the name of the output files
+name: xwafer
+wafers: ["X"]
+
+# round or square wafer
+shape: square
+
+# diameter/edge size of the wafer
+size: 310
+
+# large or small markers and labels
+marker_size: small
+font_size: small
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top implies that the X/Y values
+# for that axis are negative, or else we'll be drawing outside the image.
+x_origin: left
+y_origin: bottom
+
+# sensor X and Y values, in mm relative to the origin
+X: [ 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00,
+    13.00, 23.00, 46.43, 89.86, 133.29, 176.72, 220.15, 263.58, 287.01, 297.01,
+    307.01, 307.01, 307.01, 307.01, 307.01, 307.01, 307.01, 307.01, 307.01,
+    307.01, 307.01, 307.01, 297.01, 287.01, 263.58, 220.15, 176.72, 133.29,
+    89.86, 46.43, 23.00, 13.00, 46.43, 46.43, 46.43, 46.43, 46.43, 46.43,
+    89.86, 133.29, 176.72, 220.15, 263.58, 263.58, 263.58, 263.58, 263.58,
+    263.58, 220.15, 176.72, 133.29, 89.86, 89.86, 89.86, 89.86, 89.86,
+    133.29, 176.72, 220.15, 220.15, 220.15, 220.15, 176.72, 133.29, 133.29,
+    133.29, 176.72, 176.72]
+Y: [ 3.00, 13.07, 23.07, 46.50, 89.93, 133.36, 176.79, 220.22, 263.65, 287.08,
+    297.08, 307.08, 307.08, 307.08, 307.08, 307.08, 307.08, 307.08, 307.08,
+    307.08, 307.08, 307.08, 307.08, 297.08, 287.08, 263.65, 220.22, 176.79,
+    133.36, 89.93, 46.50, 23.07, 13.07, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00,
+    3.00, 3.00, 3.00, 3.00, 3.00, 46.50, 89.93, 133.36, 176.79, 220.22, 263.65,
+    263.65, 263.65, 263.65, 263.65, 263.65, 220.22, 176.79, 133.36, 89.93,
+    46.50, 46.50, 46.50, 46.50, 46.50, 89.93, 133.36, 176.79, 220.22, 220.22,
+    220.22, 220.22, 176.79, 133.36, 89.93, 89.93, 89.93, 133.36, 176.79,
+    176.79, 133.36 ]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 1
+
+# Normally, positive X is to the right, and positive Y is up.
+# These settings can be used to reverse one or both of these.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    21: { left: [0, 0] },
+    22: { left: [0, 0] },
+    23: { left: [0, 0] },
+    24: { left: [0, 0] },
+    25: { left: [0, 0] },
+    26: { left: [0, 0] },
+    27: { left: [0, 0] },
+    28: { left: [0, 0] },
+    29: { left: [0, 0] },
+    30: { left: [0, 0] },
+    31: { left: [0, 0] },
+    32: { left: [0, 0] },
+    33: { left: [0, 0] },
+    34: { left: [0, 0] },
+    35: { left: [0, 0] },
+    36: { left: [0, 0] }
+}
diff --git a/assets/layouts/zwafer.yaml b/assets/layouts/zwafer.yaml
new file mode 100644
index 0000000..3814b74
--- /dev/null
+++ b/assets/layouts/zwafer.yaml
@@ -0,0 +1,68 @@
+# This will be the name of the output files
+name: zwafer
+wafers: ["Z"]
+
+# round or square wafer
+shape: round
+
+# diameter/size of the wafer
+size: 300
+
+# large or small markers and labels
+marker_size: small
+font_size: small
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top probably also needs
+# reverse_x/reverse_y to be set as well.
+x_origin: center
+y_origin: center
+
+# sensor X and Y values, in mm relative to the wafer center
+X: [0.00, -1.17, 8.92, 1.17, -8.92, 22.52, 29.35, -22.52, -29.35, 45.05, 73.37,
+     58.71, 9.66, -45.05, -73.37, -58.71, -9.66, 79.85, 89.06, 46.10, -23.86,
+     -79.85, -89.06, -46.10, 23.86, 66.96, 109.06, 87.27, 14.36, -66.96,
+     -109.06, -87.27, -14.36, 121.24, 135.23, 70.00, -36.23, -121.24, -135.23,
+     -70.00, 36.23, 124.71, 139.09, 72.00, -37.27, -124.71, -139.09, -72.00,
+     37.27, 89.49, 127.31, 145.74, 141.99, 116.62, 73.50, 19.19, -38.05, -89.49,
+     -127.31, -145.74, -141.99, -116.62, -73.50, -19.19, 38.05]
+Y: [0.00, -8.92, -1.17, 8.92, 1.17, -29.35, 22.52, 29.35, -22.52, -58.71,
+     -9.66, 45.05, 73.37, 58.71, 9.66, -45.05, -73.37, -46.10, 23.86, 79.85,
+     89.06, 46.10, -23.86, -79.85, -89.06, -87.27, -14.36, 66.96, 109.06, 87.27,
+     14.36, -66.96, -109.06, -70.00, 36.23, 121.24, 135.23, 70.00, -36.23,
+     -121.24, -135.23, -72.00, 37.27, 124.71, 139.09, 72.00, -37.27, -124.71,
+     -139.09, -116.62, -73.50, -19.19, 38.05, 89.49, 127.31, 145.74, 141.99,
+     116.62, 73.50, 19.19, -38.05, -89.49, -127.31, -145.74, -141.99]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 0
+
+# If one or both axes are reversed, this can be used to fix it
+# without having to edit all of the coordinates.
+# These should be false for most normal wafers.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    33: { left: [0, 0] },
+    34: { left: [0, 0] },
+    41: { top: [0, 0] },
+    42: { bottom: [0, 0] },
+    45: { top: [1, 0] },
+    46: { bottom: [0.5, 0] },
+    49: { left: [0, 0] },
+    50: { bottom: [-1.75, -0.5] },
+    51: { top: [-1, 0] },
+    52: { top: [-1, 0] },
+    53: { bottom: [0, 0] },
+    54: { left: [0, -0.75] },
+    55: { right: [0, 0.5] },
+    58: { bottom: [-0.75, 0] },
+    60: { top: [0, 0] },
+    62: { right: [0, 1] },
+    63: { right: [0, 0] },
+    64: { left: [0, 0.25] }
+}
diff --git a/assets/layouts/zwafer_rev.yaml b/assets/layouts/zwafer_rev.yaml
new file mode 100644
index 0000000..4fc2586
--- /dev/null
+++ b/assets/layouts/zwafer_rev.yaml
@@ -0,0 +1,71 @@
+# This will be the name of the output files
+name: zwafer_rev
+wafers: []     # the reversed version doesn't represent any real wafer
+
+# round or square wafer
+shape: round
+
+# diameter/size of the wafer
+size: 300
+
+# large or small markers and labels
+marker_size: small
+font_size: small
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top probably also needs
+# reverse_x/reverse_y to be set as well.
+x_origin: center
+y_origin: center
+
+# sensor X and Y values, in mm relative to the wafer center
+X: [0.00, -1.17, 8.92, 1.17, -8.92, 22.52, 29.35, -22.52, -29.35, 45.05, 73.37,
+     58.71, 9.66, -45.05, -73.37, -58.71, -9.66, 79.85, 89.06, 46.10, -23.86,
+     -79.85, -89.06, -46.10, 23.86, 66.96, 109.06, 87.27, 14.36, -66.96,
+     -109.06, -87.27, -14.36, 121.24, 135.23, 70.00, -36.23, -121.24, -135.23,
+     -70.00, 36.23, 124.71, 139.09, 72.00, -37.27, -124.71, -139.09, -72.00,
+     37.27, 89.49, 127.31, 145.74, 141.99, 116.62, 73.50, 19.19, -38.05, -89.49,
+     -127.31, -145.74, -141.99, -116.62, -73.50, -19.19, 38.05]
+Y: [0.00, -8.92, -1.17, 8.92, 1.17, -29.35, 22.52, 29.35, -22.52, -58.71,
+     -9.66, 45.05, 73.37, 58.71, 9.66, -45.05, -73.37, -46.10, 23.86, 79.85,
+     89.06, 46.10, -23.86, -79.85, -89.06, -87.27, -14.36, 66.96, 109.06, 87.27,
+     14.36, -66.96, -109.06, -70.00, 36.23, 121.24, 135.23, 70.00, -36.23,
+     -121.24, -135.23, -72.00, 37.27, 124.71, 139.09, 72.00, -37.27, -124.71,
+     -139.09, -116.62, -73.50, -19.19, 38.05, 89.49, 127.31, 145.74, 141.99,
+     116.62, 73.50, 19.19, -38.05, -89.49, -127.31, -145.74, -141.99]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 0
+
+# If one or both axes are reversed, this can be used to fix it
+# without having to edit all of the coordinates.
+# These should be false for most normal wafers.
+reverse_x: true
+reverse_y: true
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    37: { left: [0, 0] },
+    38: { left: [0, 0] },
+    39: { left: [0, 0] },
+    41: { top: [1.5, 0] },
+    42: { bottom: [1, 0] },
+    43: { left: [0, -1] },
+    45: { bottom: [-1, -1] },
+    46: { bottom: [0, -1] },
+    47: { right: [0, 1] },
+    48: { left: [0, 0] },
+    50: { bottom: [-1, 0] },
+    52: { top: [0, 0] },
+    54: { right: [0.5, 1] },
+    56: { left: [0, 0.5] },
+    57: { left: [0, 0] },
+    58: { top: [0.5, 0] },
+    59: { left: [0, 0] },
+    60: { top: [-1, 0] },
+    61: { left: [0, 0] },
+    62: { left: [0, -1] },
+    63: { right: [0, 1] },
+}
\ No newline at end of file