Add layout files for various wafers: aepwafer, bcdwafer, fwafer, xwafer, zwafer, and zwafer_rev

2026-06-08 15:10:13 -07:00
parent 9cd3170e8a
commit 59528eb6c9
6 changed files with 341 additions and 0 deletions
@@ -0,0 +1,69 @@
+# This will be the name of the output files
+name: xwafer
+wafers: ["X"]
+
+# round or square wafer
+shape: square
+
+# diameter/edge size of the wafer
+size: 310
+
+# large or small markers and labels
+marker_size: small
+font_size: small
+
+# origin settings.  x_origin can be left, right, or center.  y_origin can
+# be top, bottom, or center.  Using right or top implies that the X/Y values
+# for that axis are negative, or else we'll be drawing outside the image.
+x_origin: left
+y_origin: bottom
+
+# sensor X and Y values, in mm relative to the origin
+X: [ 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00,
+    13.00, 23.00, 46.43, 89.86, 133.29, 176.72, 220.15, 263.58, 287.01, 297.01,
+    307.01, 307.01, 307.01, 307.01, 307.01, 307.01, 307.01, 307.01, 307.01,
+    307.01, 307.01, 307.01, 297.01, 287.01, 263.58, 220.15, 176.72, 133.29,
+    89.86, 46.43, 23.00, 13.00, 46.43, 46.43, 46.43, 46.43, 46.43, 46.43,
+    89.86, 133.29, 176.72, 220.15, 263.58, 263.58, 263.58, 263.58, 263.58,
+    263.58, 220.15, 176.72, 133.29, 89.86, 89.86, 89.86, 89.86, 89.86,
+    133.29, 176.72, 220.15, 220.15, 220.15, 220.15, 176.72, 133.29, 133.29,
+    133.29, 176.72, 176.72]
+Y: [ 3.00, 13.07, 23.07, 46.50, 89.93, 133.36, 176.79, 220.22, 263.65, 287.08,
+    297.08, 307.08, 307.08, 307.08, 307.08, 307.08, 307.08, 307.08, 307.08,
+    307.08, 307.08, 307.08, 307.08, 297.08, 287.08, 263.65, 220.22, 176.79,
+    133.36, 89.93, 46.50, 23.07, 13.07, 3.00, 3.00, 3.00, 3.00, 3.00, 3.00,
+    3.00, 3.00, 3.00, 3.00, 3.00, 46.50, 89.93, 133.36, 176.79, 220.22, 263.65,
+    263.65, 263.65, 263.65, 263.65, 263.65, 220.22, 176.79, 133.36, 89.93,
+    46.50, 46.50, 46.50, 46.50, 46.50, 89.93, 133.36, 176.79, 220.22, 220.22,
+    220.22, 220.22, 176.79, 133.36, 89.93, 89.93, 89.93, 133.36, 176.79,
+    176.79, 133.36 ]
+
+# set this to either 0 or 1 for the initial sensor number (usually 1)
+start_sn: 1
+
+# Normally, positive X is to the right, and positive Y is up.
+# These settings can be used to reverse one or both of these.
+reverse_x: false
+reverse_y: false
+
+# these are sensors whose labels need to be repositioned.  Sensor numbers
+# start at start_sn.  Directions are up, down, left, and right, and values
+# are multiples of the marker size.
+label_exceptions: {
+    21: { left: [0, 0] },
+    22: { left: [0, 0] },
+    23: { left: [0, 0] },
+    24: { left: [0, 0] },
+    25: { left: [0, 0] },
+    26: { left: [0, 0] },
+    27: { left: [0, 0] },
+    28: { left: [0, 0] },
+    29: { left: [0, 0] },
+    30: { left: [0, 0] },
+    31: { left: [0, 0] },
+    32: { left: [0, 0] },
+    33: { left: [0, 0] },
+    34: { left: [0, 0] },
+    35: { left: [0, 0] },
+    36: { left: [0, 0] }
+}